AENOR Logo

Normas SAE

49877 Available results

Filtrar:

(40986)
(8891)
SAE

SAE AMS4092A
In Force
1966-01-01
Aluminum Alloy, Tubing, Seamless, Drawn (6062 T6)
SAE

SAE AMS4133C
In Force
1994-04-01
ALUMINUM ALLOY FORGINGS AND ROLLED RINGS 4.4CU - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treated
SAE

SAE AMS7445B
In Force
1984-10-01
BALLS, STEEL, CORROSION RESISTANT 17Cr Hardened
SAE

SAE AMS7458C
In Force
1973-05-15
STUDS, STEEL, LOW-ALLOY HEAT RESISTANT Normalized and Tempered, Roll Threaded 135,000 psi (931 MPa) Tensile Strength
SAE

SAE AMS5663L
In Force
2003-07-14
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution and Precipitation Heat Treated
SAE

SAE AMS5664B
In Force
1980-10-01
ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT 52.5Ni - 19Cr - 3.0Mo - 5.1(Cb+Ta) - 0.90Ti - 0.50Al - 19Fe Consumable Electrode or Vacuum Induction Melted 1950° F (1065° C) Solution Treated
SAE

SAE AMS5544G
In Force
1995-05-01
ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted, Annealed
SAE

SAE AMS3901/11A
In Force
1992-10-01
YARN, ORGANIC FIBER (PARA-ARAMID), HIGH MODULUS OY 390 (2689)/22.2 Tensile Strength, 16.5 (114)/870 Tensile Modulus 1420 Denier, 1.2% Finish
SAE

SAE AMS4132B
In Force
1976-01-01
ALUMINUM ALLOY FORGINGS 2.3Cu - 1.6Mg - 1.1Fe - 1.0Ni - 0.18Si - 0.07Ti (2618-T61)
SAE

SAE AMS7712C
In Force
1992-04-01
STEEL SHEET AND STRIP, FLAT-ROLLED, ELECTRICAL, NON-ORIENTED 3.0(Si + Al) Type 47S178 or Type 64S194, Semi-Processed
SAE

SAE AS1712A
In Force
1984-01-01
COUPLING SUB-ASSEMBLY, FLEXIBLE, VARIABLE CAVITY, THREADED, FERRULE TYPE TUBE ENDS
SAE

SAE AMS7325C
In Force
1966-09-01
RINGS, SEALING, TUBULAR METAL, CORROSION AND HEAT RESISTANT STEEL
SAE

SAE AMS7295/2B
In Force
1998-07-01
Radiographic Film 5-60
SAE

SAE AS14103D
In Force
2008-03-25
BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, WIDE, GROOVED RACE, -65 TO +325 °F
SAE

SAE AS21154B
In Force
2011-12-15
BEARING, PLAIN, SELF-ALIGNING, GROOVED OUTER RING
SAE

SAE AS1926-6
In Force
1941-12-12
AS1926 Bolt Block
SAE

SAE AS1132G
In Force
2004-03-19
Bolts, Screws and Nuts - External Wrenching UNJ Thread, Inch - Design Standard
SAE

SAE AMSWWT700/6C
In Force
2015-09-14
Tube, Aluminum Alloy, Drawn, Seamless, 6061
SAE

SAE AMSS8802C
In Force
2011-03-28
Sealing Compound, Temperature Resistant, Integral Fuel Tanks and Fuel Cell Cavities, High Adhesion
SAE

SAE ARP600
In Force
1996-05-01
TORQUE DETERMINATION, METHOD OF, FOR TUBE OR HOSE END FITTING CONNECTIONS, FLARED, FLARELESS, OR MISCELLANEOUS SCREW THREAD STYLE
SAE

SAE AS1299A
In Force
1980-06-01
ADAPTER — BOSS CONNECTION RING LOCKED TO FLARELESS TUBE
SAE

SAE ARP583F
In Force
1993-05-01
FLIGHT ATTENDANT STATIONS
SAE

SAE ARP5483/2B
In Force
2026-05-14
Rolling Element Bearing Hardness Test
SAE

SAE AMS7234D
In Force
1984-10-01
RIVETS, BLIND, CORROSION RESISTANT ALLOY 67Ni - 31Cu
SAE

SAE AS1355
In Force
1974-03-01
ULTRASONIC TRANSDUCERS, IMMERSION AND CONTACT Performance Parameters
SAE

SAE AS1032A
In Force
1968-11-15
REDUCER TEE - BULKHEAD & INTERNALLY THREADED PORT ON RUN, FLARED TUBE
SAE

SAE AS21220B
In Force
2006-09-22
BEARING, ROLLER, ROD END, INTERNAL THREAD, SELF-ALIGNING, ANTI-FRICTION, AIRFRAME, HEAVY DUTY, TYPE II, -67 TO 350 °F, SEALED
SAE

