Normas SAE
Filtrar:
SAE
SAE AMS4128C
In Force
2001-11-15
Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu -
0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching
SAE
SAE AMS5225G
In Force
2021-06-01
Iron-Nickel Alloy, Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution
Heat Treated, Cold Rolled, 50% Reduction
SAE
SAE AMS5540H
In Force
1970-05-01
ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base
- 15.5Cr - 8.0Fe
SAE
SAE AMS5540K
In Force
1988-10-01
ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT 74Ni -
15.5Cr - 8.0Fe Annealed
SAE
SAE AMS3902C
In Force
1995-05-01
CLOTH, ORGANIC FIBER (PARA-ARAMID), HIGH MODULUS For Structural Composites
SAE
SAE AMS4128E
In Force
2021-06-28
Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu -
0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching
SAE
SAE AMS5338C
In Force
2011-08-10
STEEL CASTINGS, INVESTMENT 0.95Cr - 0.20Mo (0.35 - 0.45C) Normalized
SAE
SAE AMS5755E
In Force
2000-09-01
Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings
64Ni - 5.0Cr - 24.5Mo - 5.5Fe Solution Heat Treated
SAE
SAE AMS3894/14B
In Force
2016-09-13
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 90000 (621)
Tensile, 40000000 (276) Modulus, 175 (347)
SAE
SAE
SAE AMS6417H
In Force
2015-07-08
Steel, Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo -
0.08V (0.38 - 0.43C) Consumable Electrode Vacuum Remelted
SAE
SAE AMS5848D
In Force
2009-03-25
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Extrusions, Tubing,
and Rings Wear and Galling Resistant 8.0Mn – 4.0Si – 17Cr – 8.5Ni –
0.13N Solution Heat Treated
SAE
SAE AMS4067E
In Force
1976-07-01
ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN, ROUND 1.25Mn - 0.12Cu (3003-H14)
SAE
SAE ARP958C
In Force
2026-05-24
ELECTROMAGNETIC INTERFERENCE MEASUREMENT ANTENNAS; STANDARD CALIBRATION METHOD
SAE
SAE AMS7251A
In Force
1969-11-01
NUTS, SELF-LOCKING, CORROSION AND HEAT RESISTANT High Strength,
Prevailing-Torque, All Metal 1200 F (649 C) Use, Unified "J"
(MIL-S-8879) Thread Form
SAE
SAE AMS6386C
In Force
2011-11-03
Steel Sheet and Plate Low Alloy, Heat Treated 90,000 psi (621 MPa) and
100,000 psi (690 MPa) Yield Strength
SAE
SAE AMS5890E
In Force
2009-07-16
Nickel, Corrosion and Heat-Resistant, Bars, Forgings, and Extrusions
Thoria Dispersion Strengthened 2.2ThO2 Stress-Relieved
SAE
SAE AMS5827B
In Force
1979-07-16
STEEL WELDING ELECTRODES, COVERED, CORROSION RESISTANT 16.4Cr - 4.8Ni -
0.22(Cb + Ta) - 3.6Cu
SAE
SAE AMS7454F
In Force
1972-11-01
BOLTS AND SCREWS, STEEL, LOW-ALLOY HEAT-RESISTANT Normalized and
Tempered, Roll Threaded
SAE
SAE AS21220A
In Force
2005-08-03
BEARING, ROLLER, ROD END, INTERNAL THREAD, SELF-ALIGNING, ANTI-FRICTION,
AIRFRAME, HEAVY DUTY, TYPE II, -67° TO 350°F, SEALED
SAE
SAE AMS7272D
In Force
1980-07-01
RINGS, SEALING, NITRILE RUBBER Synthetic Lubricant Resistant 65 - 75
SAE
SAE
SAE AMS6413M
In Force
