AENOR Logo

Normas SAE

49877 Available results

Filtrar:

(40986)
(8891)
SAE

SAE AMS2252B
In Force
1978-07-01
TOLERANCES Low-Alloy Steel Sheet, Strip, and Plate
SAE

SAE AMS3212E
In Force
1951-10-01
SYNTHETIC RUBBER Aromatic Fuel Resistant (55-65)
SAE

SAE AMS2407E
In Force
2005-05-31
PLATING, CHROMIUM, POROUS
SAE

SAE AMS5343F
In Force
2019-11-05
Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength (17-4)
SAE

SAE AMS4326
In Force
2017-11-14
Aluminum Alloy, 2013, Extruded Bar, Rod, and Profiles 1.0 Mg - 0.80 Si - 1.8 Cu - 0.20 Cr (2013 - T6511) Solution Heat Treated, Stress-Relieved by Stretching, and Aged
SAE

SAE AMS4221B
In Force
2005-08-31
Aluminum Alloy, Plate 4.4Cu - 1.5Mg - 0.60Mn (2124-T8151) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
SAE

SAE AMS4237B
In Force
2007-04-13
Aluminum Alloy, Castings, Sand, 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (206.0-T71), Solution Heat Treated and Naturally Aged
SAE

SAE AMS4260C
In Force
1992-04-01
ALUMINUM ALLOY CASTINGS, INVESTMENT 7.0Si - 0.32Mg (356.0-T6) Solution and Precipitation Heat Treated
SAE

SAE AMS5044J
In Force
2013-10-02
Steel, Sheet and Strip 0.15 Carbon, Maximum Half Hard Temper
SAE

SAE AMS4013D
In Force
1995-05-01
ALUMINUM SHEET, LAMINATED Surface Bonded
SAE

SAE AMS4326B
In Force
2023-12-14
Aluminum Alloy, 2013, Extruded Bar, Rod, and Profiles, 1.0Mg - 0.80Si - 1.8Cu - 0.20Cr (2013 -T6511), Solution Heat Treated, Stress-Relieved by Stretching, and Aged
SAE

SAE AMS4323E
In Force
2025-04-14
Aluminum Alloy, Hand Forgings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7452), Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
SAE

SAE AMS5027D
In Force
1996-11-01
STEEL, WELDING WIRE 1.05Cr - 0.55Ni - 1.0Mo - 0.08V (0.26 - 0.32C) Vacuum Melted, Environment-Controlled Packaging
SAE

SAE AMS4453B
In Force
1992-04-01
MAGNESIUM ALLOY CASTINGS, INVESTMENT 9.0A1 - 2.0Zn (AZ92A-T6) Solution and Precipitation Heat Treated
SAE

SAE AMS4083E
In Force
1967-11-01
ALUMINUM ALLOY TUBING, HYDRAULIC, SEAMLESS, DRAWN, ROUND 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T6)
SAE

SAE AMS4220E
In Force
1995-11-01
Aluminum Alloy, Castings, Sand, 4cu 2ni 1.5mg 0.2cr, Solution Treated and Overaged
SAE

SAE AMS4918G
In Force
1995-05-01
TITANIUM ALLOY SHEET, STRIP, AND PLATE 6Al - 6V - 2Sn Annealed
SAE

SAE AMS4284D
In Force
1959-01-15
ALUMINUM ALLOY CASTINGS, PERMANENT MOLD 7Si - 0.3Mg (356-T6)
SAE

SAE AMS4219D
In Force
2001-10-01
Aluminum Alloy Castings 7.0Si - 0.55Mg - 0.12Ti - 0.06Be (A357.0 T61P) Solution and Precipitation Heat Treated
SAE

SAE AMS5506C
In Force
1978-01-01
STEEL SHEET, STRIP, AND PLATE, CORROSION AND MODERATE HEAT RESISTANT 13Cr (0.30 - 0.40C) (SAE 51420)
SAE

SAE AMS4322A
In Force
2005-07-25
Aluminum Alloy, Die Forgings 4.0Mg 1.3Li 1.2C 0.45 Oâ‚‚ Mechanically Alloyed, As-Fabricated
SAE

SAE AMS4362G
In Force
2014-02-26
Forgings, Magnesium Alloy 5.5Zn - 0.45Zr (ZK60A-T5) Precipitation Heat Treated
SAE

SAE AMS4198A
In Force
1992-01-01
Aluminum Alloy, Sheet Plate Alclad 4.3zn-3.3mg-0.6cu-0.20mn-0.17c (7011 Alclad 7079-O)
SAE

SAE AMS4286A
In Force
1958-08-15
ALUMINUM ALLOY CASTINGS, PERMANENT MOLD 7Si - 0.3Mg (356-T51)
SAE

SAE AMS3904B
In Force
1999-03-01
Organic Fiber (Para-Aramid), Yarn and Roving Intermediate Modulus For Cables, Cordage, and Woven Goods
SAE

SAE AMS4970F
In Force
1994-04-01
TITANIUM ALLOY BARS, WIRE, AND FORGINGS 7Al - 4Mo Solution and Precipitation Heat Treated
SAE

SAE AMS5377D
In Force
1995-04-01
NICKEL ALLOY, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS 73Ni - 12Cr - 4.5Mo - 2.0Cb - 0.70Ti - 0.05C - 6.0Al - 0.010B - 0.10Zr Vacuum Cast, As Cast
SAE

