Normas SAE
Filtrar:
SAE
SAE AMS3584D
In Force
1996-10-01
Plastic Tubing, Electrical Insulation, Polytetrafluoroethylene, Heat
Shrinkable, Overexpanded
SAE
SAE AMS3281E
In Force
2010-12-02
Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel
Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 °F
(182 °C)
SAE
SAE
SAE AMS3678/5A
In Force
2010-11-30
Type 5 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with Pigment
SAE
SAE
SAE
SAE
SAE AMS5047F
In Force
2012-04-09
Steel, Sheet and Strip 0.08 - 0.13C, Aluminum Killed (SAE 1010) Deep
Forming Grade
SAE
SAE AMS4913B
In Force
1981-01-01
Titanium Alloy, Sheet and Strip 4al 3mo 1v Solution and Precipitation Treated
SAE
SAE AMS5558D
In Force
1989-01-01
STEEL TUBING, WELDED, CORROSION AND HEAT RESISTANT 18Cr - 10.5Ni - 0.70
(Cb + Ta) (SAE 30347) Thin Wall Solution Heat Treated
SAE
SAE
SAE
SAE AMS5518F
In Force
1984-07-01
STEEL SHEET AND STRIP, CORROSION RESISTANT 18Cr - 8Ni (SAE 30301) Cold
Rolled, 150,000 psi (1035 MPa) Tensile Strength
SAE
SAE AMS4944M
In Force
2020-01-30
Titanium Alloy Tubing, Seamless, Hydraulic 3.0Al - 2.5V Cold Worked,
Stress Relieved
SAE
SAE AMS3906/2A
In Force
2011-08-09
GLASS NON-WOVEN FIBER TAPE AND FLAT SHEET Epoxy Resin Impregnated, For
Hand and Machine Layup GL-III-36 - 120 (250)
SAE
SAE AMS5647K
In Force
2017-02-01
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and
Rings 19Cr - 9.5Ni Solution Heat Treated
SAE
SAE
SAE
SAE
SAE
SAE AMS2469F
In Force
1998-11-01
Hard Anodic Coating Treatment of Aluminum and Aluminum Alloys Processing
and Performance Requirements
SAE
SAE AMS3100/1
In Force
1994-08-01
ADHESION PROMOTER For Polysulfide Sealing Compounds Non-Halogenated Solvent
SAE
SAE AMS3678/6A
In Force
2010-11-30
Type 6 60% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings
or Extrusions
SAE
SAE AMS2372C
In Force
2001-03-01
QUALITY ASSURANCE SAMPLING AND TESTING Carbon and Low-Alloy Steel Forgings
SAE
SAE AMS2469G
In Force
2004-12-15
Hard Anodic Coating Treatment of Aluminum and Aluminum Alloys Processing
and Performance Requirements
SAE
SAE
SAE
SAE
SAE AMS3583D
In Force
1995-10-01
Plastic Tubing, Electrical Insulation, Crosslinked Polyvinyl Chloride,
Semi-Rigid, Heat Shrinkable, 2 to 1 Shrink Ratio
SAE
SAE
SAE
SAE
SAE AMS4921J
In Force
2004-01-12
Titanium Bars, Wire, Forgings, and Rings Commercially Pure 70 ksi (483
MPa) Yield Strength
SAE
SAE AMS3906/2B
In Force
1997-10-01
Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, For
Hand and Machine Layup GL-III-36 - 120 (248)
SAE
SAE AMS3849C
In Force
2016-12-15
Cloth, Quartz, Style 581 Fabric Hot-Melt, Addition-Type, Polyimide Resin Impregnated
SAE
SAE AMS5675J
In Force
2021-07-19
Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 70Ni - 2.5Mn -
15.5Cr - 3.0Ti - 7.0Fe
SAE
SAE AMS5559D
In Force
1982-07-01
STEEL TUBING, WELDED, CORROSION AND HEAT RESISTANT 18Cr - 10.5Ni -
0.40Ti (SAE 30321) Thin Wall Solution Heat Treated
SAE
