Normas SAE
Filtrar:
SAE
SAE AS1969A
In Force
2025-01-21
Coupling Assembly, Self-Sealing, Quick Disconnect Fuel and Oil System Components
SAE
SAE
SAE AMS4029J
In Force
2000-02-01
Aluminum Alloy Sheet and Plate (2014; -T6 Sheet, -T651 Plate) Solution
and Precipitation Heat Treated
SAE
SAE
SAE
SAE ARP5764
In Force
2018-07-24
Aerospace Active Inceptor Systems for Aircraft Flight and Engine Controls
SAE
SAE
SAE AS22759/6
In Force
2007-11-13
WIRE, ELECTRICAL, FLUOROCARBON-INSULATED, ABRASION RESISTANT EXTRUDED
PTFE, NICKEL-COATED COPPER CONDUCTOR, 600 VOLT
SAE
SAE AMS7261/2B
In Force
1987-10-01
RINGS, SEALING, PHOSPHONITRILIC FLUOROELASTOMER High-Temperature-Fluid
Resistant 75 - 85 FZ Type
SAE
SAE
SAE AMS7280D
In Force
1987-10-01
RINGS, SEALING, FLUOROCARBON RUBBER High Temperature Fluid Resistant,
Low Compression Set FKM Type 70 - 80
SAE
SAE AMS6901A
In Force
2011-06-23
Titanium Alloy Bars, Forgings and Forging Stock 5Al - 2.5Sn, Extra Low
Interstitial Annealed
SAE
SAE
SAE
SAE AMSR6855B
In Force
2010-12-14
Elastomer, Synthetic, Sheets, Strips, Molded or Extruded Shapes, General
Specification for
SAE
SAE AMS6530H
In Force
1988-10-01
STEEL TUBING, SEAMLESS 0.50Ni - 0.55Cr - 0.20Mo (0.28 - 0.33C) (SAE 8630)
SAE
SAE AS1478C
In Force
2024-08-23
HOSE ASSEMBLY, FLEXIBLE, LOW PRESSURE, FLARELESS, POTABLE WATER, 90° TO 90°
SAE
SAE AMS6523G
In Force
2011-11-22
Steel, Sheet, Strip, and Plate 0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V
(0.17 - 0.23C) Vacuum Consumable Electrode Melted, Annealed
SAE
SAE AS22759/87E
In Force
2022-03-15
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, NORMAL
WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 °C, 600 VOLT, ROHS
SAE
SAE AMS7510/2B
In Force
2012-02-09
Magnets, Rare-Earth/Cobalt, Permanent Samarium-Cobalt, 33/67 - 18 (143) 250
SAE
SAE
SAE AS39029/10A_A1
In Force
2008-10-23
Contacts, Electrical Connector, Socket, Crimp Removable, Thermocouple
(For MIL-DTL-26482 Series 2, AS81703 Series 3, MIL-DTL-83723 Series I
and III, and MIL-DTL-83733 Connectors)
SAE
SAE AMS5595B
In Force
1978-01-01
STEEL SHEET, STRIP, AND PLATE, CORROSION RESISTANT 9.0Mn - 20Cr - 6.5Ni
- 0.27N
SAE
SAE AMS5759A
In Force
1960-01-01
Cobalt Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings,
52Co - 20Cr - 10Ni - 15W
SAE
SAE
SAE AMS6454B
In Force
1995-05-01
STEEL SHEET, STRIP, AND PLATE 1.8Ni - 0.80Cr - 0.25Mo (0.38 - 0.43C)
(SAE 4340) Consumable Electrode Melted
SAE
SAE AMS6519C
In Force
2010-05-17
Steel, Maraging, Bars, Forgings, Tubing, and Rings 19Ni - 3.0Mo - 1.4Ti
- 0.10Al Premium Aircraft-Quality Double Vacuum Melted, Annealed
SAE
SAE AMS5653B
