-50% discount* If you buy the same UNE standard in different languages. * Discount on the lower pvp.

BS EN ISO 11197:2019

Medical supply units

Edition date: 2019-12-10
In Force
Available languages: English
Summary:

IEC 60601‑1:2005+A1:2012, Clause 1 applies except as follows:

201.1.1 Scope

IEC 60601‑1:2005+A1:2012, 1.1 is replaced by:

This document applies to the basic safety and essential performance of medical supply units, hereafter also referred to as ME equipment.

This document applies to medical supply units manufactured within a factory or assembled on site, including cabinetry and other enclosures, which incorporate patientcare services.

NOTE 1 A party that assembles on site various components intended for patient care services into an enclosure is considered the manufacturer of the medical supply unit.

Hazards inherent in the intended function of ME equipment or ME systems within the scope of this document are not covered by specific requirements in this standard, except in of IEC 60601‑1:2005+A1:2012, 7.2.13 and 8.4.1 (see 201.1.4).

NOTE 2 Refer to IEC 60601‑1:2005+A1:2012, 4.2.

201.1.2 Object

IEC 60601‑1:2005+A1:2012, 1.2 is replaced by:

The object of this document is to establish particular basic safety and essential performance requirements for medical supply units as defined in 201.3.201.

201.1.3 Related standards

201.1.3.1 General and Collateral standards

IEC 60601‑1:2005+A1:2012, 1.3 applies as the General Standard with the following addition:

This particular standard refers to those applicable collateral standards that are listed in IEC 60601‑1:2005+A1:2012, Clause 2 as well as 201.2 of this particular standard.

IEC 60601‑1‑3:2008+A1:2013, IEC 60601‑1‑8:2006+A1:2012, IEC 60601‑1‑9:2007, IEC 60601‑1‑10:2007+A1:2013 and IEC 60601‑1‑11 and IEC 60601‑1‑12 do not apply.

NOTE Collateral standards are referred to by their document numbers.

201.1.3.2 Particular standards

IEC 60601‑1:2005+A1:2012, 1.4 applies with the following additions:

The numbering of sections, clauses and subclauses of this particular standard corresponds to that of IEC 60601‑1:2005+A1:2012 with the prefix “201” (e.g. 201.1 in this standard addresses the content of IEC 60601‑1:2005+A1:2012 Clause 1) or applicable collateral standard with the prefix “20x” where x is the final digit(s) of the collateral standard document number (e.g. 202.4 in this particular standard addresses the content of Clause 4 of the IEC 60601‑1‑2 collateral standard, 203.4 in this particular standard addresses the content of Clause 4 of the IEC 60601‑1‑3 collateral standard, etc.). The changes to the text of IEC 60601‑1:2005+A1:2012 are specified by the use of the following words:

  • “Replacement” means that the clause or subclause of IEC 60601‑1:2005+A1:2012 or applicable collateral standard is replaced completely by the text of this particular standard.

  • “Addition” means that the text of this particular standard is additional to the requirements of IEC 60601‑1:2005+A1:2012 or applicable collateral standard.

  • “Amendment” means that the clause or subclause of IEC 60601‑1:2005+A1:2012 or applicable collateral standard is amended as indicated by the text of this particular standard.

Subclauses or figures which are additional to those of IEC 60601‑1:2005+A1:2012 are numbered starting from 201.101. Additional Annexes are lettered AA, BB, etc., and additional items aa), bb), etc.

Subclauses or figures which are additional to those of a collateral standard are numbered starting from 20x, where “x” is the number of the collateral standard, e.g. 202 for IEC 60601‑1‑2, 203 for IEC 60601‑1‑3, etc.

The term “this standard” is used to make reference to IEC 60601‑1:2005+A1:2012, any applicable collateral standards and this particular standard taken together.

Where there is no corresponding section, clause or subclause in this particular standard, the section, clause or subclause of IEC 60601‑1:2005+A1:2012 or applicable collateral standard, although possibly not relevant, applies without modification; where it is intended that any part of IEC 60601‑1:2005+A1:2012 or applicable collateral standard, although possibly relevant, is not to be applied, a statement to that effect is given in this particular standard.

IEC 60601‑1:2005+A1:2012, Clause 1 applies except as follows:

201.1.1 Scope

IEC 60601‑1:2005+A1:2012, 1.1 is replaced by:

This document applies to the basic safety and essential performance of medical supply units, hereafter also referred to as ME equipment.

This document applies to medical supply units manufactured within a factory or assembled on site, including cabinetry and other enclosures, which incorporate patientcare services.

