Standards Finder

Standards

UNE-ISO/IEC 27001 and UNE-EN ISO/IEC 27002

The best tools for information security management.

621747 Available results

Filter

(338370)
(278411)
(4966)
UNE

UNE-EN 61140:2017

In Force
2017-05-03
Protección contra los choques eléctricos. Aspectos comunes a las instalaciones y a los equipos.
UNE

UNE-EN ISO 17100:2015/A1:2017

In Force
2017-12-05
Servicios de traducción. Requisitos para los servicios de traducción. Modificación 1. (ISO 17100:2015/Amd 1:2017).
UNE

UNE 23727:1990

In Force
1990-11-13
Ensayos de reacción al fuego de los materiales de construcción. Clasificación de los materiales utilizados en la construcción.
UNE

UNE-EN 14387:2022

In Force
2022-09-07
Equipos de protección respiratoria. Filtros para gases y filtros combinados. Requisitos, ensayos, marcado.
UNE

UNE-EN 4179:2022

In Force
2022-10-19
Serie aeroespacial. Cualificación y aprobación del personal de ensayos no destructivos.
UNE

UNE-EN ISO 15614-11:2002

In Force
2002-10-22
Especificación y cualificación de los procedimientos de soldeo para los materiales metálicos. Ensayo de procedimiento de soldeo. Parte 11: Soldeo por láser y haz de electrones. (ISO 15614-11:2002)
UNE

UNE-CLC/TR 60079-32-1:2018

In Force
2019-03-01
Atmósferas explosivas. Parte 32-1: Peligros electrostáticos. Guía (Ratificada por la Asociación Española de Normalización en marzo de 2019.)
UNE

UNE 22381:1993

In Force
1993-04-12
Control de vibraciones producidas por voladuras.
UNE

UNE-EN 14175-4:2005

In Force
2005-03-30
Vitrinas de gases. Parte 4: Métodos de ensayo in situ.
UNE

UNE-EN 15227:2021+A1:2025

In Force
2025-05-28
Aplicaciones ferroviarias. Requisitos de resistencia a la colisión para cajas de vehículos ferroviarios.
UNE

UNE-EN 12600:2003 ERRATUM:2011

In Force
2011-06-29
Vidrio para la edificación. Ensayo pendular. Método de ensayo al impacto y clasificación para vidrio plano.
UNE

UNE-EN ISO 20976-1:2020

In Force
2020-07-29
Microbiología de la cadena alimentaria. Directrices y requisitos para la realización de ensayos de desafío de productos alimenticios y piensos. Parte 1: Ensayos de desafío para estudiar el potencial de crecimiento, el tiempo de latencia y la tasa máxima de crecimiento. (ISO 20976-1:2019).
UNE

UNE-EN 124-1:2015

In Force
2015-12-29
Dispositivos de cubrimiento y de cierre para zonas de circulación utilizadas por peatones y vehículos. Parte 1: Definiciones, clasificación, principios generales de diseño, requisitos de comportamiento y métodos de ensayo.
UNE

UNE-EN 54-1:2022

In Force
2022-02-23
Sistemas de detección y alarma de incendio. Parte 1: Introducción.
UNE

UNE-EN 361:2002

In Force
2002-11-27
Equipos de protección individual contra caídas de altura. Arneses anticaídas.
UNE

UNE-EN 54-20:2007/AC:2009

In Force
2009-05-27
Sistemas de detección y alarma de incendios. Parte 20: Detectores de aspiración de humos
UNE

UNE-EN ISO 11357-2:2021

In Force
2021-01-27
Plásticos. Calorimetría diferencial de barrido (DSC). Parte 2: Determinación de la temperatura de transición vítrea y de la altura del escalón de transición vítrea. (ISO 11357-2:2020).
UNE

UNE-EN ISO 13849-1:2016

In Force
2016-09-21
Seguridad de las máquinas. Partes de los sistemas de mando relativas a la seguridad. Parte 1: Principios generales para el diseño. (ISO 13849-1:2015)
UNE

UNE-EN IEC 81355-1:2025

In Force
2025-03-01
Sistemas, instalaciones y equipos industriales y productos industriales. Clasificación y designación de la información. Parte 1: Reglas básicas y clasificación de la información. (Ratificada por la Asociación Española de Normalización en marzo de 2025.)
UNE

UNE-EN ISO 10272-2:2018/A1:2024

In Force
2024-01-24
Microbiología de la cadena alimentaria. Método horizontal para la detección y enumeración de Campylobacter spp. Parte 2: Técnica de recuento de colonias. Modificación 1: Incorporación de métodos para la confirmación e identificación molecular de Campylobacter spp. termotolerante, y modificación de los ensayos de rendimiento de los medios de cultivo. (ISO 10272-2:2017/Amd 1:2023).
UNE