In Force
1982-10-01
STEEL BARS, FORGINGS, TUBING, AND RINGS, CORROSION AND HEAT RESISTANT
17Cr - 12Ni - 2.5Mo (SAE 30316L) Solution Heat Treated
SAE
SAE
SAE AS3235B
In Force
2007-06-27
BOLT, TEE HEAD - CRES, UNS N07001, 165 KSI MIN, CHAMFERED, .3750-24 UNJF-3A
SAE
SAE AMS6350G
In Force
1986-04-01
STEEL SHEET, STRIP, AND PLATE 0.95Cr - 0.20Mo (0.28 - 0.33 C) (SAE 4130)
SAE
SAE
SAE
SAE ARP5453
In Force
2006-08-14
Training Pilots Prior to Simultaneous Instrument Landing System (ILS)
Precision Runway Monitor (PRM) Approaches to Closely-Spaced Parallel Runways
SAE
SAE AS3157B
In Force
2020-12-29
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE
TOLERANCE SHANK, AMS4967, .250-28 UNJF-3A
SAE
SAE
SAE AMS4115E
In Force
1989-04-01
ALUMINUM ALLOY BARS, RODS, AND WIRE, ROLLED or COLD-FINISHED, AND RINGS
1.0Mg - 0.60Si - 0.28CU - 0.20Cr (6061-0) Annealed
SAE
SAE AMS4090B
In Force
2011-08-09
ALUMINUM ALLOY PLATE 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T651) Solution
Heat Treated, Stress Relieved, and Precipitation Heat Treated
SAE
SAE
SAE AS29600/24A
In Force
2020-03-09
CONTACTS, PIN, CRIMP REMOVABLE ,CONNECTORS, ELECTRICAL, CIRCULAR,
MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT
RESISTANT, (SERIES B)
SAE
SAE AMS5646D
In Force
1955-03-01
STEEL, CORROSION AND HEAT RESISTANT 18Cr - 11Ni - (Cb+Ta) (SAE 30347)
SAE
SAE
SAE
SAE AMS6900B
In Force
2015-07-27
Titanium Alloy Bars, Forgings and Forging Stock 5Al - 2.5Sn Annealed
SAE
SAE AMS7819B
In Force
1994-04-01
MOLYBDENUM ALLOY BARS 0.48Ti - 0.09Zr - 0.02C Arc Cast, Stress Relieved
SAE
SAE AS31371B
In Force
2019-11-15
CONNECTOR, PLUG, ELECTRIC, SOLDER TYPE, PUSH-PULL COUPLING SERIES 1
(CLASS E, P, AND J)
SAE
SAE AS39029/79A
In Force
2020-01-07
CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR
MIL-DTL-28748/9 CONNECTORS)
SAE
SAE
SAE AS22520/45A
In Force
2021-12-27
CRIMPING TOOLS, TYPE I, HAND, WIRE, TERMINATION FOR WIRE BARREL SIZE 10
POWER CONTACTS
SAE
SAE
SAE
SAE AS1520
In Force
2002-07-23
AREAS FOR CALCULATING STRESS OR LOAD VALUES FOR METRIC MJ EXTERNALLY
THREADED FASTENERS
SAE
SAE
SAE AMS6350R
In Force
2024-12-18
Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)
Aircraft Quality
SAE
SAE AMS7471B
In Force
1970-11-01
BOLTS AND SCREWS, NICKEL ALLOY, CORROSION AND HEAT RESISTANT Upset
Headed, Heat Treated, Roll Thread 1950 F (1065.6 C) Solution Heat Treatment
SAE
SAE AMS5684E
In Force
1996-08-01
Alloy Welding, Electrodes, Covered, Corrosion and Heat Resistant 72ni
15cr 9fe 2.8(Cb + Ta)
SAE
SAE AMS6294J
In Force
2014-07-31
Steel Bars and Forgings, Carburizing 1.8Ni - 0.25Mo (0.17 - 0.22C) (SAE 4620)
SAE
SAE
SAE
