-50% discount* If you buy the same UNE standard in different languages. * Discount on the lower pvp.

ASTM G88 - 21

Standard Guide for Designing Systems for Oxygen Service

Warning: ASTM standards for reading are viewed through the client area. Thefilescannot be downloaded.
Edition date: 2021-10-01
In Force
Available languages: English
Summary:

Keywords: burning; burn-resistant materials; combustion; contamination; fire; heat of compression; ignition; oxygen-enriched atmosphere; oxygen service; oxygen system; particle impact; propagation; system cleanness;
Scope:

1.1 This guide applies to the design of systems for oxygen or oxygen-enriched service but is not a comprehensive document. Specifically, this guide addresses system factors that affect the avoidance of ignition and fire. It does not thoroughly address the selection of materials of construction for which Guides G63 and G94 are available, nor does it cover mechanical, economic or other design considerations for which well-known practices are available. This guide also does not address issues concerning the toxicity of nonmetals in breathing gas or medical gas systems.

Note 1: The American Society for Testing and Materials takes no position respecting the validity of any evaluation methods asserted in connection with any item mentioned in this guide. Users of this guide are expressly advised that determination of the validity of any such evaluation methods and data and the risk of use of such evaluation methods and data are entirely their own responsibility.

1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.3 This standard guide is organized as follows:

Section Title

Section

Referenced Documents

2

 ASTM Standards

2.1

 ASTM Adjuncts

2.2

 ASTM Manuals

2.3

 NFPA Documents

2.4

 CGA Documents

2.5

 EIGA Documents

2.6

Terminology

3

Significance and Use

4

 Purpose of G88

4.1

 Role of G88

4.2

 Use of G88

4.3

Factors Affecting the Design for an Oxygen or Oxygen-
 Enriched System

5

 General

5.1

 Factors Recognized as Causing Fires

5.2

  Temperature

5.2.1

  Spontaneous Ignition

5.2.2

  Pressure

5.2.3

  Concentration

5.2.4

  Contamination

5.2.5

  Particle Impact

5.2.6

  Heat of Compression

5.2.7

  Friction and Galling

5.2.8

  Resonance

5.2.9

  Static Electric Discharge

5.2.10

  Electrical Arc

5.2.11

  Flow Friction

5.2.12

  Mechanical Impact

5.2.13

  Kindling Chain

5.2.14

  Other Ignition Mechanisms

5.2.15

Test Methods

6

System Design Method

7

 Overview

7.1

 Final Design

7.2

 Avoid Unnecessarily Elevated Temperatures

7.3

 Avoid Unnecessarily Elevated Pressures

7.4

 Design for System Cleanness

7.5

 Avoid Particle Impacts

7.6

 Minimize Heat of Compression

7.7

 Avoid Friction and Galling

7.8

 Avoid Corrosion

7.9

 Avoid Resonance

7.10

 Use Proven Hardware

7.11

 Design to Manage Fires

7.12

 Anticipate Indirect Oxygen Exposure

7.13

 Minimize Available Fuel/Oxygen

7.14

 Avoid Potentially Exothermic Material Combinations

7.15

 Anticipate Common Failure Mechanism Consequences

7.16

 Avoid High Surface-Area-to-Volume (S/V) Conditions
  where Practical

7.17

 Avoid Unnecessarily-Elevated Oxygen Concentrations

7.18

 Anticipate Permutations from Intended System Design

7.19

 Avoid Designs and Failure Scenarios that can Introduce
  Potential Flow Friction Ignition Hazards

7.20

 Use Only the Most Compatible of Practical Materials
  and Designs

7.21

 Provide Thorough Safety Training for All Personnel
  Working with Oxygen or Oxygen-Enriched
  Components or Systems, including Design,
  Cleaning, Assembly, Operations, and
  Maintenance as Applicable to Personnel

7.22

 Miscellaneous

7.23

Examples

8

Key Words

9

References

 

1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ICS: 11.040.10-Anaesthetic, respiratory and reanimation equipment
CTN: G04.02 - G04.02

Standards Cancellations

Anula a G0088-13E01

Otras Relaciones

Es referenciada por G145 - 08(2023)

Es referenciada por G0074-13R21

Es referenciada por D5885_D5885M-20

Es referenciada por F1792-97R21

Es referenciada por E2349-19

Es referenciada por G0093_G0093M-19

Es referenciada por G0124-18

Es referenciada por G0128_G0128M-15R23

Es referenciada por G0094-22

Es referenciada por G0063-15R23

Es referenciada por G86 - 17(2025)

Es referenciada por G126 - 16(2023)

Es referenciada por G175 - 24

The book in the author's words

Ultricies magna feugiat malesuada sociosqu varius vivamus cubilia parturient, himenaeos vitae vehicula nam placerat netus urna platea, nostra rutrum felis mattis penatibus velit quisque.

