Normas SAE
Filtrar:
SAE
SAE AMS4359A
In Force
2024-04-25
Aluminum Alloy, Extruded Profiles (2395-T84), 3.95Cu - 1.15Li - 0.3Ag -
0.5Mg - 0.1Zr, Solution Heat Treated, Stress Relieved by Stretching, and
Aged
SAE
SAE AS85049/2C
In Force
2025-05-01
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE
SEALING, STRAIGHT, CATEGORY 1C (FOR AS50151 SOLDER TYPE, V THREAD OF
AS310XX CLASSES A, B, C, OR K CONNECTORS, AS95234 CONNECTORS)
SAE
SAE
SAE AMS3304J
In Force
2019-04-05
Elastomer: Silicone, Rubber (MQ/VMQ) General Purpose 65 – 75 Durometer
Type ‘A’ Hardness
SAE
SAE
SAE
SAE
SAE AMS3856/1A
In Force
1993-01-01
CLOTH, UPHOLSTERY, FLAME RESISTANT Novoloid/Aramid, Waffle Type Weave
SAE
SAE
SAE
SAE
SAE
SAE AMS4023D
In Force
1968-11-01
ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 1.0Mg - 0.60Si - 0.30Cu - 0.25Cr
(Alclad 6061; -T6 Sheet, -T651 Plate)
SAE
SAE AS85049/44A
In Force
2011-11-04
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, CATEGORY 4C
(FOR MIL-C-83733 CONNECTORS)
SAE
SAE
SAE AMS3667B
In Force
2011-08-09
POLYTETRAFLUOROETHYLENE SHEET, MOLDED General Purpose Grade, As Sintered
SAE
SAE
SAE AMS4046F
In Force
2012-03-29
Aluminum Alloy Sheet and Plate, Alclad One Side 5.6Zn - 2.5Mg - 1.6Cu -
0.23Cr (Alclad One Side 7075; -T6 Sheet -T651 Plate) Solution and
Precipitation Heat Treated
SAE
SAE
SAE AS50000-2
In Force
1993-11-01
AS50000-099 Bolt, Hexagon Head P.D. Shank .3125-24 UNJF-3A. BS 4084
SAE
SAE
SAE
SAE AMS3797/7C
In Force
2015-04-14
Webbing, Nylon, Integral Locking Slots 1-1/16 (27) Wide, 7000 (31,138)
Breaking Strength
SAE
SAE
SAE
SAE AMS3731/4B
In Force
1993-01-01
POTTING COMPOUND, EPOXY Bisphenol A-Type Impregnating Resin, Heat Cure,
Single Component
SAE
SAE AS85049/9A
In Force
2008-10-30
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE
SEALING, 90°, CATEGORY 1A (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES
2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
SAE
SAE AS83519/1C
In Force
2025-02-25
SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE,
ENVIRONMENT RESISTANT FOR CABLES HAVING TIN OR SILVER PLATED SHIELDS
(CLASS I)
SAE
SAE AMS4342A
In Force
1986-07-01
ALUMINUM ALLOY EXTRUSIONS 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74511)
(Formerly -T736511) Solution Heat Treated, Stress Relieved, and Overaged
SAE
SAE AIR1751A
In Force
2012-08-16
Prediction Method for Lateral Attenuation of Airplane Noise During
Takeoff and Landing
SAE
SAE
SAE AMS4022C
In Force
1964-06-01
ALUMINUM ALLOY SHEET AND PLATE ALCLAD 1Mg - 0.6Si - 0.25Cu - 0.25Cr
(Alclad 6061-T4)
SAE
SAE
SAE AMS2806D
In Force
2018-12-20
Identification Bars, Wire, Mechanical Tubing, and Extrusions, Carbon and
Alloy Steels and Corrosion and Heat-Resistant Steels and Alloys
SAE
SAE AMS3678B
In Force
2006-06-20
Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled,
Pigmented, and Filled Components
SAE
SAE
SAE AMS2372E
In Force
2007-06-13
Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel
Forgings
SAE
SAE AS5681B
In Force
2016-05-17
Minimum Operational Performance Specification for Remote On-Ground Ice
Detection Systems
SAE
SAE AS85049/27B
In Force
2019-11-14
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL,
STRAIGHT, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 3B (FOR
MIL-DTL-38999 SERIES I AND II CONNECTORS)
SAE
SAE AGS3922-4
In Force
2008-10-29
AGS3922 Rivet, Blind, Snap Head, Self-Plugging, Interference Lock
Corrosion Resisting Steel, Cadmium Coated (Cherry Aerospace)
SAE
SAE AMS3579E
In Force
2017-02-06
Plastic Tubing, Electrical Insulation Non-Crosslinked Polyvinyl
Chloride, Flexible, Heat Shrinkable 1.6 to 1 Shrink Ratio
SAE
SAE
SAE AMS3829A
In Force
1988-01-01
CLOTH, TYPE "E"-GLASS, STYLE 7781 FABRIC
Solution-Addition-Type PMR-15 Polyimide Resin Impregnated
SAE
SAE
SAE
SAE
SAE
SAE AMS3274G
In Force
2005-05-31
Acrylonitrile Butadiene (NBR) Rubber Sheet and Molded Shapes Nylon Cloth
Reinforced Fuel Resistant
SAE
SAE AIR1189A
In Force
2006-05-22
Airborne Internal Interface Standards for Moderate Bit Rate Digital Time
Division-Multiplex Systems
SAE
SAE AMS3839D
In Force
1991-10-01
FABRIC, WIRE-REINFORCED ASBESTOS Polytetrafluoroethylene Impregnated,
Sintered
SAE
SAE AMS3683A
In Force
2012-01-27
Tubing, Irradiated Modified Fluoropolymer Plastic, Electrical Insulation
Flame Resistant, Flexible, Heat-Shrinkable, 2 to 1 Shrink Ratio
SAE
SAE AS9679C
In Force
2021-03-23
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CUP
WASHER LOCKED, CRES, UNS S66286, 130 KSI MIN, .3750-24 UNJF-3A
SAE
SAE
SAE AMS4039
In Force
1960-06-01
ALUMINUM ALLOY PLATE, ALCLAD 5.6Zn - 2.5Mg - 1.6Cu - 0.3Cr (Alclad
7075-T651) Stress-Relief Stretched
SAE
SAE
SAE AMS3046E
In Force
2002-02-28
Magnetic Particles, Fluorescent Wet Method, Oil Vehicle, Aerosol
Packaged
SAE
SAE AMS4102G
In Force
2001-11-15
Aluminum Alloy, Bars, Rods, and Wire, Rolled Or Cold-Finished 99.0a1, as
Fabricated
SAE
SAE AIR1425A
In Force
2009-11-22
Methods of Achieving Electromagnetic Compatibility of Gas Turbine Engine
Accessories, for Self-Propelled Vehicles
SAE
SAE AS95
In Force
2013-01-09
FITTING ASSEMBLY, CROSS, REDUCER AND NONREDUCER, INTERNAL FLARE ON ONE
END, TO FLARED TUBE
SAE
