AENOR Logo

Normas SAE

49849 Available results

Filtrar:

(40957)
(8892)
SAE

SAE AMS5713F
In Force
1989-07-01
ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum Melted, Solution and Precipitation Heat Treated
SAE

SAE AS4832A
In Force
2019-06-17
Gland Design: Nominal 3/8 Inch Cross Section for Compression-Type Seals
SAE

SAE AMS5706A
In Force
1965-09-01
ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Solution Heat Treated, 1825 - 1900 F (996.1 - 1037.8 C) Treatment Consumable Electrode or Vacuum Induction Melted
SAE

SAE AMS6357E
In Force
1976-01-15
STEEL SHEET, STRIP, AND PLATE 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (SAE 8735)
SAE

SAE AMS6305A
In Force
1985-10-01
STEEL BARS, FORGINGS, AND TUBING, LOW-ALLOY, HEAT-RESISTANT 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C) Vacuum Arc Remelted
SAE

SAE ARP997A
In Force
1981-03-01
PASSENGER CABIN EMERGENCY EQUIPMENT STOWAGE
SAE

SAE AMS5911B
In Force
2014-06-10
Steel, Corrosion-Resistant, Sheet and Strip 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength
SAE

SAE ARP5483/6A
In Force
2018-08-23
Rolling Element Bearing Test Method for Dimensional Stability
SAE

SAE AMS5955B
In Force
2016-06-14
Steel, Corrosion-Resistant, Bars, Wire, and Forgings 10Cr - 12Ni - 2Mo - 1.45Al - 1.15Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable
SAE

SAE AMS6550J
In Force
2001-07-01
Steel Tubing, Welded, 0.50ni 0.55cr 0.20mo (0.28 0.33c) (SAE 8630)
SAE

SAE AS1009C
In Force
1982-10-01
TEE, REDUCER, BULKHEAD ON SIDE, FLARELESS TUBE
SAE

SAE AMS6276H
In Force
2004-10-18
Steel Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Consumable Electrode Vacuum Melted
SAE

SAE AMS7292A
In Force
1998-10-01
Labels, Aluminum Foil-Etched, Anodized, and Dyed
SAE

SAE AMS3895B
In Force
1994-07-01
BROADGOODS AND TAPE, CARBON FIBER-EPOXY RESIN IMPREGNATED Multi-Ply, Uniform Fiber
SAE

SAE ARP953C
In Force
2018-04-19
Stress Dome in Fasteners
SAE

SAE AMS6408C
In Force
2009-03-09
Steel, Hotwork Tool, Bars and Forgings 5.25Cr – 1.5Mo – 1.0V (0.35-0.45C) (H-13) Electroslag Remelted (ESR) or Consumable Electrode Vacuum Arc Remelted (VAR) Annealed
SAE

SAE AMS3901/9B
In Force
1998-09-01
Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/23.9 Tensile Strength, 17.5 (121)/970 Tensile Modulus 380 Denier (420 d tex), 1.2% Finish
SAE

SAE ARP577C
In Force
1993-03-16
EMERGENCY PLACARDING - INTERNAL AND EXTERNAL
SAE

SAE AMS7235A
In Force
1971-05-01
RIVETS, STEEL, CORROSION AND HEAT RESISTANT 15Cr - 26Ni - 1.3Mo - 2.1Ti - 0.30V 1650 F (898.9 C) Solution Heat Treated and Partially Precipitation Heat Treated
SAE

SAE AMS4071K
In Force
1995-09-01
ALUMINUM ALLOY, DRAWN, ROUND, SEAMLESS HYDRAULIC TUBING 2.5Mg - 0.25Cr (5052-0) Annealed
SAE

SAE AS117041
In Force
2005-05-04
SCREW - OVAL FILLISTER DRILLED HEAD, .164-32
SAE

SAE AMS7276E
In Force
1997-10-01
RINGS, SEALING, FLUOROCARBON (FKM) RUBBER High-Temperature-Fluid Resistant Low Compression Set 70 to 80
SAE

SAE AMS4118K
In Force
2006-04-21
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si (2017; -T4, -T451) Solution Heat Treated
SAE

SAE AS1852C
In Force
2006-03-24
Nozzles and Ports - Gravity Fueling Interface Standard for Civil Aircraft
SAE

SAE AMSQQA250/7A
In Force
2007-02-15
Aluminum Alloy 5086, Plate and Sheet
SAE

SAE AS16721
In Force
2018-11-07
INSERT ARRANGEMENTS, AS81582 CONNECTORS, UMBILICAL
SAE

SAE AMSDTL23053/18B
In Force
2018-12-05
Insulation Sleeving, Electrical, Heat Shrinkable, Modified Fluoropolymer, Crosslinked
SAE

SAE AS21004A
In Force
2014-02-13
TERMINAL, LUG, UNINSULATED, RECTANGULAR TONGUE, CRIMP STYLE, COPPER, TYPE I, CLASS 1 FOR 175 °C TOTAL CONDUCTOR TEMPERATURE
SAE

SAE ARP1481A
In Force
2004-08-18
Corrosion Control and Electrical Conductivity in Enclosure Design
SAE