UNE-EN IEC 61010-2-030:2021

In Force
2021-05-01
Requisitos de seguridad de equipos eléctricos de medida, control y uso en laboratorio. Parte 2-030: Requisitos particulares para equipos con circuitos de ensayo y de medida. (Ratificada por la Asociación Española de Normalización en mayo de 2021.)
UNE

UNE-EN IEC 61238-1-1:2020

In Force
2020-05-20
Conectores de compresión y de apriete mecánico para cables de energía. Parte 1-1: Métodos de ensayo y requisitos para conectores de compresión y de apriete mecánico para cables de energía de tensiones asignadas hasta 1 kV (Um = 1,2 kV) ensayados en conductores no aislados.
UNE

UNE-EN ISO 10218-1:2012

In Force
2012-05-09
Robots y dispositivos robóticos. Requisitos de seguridad para robots industriales. Parte 1: Robots. (ISO 10218-1:2011)
UNE

UNE-EN 13383-1/AC:2004

In Force
2004-10-22
Escolleras. Parte 1: Especificaciones.
UNE

UNE 59300:2024

In Force
2024-06-19
Calzado. Seguridad en el calzado de bebé e infantil. Propiedades físicas y mecánicas. Especificaciones y métodos de ensayo.
UNE

UNE-EN ISO 4892-2:2014/A1:2022

In Force
2022-10-11
Plásticos. Métodos de exposición a fuentes luminosas de laboratorio. Parte 2: Lámparas de arco de xenón. Modificación 1: Clasificación de filtros de luz natural. (ISO 4892-2:2013/Amd 1:2021).
UNE

UNE-EN ISO 20387:2020

In Force
2020-12-23
Biotecnología. Biobancos. Requisitos generales para los biobancos. (ISO 20387:2018).
UNE

UNE-EN ISO 4414:2011

In Force
2011-12-14
Transmisiones neumáticas. Reglas generales y requisitos de seguridad para los sistemas y sus componentes. (ISO 4414:2010).
UNE

UNE-EN ISO 29469:2023

In Force
2023-09-27
Productos aislantes térmicos para aplicaciones en la edificación. Determinación del comportamiento a compresión. (ISO 29469:2022).
UNE

UNE-EN ISO 4892-3:2025

In Force
2025-04-23
Plásticos. Métodos de exposición a fuentes luminosas de laboratorio. Parte 3: Lámparas UV fluorescentes. (ISO 4892-3:2024).
UNE

UNE-EN ISO 23625:2025

In Force
2025-04-01
Embarcaciones pequeñas. Baterías de iones de litio (ISO 23625:2025) (Ratificada por la Asociación Española de Normalización en abril de 2025.)
UNE

UNE-EN ISO 23278:2015

In Force
2015-07-15
Ensayo no destructivo de uniones soldadas. Ensayo de uniones soldadas mediante partículas magnéticas. Niveles de aceptación. (ISO 23278:2015).
UNE

UNE-EN 60825-1:2015/A11:2021/AC:2022-03

In Force
2022-04-27
Seguridad de los productos láser. Parte 1: Clasificación de los equipos y requisitos.
UNE

UNE-EN 60825-1:2015

In Force
2015-04-01
Seguridad de los productos láser. Parte 1: Clasificación de los equipos y requisitos.
UNE

UNE-EN IEC 60567:2025

In Force
2025-04-02
Equipos eléctricos sumergidos en aceite. Toma de muestras de gases libres y análisis de gases libres y disueltos en aceites minerales y otros líquidos aislantes. Líneas directrices.
UNE

UNE-EN 60079-2:2015

In Force
2015-09-30
Atmósferas explosivas. Parte 2: Equipos de protección por envolventes presurizadas "p".
UNE

UNE-EN 71-2:2021

In Force
2021-07-21
Seguridad de los juguetes. Parte 2: Inflamabilidad.
UNE

UNE-EN 10164:2019

In Force
2019-04-17
Aceros de construcción con resistencia mejorada a la deformación en la dirección perpendicular a la superficie del producto. Condiciones técnicas de suministro.
UNE

UNE-EN 12208:2000

In Force
2000-04-17
Ventanas y puertas. Estanquidad al agua. Clasificación.
UNE

UNE-EN ISO 683-1:2019

In Force
2019-01-23
Aceros para tratamiento térmico, aceros aleados y aceros de fácil mecanización. Parte 1: Aceros no aleados para temple y revenido. (ISO 683-1:2016).
Frequently Asked Questions Do you have any questions about our products?
  • Standards UNE, EN, ISO, IEC, BSI, DIN, ASTM, AFNOR, IEEE, SAE
  • In addition, you can request the rules of the rest of the organizations through the e-mail normas@aenor.com
  • Technical books on paper and in electronic format (PDF, epub).

