-50% discount* If you buy the same UNE standard in different languages. * Discount on the lower pvp.

ASTM E3358 - 23a

Standard Guide for Per- and Polyfluoroalkyl Substances Site Screening and Initial Characterization

Warning: ASTM standards for reading are viewed through the client area. Thefilescannot be downloaded.
Edition date: 2023-08-01
In Force
Available languages: English
Summary:

Keywords: AFFF; conceptual site model; corrective action; exposure pathways; initial site characterization; munitions; PFAS; risk assessment; site-screening; stack emissions;
Scope:

1.1 Per- and polyfluoroalkyl substances (PFAS) are a group of over 7,000 manmade compounds consisting of polymeric chains of carbon bonded to fluorine atoms, usually with a polar functional group at the head. This guide recognizes that PFAS can be categorized as polymeric or nonpolymeric, collectively amounting to more than 4,700 Chemical Abstracts Service (CAS)-registered substances. Environmental concerns pertaining to PFAS are centered primarily on the perfluoroalkyl acids (PFAA), a subclass of per-and polyfluoroalkyl substances, which display extreme persistence and chain-length dependent bioaccumulation and adverse effects in biota.

1.2 The regulatory framework for PFAS continues to evolve, both domestically and internationally. The United States Environmental Protection Agency (EPA) is proceeding with a wide-ranging set of PFAS regulatory actions (EPA, 2021). While the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) does not currently recognize PFAS as hazardous substances, the statute does require actions to protect public health and the environment from contaminants and pollutants released to the environment. Other federal regulatory programs, such as the Safe Drinking Water Act are being used to address drinking water supplies adversely impacted by releases of PFAS. The Clean Water Act’s National Pollutant Discharge Elimination System (NPDES) permitting program is tool that both federal and state regulators are using to regulate the inflows of PFAS-impacted wastewaters at both publicly-owned treatment works (POTW) and federally-owned wastewater treatment plants and the concentration of PFAS in permitted effluent. EPA continues to add additional per-and polyfluoroalkyl substances to the list of substances reportable under the federal Toxic Release Inventory (TRI) reporting program. International efforts to address per-and polyfluoroalkyl substances include Australia’s PFAS National Environmental Management Plan, Version 2 (2020), Canada’s Prohibition of Certain Toxic Substances Regulations, (2022), the Stockholm Convention on Persistent Organic Pollutants, and the European Union’s Water Framework Directive (1).2

1.3 Hazardous waste treatment, storage, and disposal facilities (TSDF) currently operating under the Resource Conservation and Recovery Act (RCRA) via a Part B Permit may be ordered to investigate releases of PFAS under a RCRA Corrective Action order. EPA made a policy decision in the 1990s to defer many potential CERCLA enforcement actions to the RCRA Corrective Action Program (EPA, 1999). Permitted TSDFs at refineries may be subject to RCRA Corrective Action, as opposed to other regulatory programs, to address the releases of PFAS associated past and current use of aqueous film-forming foam (AFFF).

1.4 Numerous states and Tribes are using their existing regulatory programs to direct investigation, site remediation, and correction action related to releases of PFAS to soil, groundwater, and surface waters. These actions range from health advisories and guidelines to enforceable regulatory standards. Regulatory considerations include PFAS risks to both human health and ecological receptors that are protected under a broad array of federal, state, and tribal regulatory programs as well as by treaty rights.

1.5 This guide assists users in the identification of real property concerns that may be the source of PFAS releases or that may be adversely impacted by releases of PFAS. The goal of this guide is to assist managers of environmental risk in their resource allocation decision-making.

1.6 This guide does not constitute “All Appropriate Inquiries” as defined in 40 CFR Part 312 and is not intended to provide the user with any of the landowner liability protections codified in CERCLA §101(35)(A)(i), CERCLA §101(40)(B)(iii), or CERCLA §107(q)(1)(A)(viii)..

1.7 This guide describes widely accepted considerations and best practices used in the site screening and initial site characterization process, with specific consideration of the potential for the release of PFAS into the environment. This guide complements but does not replace existing technical guidance and regulatory requirements.

1.8 This guide does not address and is not applicable to sampling and analysis of public or private domestic water supply systems subject to regulation under the Safe Drinking Water Act and state private well testing act requirements. Regulatory agencies responsible for implementing the Safe Drinking Water Act may have established sampling and reporting requirements for public, community, and privately operated water systems.

1.9 All references to specific federal or state programs are current as of the date of publication. The user is cautioned not to rely on this guide alone but to consult directly with the appropriate program and legal counsel regarding this complex and rapidly evolving concern.

1.10 This guide is intended to complement, not replace, existing regulatory requirements or guidance. ASTM International (ASTM) guides are not regulations; they are consensus-based standards that may be followed as needed.

1.11 Units—The values stated in SI units are to be regarded as the standard. Other units, such as fractional units of parts per billion (ppb) and parts per trillion (ppt), are also included in this guide.

1.12 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.13 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ICS: 71.040.50-Physicochemical methods of analysis
CTN: E50.04 - E50.04

Standards Cancellations

Anula a E3358-23

The book in the author's words

Ultricies magna feugiat malesuada sociosqu varius vivamus cubilia parturient, himenaeos vitae vehicula nam placerat netus urna platea, nostra rutrum felis mattis penatibus velit quisque.

