Normas DIN
Filtrar:
DIN
DIN EN 2835:2012-06
En Vigor
2012-06-01
Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness
40 IRHD; German and English version EN 2835:2012
DIN
DIN EN 302878-4:2012-07
En Vigor
2012-07-01
Access, Terminals, Transmission and Multiplexing (ATTM) - Third
Generation Transmission Systems for Interactive Cable Television
Services - IP Cable Modems - Part 4: MAC and Upper Layer Protocols,
DOCSIS 3.0 (Endorsement of the English version EN 302878-4 V1.1.1
(2011-11) as German standard) / Note: DIN ETS standards
collection*Endorsement notice
DIN
DIN EN 60870-6-502:1997-08
En Vigor
1997-08-01
Telecontrol equipment and systems - Part 6: Telecontrol protocols
compatible with ISO standards and ITU-T recommendations; section 502:
TASE.1 protocol definitions (IEC 60870-6-502:1995); German version EN 60870-6-502:1996
DIN
DIN EN 3932:2001-10
En Vigor
2001-10-01
Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal
for brazing, amorphous foil; German version EN 3932:2001
DIN
DIN EN 15099-1:2007-08
En Vigor
2007-08-01
Irrigation techniques - Remote monitoring and control for irrigation
systems - Part 1: General considerations; German version EN 15099-1:2007
DIN
DIN 30674-3:2001-03
En Vigor
2001-03-01
Sheathing ductile cast iron pipes - Part 3: Zinc coating with protective sheathing
DIN
DIN EN 301002-2:2002-11
En Vigor
2002-11-01
Integrated Services Digital Network (ISDN) - Security tools (SET)
procedures; Digital Subscriber Signalling System No. one (DSS1) protocol
- Part 2: Protocol Implementation Conformance Statement (PICS) proforma
specification (Endorsement of the English version EN 301002-2 V 1.3.1
(2001-06) as German Standard) / Note: DIN ETS standards
collection*Endorsement notice
DIN
DIN EN 4604-004:2008-02
En Vigor
2008-02-01
Aerospace series - Cable, electrical, for signal transmission - Part
004: Cable, microcoaxial, high immunity, 50 Ohms, 200 °C, type WS -
Product standard; German and English version EN 4604-004:2007
DIN
DIN ISO 9183-1:2011-05
En Vigor
2011-05-01
Tools for pressing - Wear plates for press dies - Part 1: Typ A (ISO 9183-1:2008)
DIN
DIN EN 1997-2/NA:2010-12
En Vigor
2010-12-01
National Annex - Nationally determined parameters - Eurocode 7:
Geotechnical design - Part 2: Ground investigation and testing / Note:
Applies in conjunction with DIN EN 1997-2 (2010-10).
DIN
DIN EN 13274-5:2001-10
En Vigor
2001-10-01
Respiratory protective devices - Methods of test - Part 5: Climatic
conditions; German version EN 13274-5:2001
DIN
DIN EN ISO 535:2023-06
En Vigor
2023-06-01
Paper and board - Determination of water absorptiveness - Cobb method
(ISO 535:2023); German version EN ISO 535:2023
DIN
DIN ISO 10668:2011-10
En Vigor
2011-10-01
Brand valuation - Requirements for monetary brand valuation (ISO 10668:2010)
DIN
DIN EN 302408:2004-03
En Vigor
2004-03-01
Digital cellular telecommunications system (Phase 2+) - GSM Cordless
Telephony System (CTS), Phase 1 - CTS-FP Radio subsystem (GSM 05.56
version 8.0.1 Release 1999) (Endorsement of the English version EN
302408 V8.0.1 (2000-10) as German standard) / Note: DIN ETS standards
collection*Endorsement notice
DIN
DIN EN 14152:2014-08
En Vigor
2014-08-01
Foodstuffs - Determination of vitamin B2 by high performance liquid
chromatography; German version EN 14152:2014
DIN
DIN EN 13775-6:2004-09
En Vigor
2004-09-01
Railway applications - Measuring of new and modified freight wagons -
Part 6: Multiple and articulated wagons; German version EN 13775-6:2004
DIN
DIN EN 15763:2010-04
En Vigor
2010-04-01
Foodstuffs - Determination of trace elements - Determination of arsenic,
cadmium, mercury and lead in foodstuffs by inductively coupled plasma
mass spectrometry (ICP-MS) after pressure digestion; German version EN 15763:2009
DIN
DIN EN 60297-3-106:2011-01
En Vigor
2011-01-01
Mechanical structures for electronic equipment - Dimensions of
mechanical structures of the 482,6 mm (19 in) series - Part 3-106:
Adaptation dimensions for subracks and chassis applicable with metric
cabinets or racks in accordance with IEC 60917-2-1 (IEC
60297-3-106:2010); German version EN 60297-3-106:2010
DIN
DIN EN 1011-3:2019-06
En Vigor
2019-06-01
Welding - Recommendations for welding of metallic materials - Part 3:
Arc welding of stainless steels; German version EN 1011-3:2018
DIN
DIN EN 13084-8:2005-08
En Vigor
2005-08-01
Free-standing industrial chimneys - Part 8: Design and execution of mast
construction with satellite components; German version EN 13084-8:2005
DIN
DIN
DIN EN 13742-2:2005-02
En Vigor
2005-02-01
Irrigation techniques - Solid set sprinkler systems - Part 2: Test
methods; German version EN 13742-2:2004
DIN
DIN EN 14617-11:2005-06
En Vigor
2005-06-01
Agglomerated stone - Test methods - Part 11: Determination of linear
thermal expansion coefficient; German version EN 14617-11:2005
DIN
DIN EN 1398:2009-07
En Vigor
2009-07-01
Dock levellers - Safety requirements; German version EN 1398:2009 /
Note: DIN EN 1398 (1997-11) remains valid alongside this standard until 2009-12-28.
