DIN ISO 5130:2020-11
Acoustics - Measurements of sound pressure level emitted by stationary road vehicles (ISO 5130:2019)
| Edition date: |
2020-11-01
In Force
|
|---|---|
| Available languages: | English, German |
| Summary: | This sound pressure level measurement procedure has been developed for use in the engineering evaluation of the sound pressure level performance of road vehicles in the vicinity of the exhaust systems. The method is intended to check vehicles in use and also to determine variations in the exhaust sound pressure level that can result from the wear, maladjustment or modification of particular components, when the defect does not appear by visual inspection; the partial or complete removal of devices increasing the emission of certain sound pressure levels. It is possible to determine some of these variations by comparing the measurements with reference measurements made under similar conditions, for example during the type approval of the vehicle, using the same method. Other variations can be detected only when the engine is operated at a realistic load. The document incorporates certain provisions of SAE J1492:2008-10 for measuring the sound pressure levels of exhaust systems of passenger cars and light trucks. |
| Keywords: | Acoustic measurement|Acoustic properties and phenomena|Acoustic testing|Acoustics|Definitions|Inspection|Measurement|Measuring results|Measuring techniques|Motor vehicles|Noise|Noise emissions|Noise (environmental)|Noise measurement|Noise reduction|Road vehicles|Rotational speeds|Sound levels|Sound pressure level|Stationary|Stationary noise|Test benches|Test reports|Testing|Testing conditions|Vehicles |
| ICS: | 43.020-Road vehicles in general, 17.140.30-Noise emitted by means of transport |
| CTN: | |
|
International Equivalence |
Identic ISO 5130:2019 |
|
Reemplazo Normas |
Reemplaza a DIN ISO 5130:2017-12 Reemplaza a DIN ISO 5130:2020-05 |