SAE AS18029D
In Force
2019-08-01
COVER ASSEMBLY, ELECTRICAL, FOR MS27212 TERMINAL BOARD ASSEMBLY
SAE

SAE AMSP5516A
In Force
2010-11-30
Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160°F
SAE

SAE AS1814
In Force
1983-07-01
TERMINOLOGY FOR TITANIUM MICROSTRUCTURES
SAE

SAE AMS4129
In Force
1969-11-01
ALUMINUM ALLOY BARS, ROLLED OR COLD FINISHED 1.0Mg – 0.60Si – 0.30Cu – 0.20Cr (6061-T651) Stress-Relief Stretched
SAE

SAE AS18200-3
In Force
1979-01-01
AS18200-299 Bolt, Externally Relieved Body - Double Hexagon Extended Washer Head, Cupwasher Locked, D.T.D. 5066 .187-32 UNS-3A
SAE

SAE AMS4049H
In Force
1992-04-01
ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075; -T6 Sheet - T651 Plate) Solution and Precipitation Heat Treated
SAE

SAE AS1584E
In Force
2013-10-20
FITTING, ELBOW, 90 DEGREE, INTEGRAL WELD RING, 3000 PSI
SAE

SAE AMS4236C
In Force
2013-02-12
Aluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T4) Solution Heat Treated and Naturally Aged
SAE

SAE AS156D
In Force
2001-05-01
HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, 45° TO 45°, FLARED, LIGHTWEIGHT
SAE

SAE AMS5551B
In Force
1991-04-01
Sheet and Strip, Corrosion and Heat Resistant 55ni 19cr 10co 10mo 2.5ti 1.0a1 0.006b Consumable Electrode Or Vacuum Induction Melted, Solution Heat Treated
SAE

SAE AS20708/48B
In Force
2017-03-20
Synchro, Torque Differential Transmitter, Type 23TDX4C
SAE

SAE AMS5562C
In Force
1995-04-01
STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS TUBING 9.0Mn - 20Cr - 6.5Ni - 0.28N Solution Heat Treated
SAE

SAE AS29600/2
In Force
2009-06-29
CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS, BACKSHELL, SHIELD TERMINATING, (SERIES A AND B)
SAE

SAE AMS5599A
In Force
1977-01-01
ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT 62Ni - 21.5Cr - 9.0Mo - 3.7 (Cb+Ta)
SAE

SAE AS2900-2
In Force
2015-12-04
AS2900 Eye End
SAE

SAE AMS5686B
In Force
1971-05-01
STEEL WIRE, CORROSION RESISTANT 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated, Rivet Wire
SAE

SAE AS27350-4
In Force
1988-07-01
AS27350-399 Adaptor, Straight, Pipe (for Inch Pipes)
SAE

SAE AMS5718B
In Force
2000-11-01
Steel, Bars, Forgings, Tubing, and Rings, Corrosion Resistant 11.8Cr - 2.5Ni - 1.8Mo - 0.33V (0.08 - 0.15C) Annealed
SAE

SAE AS28019-2
In Force
1970-11-16
AS28019 Nut, Self-Locking, Non C.R. Steel, Corner Anchor, Miniature, Cadmium Coated
SAE

SAE AMS5592A
In Force
1982-10-01
STEEL SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT 18.5Cr - 35Ni - 1.15Si Solution Heat Treated
SAE

SAE AS2598-5
In Force
1946-11-11
AS2598 Filler Sealing Ring
SAE

SAE AMS5683E
In Force
1994-04-01
ALLOY WELDING WIRE, CORROSION AND HEAT RESISTANT 75Ni - 15.5Cr - 8.0Fe
SAE

SAE AS23500-3
In Force
1988-01-07
AS23500-599 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, BS HR 601, .250-28 UNJF.-3A. MOD. B.S.4084
SAE

SAE AMS5572G
In Force
1996-01-01
STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS TUBING 25Cr - 20Ni (SAE 30310S) Solution Heat Treated
SAE

SAE AS3241D
In Force
2017-10-03
BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .5000-20 UNJF-3A
SAE

SAE AMS5690J
In Force
1988-01-01
STEEL WIRE, CORROSION AND HEAT RESISTANT 17Cr - 12Ni - 2.5Mo (SAE 30316) Solution Heat Treated
SAE

SAE AS24586
In Force
2006-05-03
SPRING, HELICAL, EXTENSION: FOR LOADS BELOW 30 POUNDS
SAE

SAE AMS5804A
In Force
1963-01-01
STEEL WIRE, WELDING, CORROSION AND HEAT RESISTANT 15Cr - 26Ni - 1.3Mo - 2.2Ti - 0.3V
SAE

SAE AS25189C
In Force
2024-03-01
TERMINAL, LUG, CRIMP STYLE, COPPER, UNINSULATED, FLAG TONGUE, SIZES 8-0000, TYPE I, CLASS I, FOR 150 °C TOTAL CONDUCTOR TEMPERATURE
SAE

SAE AMS5805C
In Force
1979-07-01
STEEL WELDING WIRE, CORROSION AND HEAT RESISTANT 15Cr - 25.5Ni - 1.3Mo - 2.2Ti - 0.006B - 0.30V Vacuum Induction Melted
SAE

SAE AS39029/94C
In Force
2023-03-20
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-83527 CONNECTORS)