SAE J516_199006
HYDRAULIC HOSE FITTINGS
| * Secure PDF notice: |
The PDF document of the SAE standards that is downloaded will be locked and cannot be transferred to another computer; it is for a single workstation and a single user. The end user must have the FILE OPEN PLUG-IN security system installed. The document can be printed once. |
|---|---|
| Edition date: |
1990-06-01
In Force
|
| Available languages: | English |
| Summary: | This SAE standard provides general and dimensional specifications for the most common hose fittings used in conjunction with hydraulic hoses specified in SAE J517 and utilized in hydraulic systems on mobile and stationary equipment.
The general specifications contained in
Sections 1
through
15
are applicable to all hydraulic hose fittings and supplement the detailed specifications for the 100R-series fittings contained in the later sections of this document.
This document shall be utilized as a procurement document only to the extent agreed upon by the manufacturer and user.
Refer to SAE J517 for specifications of hose and information on hose assemblies. SAE J1273 contains information on application factors affecting hose fittings, hose and hose assemblies.
The following are hose fitting types contained in this document:
a
Male Dryseal pipe thread type hose fittings shall be as shown in
Figures 1A
to
1C
for the respective styles, and in
Tables 1A
to
1M
for the applicable hoses and sizes.
b
Male straight thread O-ring boss type hose fittings shall be as shown in
Figures 2A
and
2B
for the respective styles, and in
Tables 2A
to
2G
for the applicable hoses and sizes.
c
Male 37 degree flared type hose fittings shall be as shown in
Figures 3A
to
3C
for the respective styles, and in
Tables 3A
to
3K
for the applicable hoses and sizes.
d
Female 37 degree flared type hose fittings shall be as shown in
Figures 4A
to
7B
for the respective styles and shapes, and in
Tables 4A
to
4M
for the applicable hoses and sizes.
e
Male 45 degree flared type hose fittings shall be as shown in
Figures 8A
and
8B
for the respective styles, and in
Tables 5A
to
5E
for the applicable hoses and sizes.
f
Female 45 degree flared type hose fittings shall be as shown in
Figures 9A
to
12B
for the respective styles and shapes, and in
Tables 6A
to
6E
for the applicable hoses and sizes.
g
Male flareless type hose fittings shall be as shown in
Figures 13A
and
13B
for the respective styles, and in
Tables 7A
and
7B
for the applicable hoses and sizes.
h
Female flareless type hose fittings shall be as shown in
Figures 14A
to
14C
for the respective styles, and in
Tables 8A
and
8B
for the applicable hoses and sizes.
i
4-bolt split flange type hose fittings shall be as shown in
Figures 15A
to
21C
for the respective styles and shapes, and in
Tables 9A
to
9I2
for the applicable hoses and sizes.
j
Female O-ring face seal hose fittings shall be as shown in
Figures 22A
to
25B
for the respective styles, and
Tables 10A
to
10L
for the applicable hoses and sizes.
k
Adapter unions shall be as shown in
Figures 22
to
25
and
Table 11
.
It is recommended that where step sizes or additional types of fittings are required, they be designed to conform with the specifications of this document insofar as they may apply.
The following general specifications shall supplement the dimensional data contained in the tables with respect to all unspecified detail. |
| CTN: |
Standards cited
Related books
Related standards
Related thematic collections