NOTE 1 A party that assembles on site various components intended for patient care services into an enclosure is considered the manufacturer of the medical supply unit.

Hazards inherent in the intended function of ME equipment or ME systems within the scope of this document are not covered by specific requirements in this standard, except in of IEC 60601‑1:2005+A1:2012, 7.2.13 and 8.4.1 (see 201.1.4).

NOTE 2 Refer to IEC 60601‑1:2005+A1:2012, 4.2.

201.1.2 Object

IEC 60601‑1:2005+A1:2012, 1.2 is replaced by:

The object of this document is to establish particular basic safety and essential performance requirements for medical supply units as defined in 201.3.201.

201.1.3 Related standards

201.1.3.1 General and Collateral standards

IEC 60601‑1:2005+A1:2012, 1.3 applies as the General Standard with the following addition:

This particular standard refers to those applicable collateral standards that are listed in IEC 60601‑1:2005+A1:2012, Clause 2 as well as 201.2 of this particular standard.

IEC 60601‑1‑3:2008+A1:2013, IEC 60601‑1‑8:2006+A1:2012, IEC 60601‑1‑9:2007, IEC 60601‑1‑10:2007+A1:2013 and IEC 60601‑1‑11 and IEC 60601‑1‑12 do not apply.

NOTE Collateral standards are referred to by their document numbers.

201.1.3.2 Particular standards

IEC 60601‑1:2005+A1:2012, 1.4 applies with the following additions:

The numbering of sections, clauses and subclauses of this particular standard corresponds to that of IEC 60601‑1:2005+A1:2012 with the prefix “201” (e.g. 201.1 in this standard addresses the content of IEC 60601‑1:2005+A1:2012 Clause 1) or applicable collateral standard with the prefix “20x” where x is the final digit(s) of the collateral standard document number (e.g. 202.4 in this particular standard addresses the content of Clause 4 of the IEC 60601‑1‑2 collateral standard, 203.4 in this particular standard addresses the content of Clause 4 of the IEC 60601‑1‑3 collateral standard, etc.). The changes to the text of IEC 60601‑1:2005+A1:2012 are specified by the use of the following words:

  • “Replacement” means that the clause or subclause of IEC 60601‑1:2005+A1:2012 or applicable collateral standard is replaced completely by the text of this particular standard.

  • “Addition” means that the text of this particular standard is additional to the requirements of IEC 60601‑1:2005+A1:2012 or applicable collateral standard.

  • “Amendment” means that the clause or subclause of IEC 60601‑1:2005+A1:2012 or applicable collateral standard is amended as indicated by the text of this particular standard.

Subclauses or figures which are additional to those of IEC 60601‑1:2005+A1:2012 are numbered starting from 201.101. Additional Annexes are lettered AA, BB, etc., and additional items aa), bb), etc.

Subclauses or figures which are additional to those of a collateral standard are numbered starting from 20x, where “x” is the number of the collateral standard, e.g. 202 for IEC 60601‑1‑2, 203 for IEC 60601‑1‑3, etc.

The term “this standard” is used to make reference to IEC 60601‑1:2005+A1:2012, any applicable collateral standards and this particular standard taken together.

Where there is no corresponding section, clause or subclause in this particular standard, the section, clause or subclause of IEC 60601‑1:2005+A1:2012 or applicable collateral standard, although possibly not relevant, applies without modification; where it is intended that any part of IEC 60601‑1:2005+A1:2012 or applicable collateral standard, although possibly relevant, is not to be applied, a statement to that effect is given in this particular standard.
ICS:
CTN: CH/121/6 - CH/121/6

International Equivalence

Identic EN ISO 11197

Identic ISO 11197

Reemplazo Normas

Reemplaza a BS EN ISO 11197:2016

The book in the author's words

Ultricies magna feugiat malesuada sociosqu varius vivamus cubilia parturient, himenaeos vitae vehicula nam placerat netus urna platea, nostra rutrum felis mattis penatibus velit quisque.

Button
Frequently Asked Questions Do you have any questions about our products?
  • Standards UNE, EN, ISO, IEC, BSI, DIN, ASTM, AFNOR, IEEE, SAE
  • In addition, you can request the rules of the rest of the organizations through the e-mail normas@aenor.com
  • Technical books on paper and in electronic format (PDF, epub).

The standards can be purchased in PDF, reading or paper. The reading standards are not download files, they can only be viewed in the client area. The standards ordered on paper and some of the books in the catalogue are printed on demand. 

Check deadlines in normas@aenor.com.