SAE ARP1282
In Force
1993-05-01
SURVIVAL KIT - LIFE RAFTS AND SLIDE/RAFTS
SAE

SAE AS13500-4
In Force
1979-01-01
AS13500-599 Bolt, Machine-Double Hexagon Extended Washer Head, HR650 .247-28 UNS. 3A
SAE

SAE AS20708/8B
In Force
2016-06-09
Synchro, Control Transmitter, Type 26V-11CX4C
SAE

SAE ARP6283
In Force
2024-10-07
In-Service Fiber Optic Inspection, Evaluation and Cleaning, Best Practices, Physical Contact Termini
SAE

SAE AMS7468B
In Force
1993-10-01
Bolts And Screws, Corrosion-Resistant Work-Strengthened Alloyforged Head, Roll Threaded After Aging
SAE

SAE AS1005D
In Force
1992-09-01
TEE, STANDARD AND REDUCER, FLARELESS TUBE
SAE

SAE AS1004H
In Force
2022-05-04
FITTING, ELBOW, 90°, STANDARD AND REDUCER, FLARELESS
SAE

SAE AMS7852C
In Force
2017-01-11
Columbium (Niobium) Alloy Sheet, Strip, and Plate, 10Hf - 1.0Ti
SAE

SAE AS20708/32A
In Force
2011-02-24
Synchro, Torque Receiver Transmitter, Type 18TRX4A
SAE

SAE ARP488C
In Force
1991-05-01
EXITS AND THEIR OPERATION - AIR TRANSPORT CABIN EMERGENCY
SAE

SAE AMS7273B
In Force
1979-10-01
RINGS, SEALING, FLUOROSILICONE RUBBER High Temperature Fuel and Oil Resistant 70 - 80
SAE

SAE AS1635C
In Force
2007-01-19
HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARELESS, STRAIGHT TO 90°
SAE

SAE ARP1256D
In Force
2011-07-19
Procedure for the Continuous Sampling and Measurement of Gaseous Emissions from Aircraft Turbine Engines
SAE

SAE AMS3795/3B
In Force
2016-06-13
Webbing, Woven Nylon Fabric 12,000 Pounds (53,400 N), 3.3 Ounces/Yards (102.5 g/m)
SAE

SAE AMSA8576
In Force
2005-06-10
Adhesive, Acrylic Base, for Acrylic Plastic
SAE

SAE AMS7211E
In Force
1983-04-01
COTTER PINS, STEEL, CORROSION AND HEAT RESISTANT 18Cr - 10.5Ni - 0.40Ti
SAE

SAE AMSS5626A
In Force
2002-01-24
Steel: Chrome-Molybdenum (4140) Bars Rods, and Forging Stock (For Aircraft Applications)
SAE

SAE AMS6327B
In Force
1945-07-01
STEEL .55 Ni - .5 Cr - .25 Mo (.38 - .43C) Heat Treated (125,000 TS)
SAE

SAE AMS6413K
In Force
2006-06-21
Steel, Mechanical Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (SAE 4337)
SAE

SAE AMS4025B
In Force
1951-10-01
ALUMINUM ALLOY SHEET AND PLATE 1.0Mg - 0.6Si - 0.25Cu (61S-0)
SAE

SAE AMSQQW428/2B
In Force
2017-08-01
Wire, Steel, High Carbon, Round, Type III
SAE

SAE AS1130G
In Force
2013-01-03
Air and Air/Surface (Platform) Cargo Pallets
SAE

SAE AMS7240F
In Force
2007-07-19
Washers, Spring Lock, Carbon Steel
SAE

SAE ARP578
In Force
1994-07-01
Detail Requirements for 4,000 & 5,000 Psi Aircraft Hydraulic Systems
SAE

SAE AS1039C
In Force
1994-01-01
TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARED TUBE
SAE

SAE AS1346
In Force
1974-03-01
1992 Thermocompression Bonding of Gold Beam Leads
SAE

SAE ARP5596B
In Force
2012-01-05
Cargo Shoring Guidelines
SAE

SAE AS21155B
In Force
2011-12-15
BEARING, PLAIN, SELF-ALIGNING, CHAMFERED OUTER RING
SAE

SAE AS20708/36A
In Force
2011-02-24
Synchro, Control Differential Transmitter, Type 18CDX6D
SAE

SAE AMS7490K
In Force
1977-07-01
RINGS, FLASH WELDED Corrosion and Heat Resistant Austenitic Steels and Austenitic-Type Alloys
SAE

SAE AMS3845/2B
In Force
1992-01-01
Cloth, Type "E" Glass, "B" Stage Polyimide-Resin-Impregnated 181 Style Fabric, High-Flow Addition - Cure Resin for Press Cure At 40-100 Psi (275-690 Kpa) Or Vacuum/Autoclave Processing
SAE

SAE AMS4148A
In Force
1981-07-01
ALUMINUM ALLOY DIE FORGINGS 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T66) Solution and Precipitation Heat Treated
SAE

SAE AMS6413N
In Force
2020-12-18
Steel, Mechanical Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (4337)