DIN
DIN EN 438-7:2005-04
En Vigor
2005-04-01
High-pressure decorative laminates (HPL) - Sheets based on thermosetting
resins (usually called laminates) - Part 7: Compact laminate and HPL
composite panels for internal and external wall and ceiling finishes;
German version EN 438-7:2005 / Note: To be replaced by DIN EN 438-7
(2014-11), DIN EN 438-7 (2019-09).
DIN
DIN EN 572-7:2012-11
En Vigor
2012-11-01
Glass in building - Basic soda lime silicate glass products - Part 7:
Wired or unwired channel shaped glass; German version EN 572-7:2012
DIN
DIN EN 1208:2005-06
En Vigor
2005-06-01
Chemicals used for treatment of water intended for human consumption -
Sodium calcium polyphosphate; German version EN 1208:2005
DIN
DIN EN ISO 9233-1:2018-08
En Vigor
2018-08-01
Cheese, cheese rind and processed cheese - Determination of natamycin
content - Part 1: Molecular absorption spectrometric method for cheese
rind (ISO 9233-1:2018); German version EN ISO 9233-1:2018
DIN
DIN EN 301455-1:2001-05
En Vigor
2001-05-01
Private Integrated Services Network (PISN) - Inter-exchange signalling
protocol; Cordless Terminal Incoming Call additional network feature
(ANF-CTMI) for the VPN "b" service entry point - Part 1: Test
Suite structure and Test Purposes (TSS&TP) (Endorsement of the
English version EN 301455-1 V 1.1.4 (2000-09) as German standard) /
Note: Endorsement notice
DIN
DIN EN 61014:2004-02
En Vigor
2004-02-01
Programmes for reliability growth (IEC 61014:2003); German version EN
61014:2003 / Note: DIN IEC 61014 (1993-01) remains valid alongside this
standard until 2006-09-01.*To be replaced by DIN EN 61014 (2014-03).
DIN
DIN
DIN EN 1559-1:2011-05
En Vigor
2011-05-01
Founding - Technical conditions of delivery - Part 1: General; German
version EN 1559-1:2011
DIN
DIN 74085:1992-08
En Vigor
1992-08-01
Coupling devices for articulated road trains; steering wedge;
dimensions, requirements
DIN
DIN 18132:2012-04
En Vigor
2012-04-01
Soil, testing procedures and testing equipment - Determination of water absorption
DIN
DIN 65492:1993-09
En Vigor
1993-09-01
Aerospace; fasteners for structural application; rotary fasteners; receptacle
DIN
DIN EN 302636-2:2014-02
En Vigor
2014-02-01
Intelligent Transport Systems (ITS) - Vehicular Communications -
GeoNetworking - Part 2: Scenarios (Endorsement of the English version EN
302 636-2 V1.2.1 (2013-11) as German standard) / Note: DIN ETS standards
collection*Endorsement notice
DIN
DIN EN 12209:2025-12
En Vigor
2025-12-01
Building hardware - Mechanically operated locks and locking plates -
Characteristics and test methods; German version EN 12209:2024 / Note:
To be amended by DIN EN 12209/A1 (2026-05).
DIN
DIN EN 2883:2009-10
En Vigor
2009-10-01
Aerospace series - Nuts, hexagonal, self-locking, with counterbore and
captive washer, in heat resisting steel, MoS<(Index)2> lubricated
- Classification: 1100 MPa (at ambient temperature)/315 °C; German and
English version EN 2883:2009 / Note: To be replaced by DIN EN 2883 (2026-06).
DIN
DIN EN 60915 Berichtigung 1:2009-07
En Vigor
2009-07-01
Fixed capcitors and resistors for use in electronic equipment -
Preferred dimensions of shaft ends, bushes and for the mounting of
single-hole, bush-mounted, shaft-operated electronic components (IEC
60915:2006 + corrigendum 2007); German version EN 60915:2007,
Corrigendum to DIN EN 60915:2008-04; German version CENELEC-Cor.:2009 to
EN 60915:2007
DIN
DIN EN 14654-1:2022-12
En Vigor
2022-12-01
Drain and sewer systems outside buildings - Management and control of
activities - Part 1: General requirements; German version EN 14654-1:2021