SAE AMS4590A
In Force
1994-04-01
EXTRUSIONS, NICKEL-ALUMINUM BRONZE, MARTENSITIC 78.5Cu - 10.5Al - 5.1Ni - 4.8Fe Solution Heat Treated and Tempered (TQ50)
SAE

SAE AMS4625H
In Force
2016-09-20
Phosphor Bronze Bars, Rods, and Tubing 95Cu - 5Sn Hard Temper
SAE

SAE AMS4420A
In Force
1941-11-01
CAST MAGNESIUM ALLOY As Cast
SAE

SAE AMS3904C
In Force
2016-08-01
Organic Fiber (Para-Aramid), Yarn and Roving Intermediate Modulus For Cables, Cordage, and Woven Goods
SAE

SAE AMS4310F
In Force
2020-12-22
Aluminum Alloy, Rolled or Forged Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T651, 7075-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
SAE

SAE AMS4226A
In Force
2012-09-27
Aluminum Alloy Castings, High Strength 5.0Cu - 0.35Mn - 0.18Zr - 0.10V (224.0) Solution and Precipitation Heat Treated (Overaged)
SAE

SAE AMS4803B
In Force
1980-01-15
ZINC ALLOY CASTINGS, DIE 4.0Al - 0.04Mg
SAE

SAE AMS3807B
In Force
2006-01-06
Tape, Aluminum Foil, Sound and Vibration Damping Pressure Sensitive Adhesive
SAE

SAE AMS3410K
In Force
2021-08-06
Flux, Silver Brazing
SAE

SAE AMS5344H
In Force
2026-01-19
Steel, Corrosion-Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb - 3.2Cu, Homogenization, Solution, and Precipitation Heat Treated (H900), 180 ksi (1241 MPa) Tensile Strength (17-4)
SAE

SAE AMS3634A
In Force
1975-06-01
PLASTIC TUBING, ELECTRICAL INSULATION Polyolefin, Selectively Crosslinked, Encapsulating, Semi-Rigid, Heat-Shrinkable
SAE

SAE AMS3666C
In Force
1991-10-01
POLYTETRAFLUOROETHYLENE (PTFE) SHEET, GLASS CLOTH REINFORCED
SAE

SAE AMS2817F
In Force
2008-12-30
Packaging and Identification Preformed Packings
SAE

SAE AMS3132D
In Force
1976-01-01
VARNISH, PHENOLIC RESIN Corrosion-Preventive
SAE

SAE AMS3667C
In Force
1998-12-01
Polytetrafluoroethylene Sheet, Molded General Purpose Grade, As Sintered
SAE

SAE AMS2605A
In Force
1944-11-01
PRESSURE TESTING 55 psi
SAE

SAE AMS2205K
In Force
1967-11-01
TOLERANCES Aluminum and Magnesium Alloy Extrusions
SAE

SAE AMS3726
In Force
2011-08-25
SHIMS, FILLED RESIN COMPOUND
SAE

SAE AMS3320J
In Force
2019-05-10
Elastomer: Silicone (VMQ) Rubber Sheet, Glass Cloth Reinforced Heat and Weather Resistant 60 to 80 Type “A” Durometer Hardness
SAE

SAE AMS3584A
In Force
1979-07-16
PLASTIC TUBING, ELECTRICAL INSULATION Polytetrafluoroethylene, Heat Shrinkable Overexpanded
SAE

SAE AMS3214D
In Force
1951-03-01
SYNTHETIC RUBBER Aromatic Fuel Resistant (35-45)
SAE

SAE AMS2412D
In Force
1967-04-15
SILVER PLATING Copper Strike, Low Bake
SAE

SAE AMS3157B
In Force
1994-04-01
OIL, FLUORESCENT PENETRANT High Fluorescence, Solvent Soluble
SAE

SAE AMS2480K
In Force
2024-07-23
Zinc Phosphate Treatment Paint Base
SAE

SAE AMS3128F
In Force
2005-05-31
Aluminum Pigment Paste
SAE

SAE AMS4926R
In Force
2024-04-01
Titanium Alloy, Bars, Wire, and Rings 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength
SAE

SAE AMS4188/1
In Force
2002-12-16
ALUMINUM ALLOY WELDING WIRE 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0)
SAE

SAE AMS4469A
In Force
2019-01-04
Aluminum Alloy Tubing, Seamless, Drawn 1.8Cu - 1.0Mg - 0.8Si - 0.20Cr Solution Heat Treated, Stress-Relieved by Stretching, and Aged (2013-T4511)
SAE

SAE AMS4149B
In Force
1987-10-01
ALUMINUM ALLOY FORGINGS 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr [7175-T74 (formerly T736)] Solution and Precipitation Heat Treated
SAE

SAE AMS4422M
In Force
1987-04-01
MAGNESIUM ALLOY CASTINGS, SAND 6.0Al - 3.0Zn (AZ63-T4) Solution Heat Treated
SAE

SAE AMS4444C
In Force
2000-09-01
Magnesium Alloy Castings, Sand 6.0Zn - 0.80Zr (ZK61A-T5) Precipitation Heat Treated
SAE

SAE AMS5040G
In Force
1977-01-01
CARBON STEEL STRIP Deep Forming Grade
SAE

SAE AMS4842F
In Force
2018-09-07
Castings, Leaded Bronze, Sand and Centrifugal 80Cu - 10Sn - 9.5Pb As Cast