The standards can be purchased in PDF, reading or paper. The reading standards are not download files, they can only be viewed in the client area. The standards ordered on paper and some of the books in the catalogue are printed on demand. 

Check deadlines in normas@aenor.com.

The license of use is for one user and one device, if you want to reproduce the content of the standard, you must request a license that will have an additional cost. Send us your inquiry here 

The AENOR standards and books that appear in the online store can only be purchased exclusively through the website. AENOR does not have a physical store.

Purchase procedure: by clicking on "Buy" the desired products will go to the shopping cart. If there are display problems, the recommended browser is Chrome.

To formalize the purchase you must access the customer area. If you are not registered as a customer, you must fill in a form with the data along with a password and username. This will create the account.

Once the "Customer data" form has been completed, "Order in progress" will be displayed with all the items loaded in the shopping cart, their prices, taxes established in current legislation and shipping costs if applicable.

The prices of the standards and books that appear in the various sections do not include taxes or shipping costs.

AENOR promotional codes consist of alphanumeric characters and can only be applied to online purchases, received through a specific offer and for a limited time. To apply your promotional code, you just have to enter it in step 2 of 4 of the purchase process on the website and click on "apply", after you have identified yourself and chosen the payment methods. Promo codes are not cumulative.

 

  • Credit or debit card (Visa, Mastercard) and PayPal.
  • Bank transfer. If you opt for this form of payment, you must first send AENOR a copy of the transfer by email to normas@aenor.com
  • The purchase invoice can be downloaded from the customer area, in my previous orders

In the case of clients of companies based abroad, the taxpayer identification number of the corresponding country (for example, in Argentina the CUIT), must be filled in the CIF/NIF - VAT field .

  • Direct download via the website in the Customer Area. In the customer area, which can only be accessed with a password and username, the products purchased will be available for a period of fifteen days from the date of purchase, as long as the payment has been accepted. Files in digital format are protected and in no case editable. Before purchasing them, it is important that the license of use is read and accepted as a prior step to purchase.
  • Shipping by courier. Products purchased on physical media are shipped by courier. The maximum delivery time in Spanish territory, from the acceptance of the order by AENOR, is:
  •  Approximately seven working days for all standards purchased through the store in paper format.
  • Approximately three days for books purchased through the store. Stocks of paper books are limited and their offer on the website does not imply availability within the indicated period. In the event that the requested book is not available, the customer is notified of the delay in receiving the order, which will be approximately seven working days. 

For the rest of the products that are not on the website, check availability and delivery time at normas@aenor.com.

1. For digital products (PDF, Epub), once delivery has been made by direct download via the website in the Customer Area, you will not have the right to exercise your right of withdrawal.

2. For personalised products on paper, once the purchase has been made, you will not have the right to exercise your right of withdrawal.

3.  For all other paper products, you have the right to withdraw from the sale within 14 calendar days from the date of purchase. Remember that for the return it is essential that the product is in perfect condition, sealed by the packaging and preserving its original packaging. The customer will be responsible for pickup and shipping costs.

The order invoice includes shipping costs, so there is no amount to pay to the courier. Shipping costs are calculated based on both the final destination of the order and the number of products ordered. They include transport and packaging costs. Shipping costs are subject to periodic revisions. Outlet books will have free shipping costs only if the shipment is made in the Peninsula.

Destination Up to three standards and/or publications From three standards and/or publications
Peninsula 7,31€ 8,60€
Balearic Islands 18,04€ 23,34€
Canary Islands, Ceuta and Melilla  18,04€ 23,34€
Europe 59,17€ 80,07€
United States and Canada 70,07€ 96,94€
Rest of the world 91,94€ 115,91€
  • Purchases made by residents of the Member States of the European Union will be subject to the payment of VAT (value added tax).
  • ​​
  • In the case of legal persons and natural persons who, acting as entrepreneurs, are domiciled in a Member State of the European Union (except residents in Spain) and have an intra-community NIF/VAT registered in the VIES census, they will be exempt from paying VAT, being an essential condition the sending of this document by email to normas@aenor.com.
  • Purchases made in a private capacity (natural person), regardless of where they have their residence, will be subject to the payment of VAT.
  • Purchases made by entities in non-EU countries will be exempt from paying VAT, as long as they send the corresponding tax residence document by email to normas@aenor.com.
  • The sale operations will be understood to have been carried out at AENOR's registered office: Génova 6, 28004, Madrid – Spain. 

The contract for the purchase of products through this Website shall be governed by Spanish law. Any dispute arising out of or in connection with the use of the Website or such contract shall be subject to the exclusive jurisdiction of the Courts and Tribunals of Madrid.

Notwithstanding the foregoing, if you are entering into this contract as a consumer under the terms of Royal Decree 1/2007, nothing in this clause shall affect the rights that may be granted to you as such under applicable law.