Button
Frequently Asked Questions Do you have any questions about our products?
  • Standards UNE, EN, ISO, IEC, BSI, DIN, ASTM, AFNOR, IEEE, SAE
  • In addition, you can request the rules of the rest of the organizations through the e-mail normas@aenor.com
  • Technical books on paper and in electronic format (PDF, epub).

The standards can be purchased in PDF, reading or paper. The reading standards are not download files, they can only be viewed in the client area. The standards ordered on paper and some of the books in the catalogue are printed on demand. 

Check deadlines in normas@aenor.com.

The license of use is for one user and one device, if you want to reproduce the content of the standard, you must request a license that will have an additional cost. Send us your inquiry here 

The AENOR standards and books that appear in the online store can only be purchased exclusively through the website. AENOR does not have a physical store.

Purchase procedure: by clicking on "Buy" the desired products will go to the shopping cart. If there are display problems, the recommended browser is Chrome.

To formalize the purchase you must access the customer area. If you are not registered as a customer, you must fill in a form with the data along with a password and username. This will create the account.

Once the "Customer data" form has been completed, "Order in progress" will be displayed with all the items loaded in the shopping cart, their prices, taxes established in current legislation and shipping costs if applicable.

The prices of the standards and books that appear in the various sections do not include taxes or shipping costs.

AENOR promotional codes consist of alphanumeric characters and can only be applied to online purchases, received through a specific offer and for a limited time. To apply your promotional code, you just have to enter it in step 2 of 4 of the purchase process on the website and click on "apply", after you have identified yourself and chosen the payment methods. Promo codes are not cumulative.

 

  • Credit or debit card (Visa, Mastercard) and PayPal.
  • Bank transfer. If you opt for this form of payment, you must first send AENOR a copy of the transfer by email to normas@aenor.com
  • The purchase invoice can be downloaded from the customer area, in my previous orders

In the case of clients of companies based abroad, the taxpayer identification number of the corresponding country (for example, in Argentina the CUIT), must be filled in the CIF/NIF - VAT field .

  • Direct download via the website in the Customer Area. In the customer area, which can only be accessed with a password and username, the products purchased will be available for a period of fifteen days from the date of purchase, as long as the payment has been accepted. Files in digital format are protected and in no case editable. Before purchasing them, it is important that the license of use is read and accepted as a prior step to purchase.
  • Shipping by courier. Products purchased on physical media are shipped by courier. The maximum delivery time in Spanish territory, from the acceptance of the order by AENOR, is:
  •  Approximately seven working days for all standards purchased through the store in paper format.
  • Approximately three days for books purchased through the store. Stocks of paper books are limited and their offer on the website does not imply availability within the indicated period. In the event that the requested book is not available, the customer is notified of the delay in receiving the order, which will be approximately seven working days. 

For the rest of the products that are not on the website, check availability and delivery time at normas@aenor.com.

1. For digital products (PDF, Epub), once delivery has been made by direct download via the website in the Customer Area, you will not have the right to exercise your right of withdrawal.

2. For personalised products on paper, once the purchase has been made, you will not have the right to exercise your right of withdrawal.

3.  For all other paper products, you have the right to withdraw from the sale within 14 calendar days from the date of purchase. Remember that for the return it is essential that the product is in perfect condition, sealed by the packaging and preserving its original packaging. The customer will be responsible for pickup and shipping costs.

The order invoice includes shipping costs, so there is no amount to pay to the courier. Shipping costs are calculated based on both the final destination of the order and the number of products ordered. They include transport and packaging costs. Shipping costs are subject to periodic revisions. Outlet books will have free shipping costs only if the shipment is made in the Peninsula.

Destination Up to three standards and/or publications From three standards and/or publications
Peninsula 7,31€ 8,60€
Balearic Islands 18,04€ 23,34€
Canary Islands, Ceuta and Melilla  18,04€ 23,34€
Europe 59,17€ 80,07€
United States and Canada 70,07€ 96,94€
Rest of the world 91,94€ 115,91€
  • Purchases made by residents of the Member States of the European Union will be subject to the payment of VAT (value added tax).
  • ​​
  • In the case of legal persons and natural persons who, acting as entrepreneurs, are domiciled in a Member State of the European Union (except residents in Spain) and have an intra-community NIF/VAT registered in the VIES census, they will be exempt from paying VAT, being an essential condition the sending of this document by email to normas@aenor.com.
  • Purchases made in a private capacity (natural person), regardless of where they have their residence, will be subject to the payment of VAT.
  • Purchases made by entities in non-EU countries will be exempt from paying VAT, as long as they send the corresponding tax residence document by email to normas@aenor.com.
  • The sale operations will be understood to have been carried out at AENOR's registered office: Génova 6, 28004, Madrid – Spain. 

The contract for the purchase of products through this Website shall be governed by Spanish law. Any dispute arising out of or in connection with the use of the Website or such contract shall be subject to the exclusive jurisdiction of the Courts and Tribunals of Madrid.

Notwithstanding the foregoing, if you are entering into this contract as a consumer under the terms of Royal Decree 1/2007, nothing in this clause shall affect the rights that may be granted to you as such under applicable law.