The license of use is for one user and one device, if you want to reproduce the content of the standard, you must request a license that will have an additional cost. Send us your inquiry here 

The AENOR standards and books that appear in the online store can only be purchased exclusively through the website. AENOR does not have a physical store.

Purchase procedure: by clicking on "Buy" the desired products will go to the shopping cart. If there are display problems, the recommended browser is Chrome.

To formalize the purchase you must access the customer area. If you are not registered as a customer, you must fill in a form with the data along with a password and username. This will create the account.

Once the "Customer data" form has been completed, "Order in progress" will be displayed with all the items loaded in the shopping cart, their prices, taxes established in current legislation and shipping costs if applicable.

The prices of the standards and books that appear in the various sections do not include taxes or shipping costs.

AENOR promotional codes consist of alphanumeric characters and can only be applied to online purchases, received through a specific offer and for a limited time. To apply your promotional code, you just have to enter it in step 2 of 4 of the purchase process on the website and click on "apply", after you have identified yourself and chosen the payment methods. Promo codes are not cumulative.

 

  • Credit or debit card (Visa, Mastercard) and PayPal.
  • Bank transfer. If you opt for this form of payment, you must first send AENOR a copy of the transfer by email to normas@aenor.com
  • The purchase invoice can be downloaded from the customer area, in my previous orders

In the case of clients of companies based abroad, the taxpayer identification number of the corresponding country (for example, in Argentina the CUIT), must be filled in the CIF/NIF - VAT field .

  • Direct download via the website in the Customer Area. In the customer area, which can only be accessed with a password and username, the products purchased will be available for a period of fifteen days from the date of purchase, as long as the payment has been accepted. Files in digital format are protected and in no case editable. Before purchasing them, it is important that the license of use is read and accepted as a prior step to purchase.
  • Shipping by courier. Products purchased on physical media are shipped by courier. The maximum delivery time in Spanish territory, from the acceptance of the order by AENOR, is:
  •  Approximately seven working days for all standards purchased through the store in paper format.
  • Approximately three days for books purchased through the store. Stocks of paper books are limited and their offer on the website does not imply availability within the indicated period. In the event that the requested book is not available, the customer is notified of the delay in receiving the order, which will be approximately seven working days. 

For the rest of the products that are not on the website, check availability and delivery time at normas@aenor.com.

1. For digital products (PDF, Epub), once delivery has been made by direct download via the website in the Customer Area, you will not have the right to exercise your right of withdrawal.

2. For personalised products on paper, once the purchase has been made, you will not have the right to exercise your right of withdrawal.

3.  For all other paper products, you have the right to withdraw from the sale within 14 calendar days from the date of purchase. Remember that for the return it is essential that the product is in perfect condition, sealed by the packaging and preserving its original packaging. The customer will be responsible for pickup and shipping costs.

The order invoice includes shipping costs, so there is no amount to pay to the courier. Shipping costs are calculated based on both the final destination of the order and the number of products ordered. They include transport and packaging costs. Shipping costs are subject to periodic revisions. Outlet books will have free shipping costs only if the shipment is made in the Peninsula.

Destination Up to three standards and/or publications From three standards and/or publications
Peninsula 7,31€ 8,60€
Balearic Islands 18,04€ 23,34€
Canary Islands, Ceuta and Melilla  18,04€ 23,34€
Europe 59,17€ 80,07€
United States and Canada 70,07€ 96,94€
Rest of the world 91,94€ 115,91€
  • Purchases made by residents of the Member States of the European Union will be subject to the payment of VAT (value added tax).
  • ​​
  • In the case of legal persons and natural persons who, acting as entrepreneurs, are domiciled in a Member State of the European Union (except residents in Spain) and have an intra-community NIF/VAT registered in the VIES census, they will be exempt from paying VAT, being an essential condition the sending of this document by email to normas@aenor.com.
  • Purchases made in a private capacity (natural person), regardless of where they have their residence, will be subject to the payment of VAT.
  • Purchases made by entities in non-EU countries will be exempt from paying VAT, as long as they send the corresponding tax residence document by email to normas@aenor.com.
  • The sale operations will be understood to have been carried out at AENOR's registered office: Génova 6, 28004, Madrid – Spain. 

The contract for the purchase of products through this Website shall be governed by Spanish law. Any dispute arising out of or in connection with the use of the Website or such contract shall be subject to the exclusive jurisdiction of the Courts and Tribunals of Madrid.

Notwithstanding the foregoing, if you are entering into this contract as a consumer under the terms of Royal Decree 1/2007, nothing in this clause shall affect the rights that may be granted to you as such under applicable law.