SAE
SAE AMS4921H
In Force
2002-04-22
Titanium Bars, Wire, Forgings, and Rings Commercially Pure 70 ksi (483
MPa) Yield Strength
SAE
SAE AMS4076B
In Force
1945-11-01
ALUMINUM ALLOY TUBING (SEAMLESS) Magnesium Silicon Chromium (53S-W)
SAE
SAE AMS5442B
In Force
2022-08-04
Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Rings
Ni - 18Cr - 2.8Mo - 5.5Cb(Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W
Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968
°C) Solution and Precipitation Heat Treated
SAE
SAE AMS4048C
In Force
1958-08-01
ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 5.6Zn - 2.5Mg - 1.6Cu - 0.25Cr
(Alclad 7075-0)
SAE
SAE
SAE AMS5642F
In Force
1972-05-01
STEEL BARS AND FORGINGS, CORROSION AND HEAT RESISTANT 18Cr - 10.5Ni (303
+ Cb) Free-Machining
SAE
SAE
SAE AMS5559A
In Force
1962-06-01
STEEL TUBING, WELDED, CORROSION AND HEAT RESISTANT 18Cr - 10Ni - Ti (SAE
30321) Thin Wall
SAE
SAE AMS4958D
In Force
2013-06-10
Titanium Alloy Bars and Rods 3Al - 8V - 6Cr - 4Mo - 4Zr Consumable
Electrode Melted Solution Heat Treated and Centerless Ground or Peeled
and Polished
SAE
SAE AMS4048N
In Force
2010-08-18
Aluminum Alloy Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr
(Alclad 7075-O) Annealed or when specified, “As Fabricated” (Alclad 7075-F)
SAE
SAE AMS5568F
In Force
2006-04-18
Steel, Corrosion and Heat Resistant, Welded Tubing 17Cr - 7.1Ni - 1.1Al
Solution Heat Treated, Precipitation-Hardenable
SAE
SAE AMS5699C
In Force
1980-07-01
ALLOY WIRE, CORROSION AND HEAT RESISTANT 72Ni - 15.5Cr - 2.5Ti - 0.95
(Cb+Ta) - 0.70Al - 7.0Fe Spring Temper
SAE
SAE AMS5632E
In Force
1983-10-01
STEEL BARS AND FORGINGS, CORROSION RESISTANT 17Cr - 0.50Mo (0.95 -
1.20C) (SAE 51440F) Free-Machining
SAE
SAE AMS5723A
In Force
1984-01-01
Steel Bars, Forgings and Rings, Corrosion and Heat Resistant 20cr 9ni
1.6mo 1.4w 0.6ti
SAE
SAE AMS5678A
In Force
1981-10-01
STEEL WIRE, CORROSION RESISTANT 17Cr - 7.1Ni - 1.1Al
Precipitation-Hardenable, Spring Temper
SAE
SAE AMS4944N
In Force
2025-03-05
Titanium Alloy Tubing, Seamless, Hydraulic, 3.0Al - 2.5V, Cold Worked,
Stress Relieved
SAE
SAE AMS4048D
In Force
1965-02-01
ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 5.6Zn - 2.5Mg - 1.6Cu - 0.25Cr
(Alclad 7075-0)
SAE
SAE AMS5530A
In Force
1949-11-01
ALLOY SHEET, CORROSION AND HEAT RESISTANT Nickel Base - 17Mo - 16.5Cr -
6Fe - 5W
SAE
SAE AMS3867/4B
In Force
2016-10-12
Boron Filament Tape, Epoxy-Resin-Impregnated Type B4.0-E180 (Type B0.102-E82)
SAE
SAE AMS3904/10A
In Force
1999-03-01
Roving, Organic Fiber (Para-Aramid) Intermediate Modulus 15,000 Denier
(16,700 Dtex), 7.0% Finish
SAE
SAE AMS4069G
In Force
2023-09-21
Aluminum Alloy, Drawn, Round Seamless Tubing Close Tolerance 2.5Mg -
0.25Cr (5052-O) Annealed
SAE
SAE AMS6512H
In Force
2017-06-22
Steel, Maraging, Bars, Forgings, Tubing, and Rings 18Ni - 7.8Co - 4.9Mo
- 0.40Ti - 0.10Al Consumable Electrode Vacuum Melted, Annealed