Button
Frequently Asked Questions Do you have any questions about our products?
  • Standards UNE, EN, ISO, IEC, BSI, DIN, ASTM, AFNOR, IEEE, SAE
  • In addition, you can request the rules of the rest of the organizations through the e-mail normas@aenor.com
  • Technical books on paper and in electronic format (PDF, epub).

The standards can be purchased in PDF, reading or paper. The reading standards are not download files, they can only be viewed in the client area. The standards ordered on paper and some of the books in the catalogue are printed on demand. 

Check deadlines in normas@aenor.com.

The license of use is for one user and one device, if you want to reproduce the content of the standard, you must request a license that will have an additional cost. Send us your inquiry here 

The AENOR standards and books that appear in the online store can only be purchased exclusively through the website. AENOR does not have a physical store.

Purchase procedure: by clicking on "Buy" the desired products will go to the shopping cart. If there are display problems, the recommended browser is Chrome.

To formalize the purchase you must access the customer area. If you are not registered as a customer, you must fill in a form with the data along with a password and username. This will create the account.

Once the "Customer data" form has been completed, "Order in progress" will be displayed with all the items loaded in the shopping cart, their prices, taxes established in current legislation and shipping costs if applicable.

The prices of the standards and books that appear in the various sections do not include taxes or shipping costs.

AENOR promotional codes consist of alphanumeric characters and can only be applied to online purchases, received through a specific offer and for a limited time. To apply your promotional code, you just have to enter it in step 2 of 4 of the purchase process on the website and click on "apply", after you have identified yourself and chosen the payment methods. Promo codes are not cumulative.

 

  • Credit or debit card (Visa, Mastercard) and PayPal.
  • Bank transfer. If you opt for this form of payment, you must first send AENOR a copy of the transfer by email to normas@aenor.com
  • The purchase invoice can be downloaded from the customer area, in my previous orders

In the case of clients of companies based abroad, the taxpayer identification number of the corresponding country (for example, in Argentina the CUIT), must be filled in the CIF/NIF - VAT field .

  • Direct download via the website in the Customer Area. In the customer area, which can only be accessed with a password and username, the products purchased will be available for a period of fifteen days from the date of purchase, as long as the payment has been accepted. Files in digital format are protected and in no case editable. Before purchasing them, it is important that the license of use is read and accepted as a prior step to purchase.
  • Shipping by courier. Products purchased on physical media are shipped by courier. The maximum delivery time in Spanish territory, from the acceptance of the order by AENOR, is:
  •  Approximately seven working days for all standards purchased through the store in paper format.
  • Approximately three days for books purchased through the store. Stocks of paper books are limited and their offer on the website does not imply availability within the indicated period. In the event that the requested book is not available, the customer is notified of the delay in receiving the order, which will be approximately seven working days. 

For the rest of the products that are not on the website, check availability and delivery time at normas@aenor.com.

1. For digital products (PDF, Epub), once delivery has been made by direct download via the website in the Customer Area, you will not have the right to exercise your right of withdrawal.

2. For personalised products on paper, once the purchase has been made, you will not have the right to exercise your right of withdrawal.

3.  For all other paper products, you have the right to withdraw from the sale within 14 calendar days from the date of purchase. Remember that for the return it is essential that the product is in perfect condition, sealed by the packaging and preserving its original packaging. The customer will be responsible for pickup and shipping costs.

The order invoice includes shipping costs, so there is no amount to pay to the courier. Shipping costs are calculated based on both the final destination of the order and the number of products ordered. They include transport and packaging costs. Shipping costs are subject to periodic revisions. Outlet books will have free shipping costs only if the shipment is made in the Peninsula.

Destination Up to three standards and/or publications From three standards and/or publications
Peninsula 7,31€ 8,60€
Balearic Islands 18,04€ 23,34€
Canary Islands, Ceuta and Melilla  18,04€ 23,34€
Europe 59,17€ 80,07€
United States and Canada 70,07€ 96,94€
Rest of the world 91,94€ 115,91€
  • Purchases made by residents of the Member States of the European Union will be subject to the payment of VAT (value added tax).
  • ​​
  • In the case of legal persons and natural persons who, acting as entrepreneurs, are domiciled in a Member State of the European Union (except residents in Spain) and have an intra-community NIF/VAT registered in the VIES census, they will be exempt from paying VAT, being an essential condition the sending of this document by email to normas@aenor.com.
  • Purchases made in a private capacity (natural person), regardless of where they have their residence, will be subject to the payment of VAT.
  • Purchases made by entities in non-EU countries will be exempt from paying VAT, as long as they send the corresponding tax residence document by email to normas@aenor.com.
  • The sale operations will be understood to have been carried out at AENOR's registered office: Génova 6, 28004, Madrid – Spain. 

The contract for the purchase of products through this Website shall be governed by Spanish law. Any dispute arising out of or in connection with the use of the Website or such contract shall be subject to the exclusive jurisdiction of the Courts and Tribunals of Madrid.

Notwithstanding the foregoing, if you are entering into this contract as a consumer under the terms of Royal Decree 1/2007, nothing in this clause shall affect the rights that may be granted to you as such under applicable law.