2016-01-19
Steel, Mechanical Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (4337)
SAE
SAE AMS4159D
In Force
2008-05-01
Aluminum Alloy, Extrusions 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T76511)
Solution Heat Treated, Stress Relieved, Straightened, and Overaged
SAE
SAE AMS6423F
In Force
2010-04-19
Steel Bars, Forgings, and Tubing 0.92Cr - 0.75Ni - 0.52Mo - 0.003B -
0.04V (0.40 - 0.46C) (Modified 96BV40)
SAE
SAE AMSQQW428A
In Force
2013-04-03
Wire, Steel, Carbon (High Carbon, Round, For Mechanical Springs, General Purpose)
SAE
SAE AMS6351A
In Force
1966-09-30
STEEL, PLATE, SHEET, AND STRIP 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Spheroidized
SAE
SAE
SAE ARP1232D
In Force
2025-06-17
Gland Design Criteria and Dimensions for Static Radial O-Ring Seal
Applications Without Anti-Extrusion Devices Specifically for Engine and
Engine Control Systems
SAE
SAE AMS6945B
In Force
2014-04-30
Titanium Alloy, Single Melt, Sheet, Strip, and Plate 6Al - 4V Annealed
SAE
SAE AMS4147E
In Force
2018-08-03
Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7352)
Solution Heat Treated, Stress Relieved by Compression, and Overaged
SAE
SAE AMS6433C
In Force
1980-04-15
STEEL SHEET, STRIP, AND PLATE 0.80Cr - 1.8Ni - 0.35Mo - 0.20V
(0.33-0.38C) Special Grade
SAE
SAE AMS6263D
In Force
1966-03-15
STEEL BARS, FORGINGS, AND TUBING 1.2Cr - 3.25Ni - 0.12Mo (0.11 - 0.17C)
(SAE 9315)
SAE
SAE
SAE
SAE AMS5890B
In Force
1988-10-01
NICKEL BARS, FORGINGS, AND EXTRUSIONS, CORROSION AND HEAT RESISTANT
Thoria Dispersion Strengthened 2.2ThO2 Stress-Relieved
SAE
SAE
SAE AS103C
In Force
2017-10-18
FITTING ASSEMBLY, CROSS, FLARELESS AND SHORT FLARELESS, REDUCER,
RETAINED NUT
SAE
SAE
SAE AMS6312C
In Force
1978-01-15
STEEL BARS, FORGINGS, AND TUBING 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640)
SAE
SAE AMS6532K
In Force
2024-01-16
Steel, Bars and Forgings, and Forging Stock 3.1Cr - 11.5Ni - 13.5Co -
1.2Mo (0.23 - 0.25C) Vacuum Melted, Normalized and Overaged
Precipitation Hardenable
SAE
SAE
SAE
SAE
SAE ARP597B
In Force
1979-11-01
WHEELS AND BRAKES, SUPPLEMENTARY CRITERIA FOR DESIGN ENDURANCE CIVIL
TRANSPORT AIRCRAFT
SAE
SAE
SAE AMS7475B
In Force
1991-01-01
Bolts and Screws, Work-Strengthened Alloy, Corrosion and Heat Resistant,
Forged Head, Roll Threaded After Aging
SAE
SAE AMS6443F
In Force
2000-10-01
Steel Bars, Forgings, and Tubing 1.0Cr (0.98 - 1.10C) (SAE 51100)
Consumable Electrode Vacuum Melted
SAE
SAE AMS6431R
In Force
2022-03-09
Steel, Bars, Forgings, Mechanical Tubing, and Forging Stock 1.05Cr -
0.55Ni - 1.0Mo - 0.11V (0.45 - 0.50C) (D6AC) Vacuum Consumable Electrode Remelted
SAE
SAE
SAE
SAE
SAE AMS7246B
In Force
1993-10-01
Inserts, Thread Form, Corrosion and Heat Resistant Alloy 72ni 15.5cr
0.95(Cb + Ta) 2.5ti 0.70al 7.0fe
SAE
SAE AMS7476C
In Force
1982-01-01
Bolts and Screws, Steel, Corrosion and Heat Resistant Roll Threaded
SAE
SAE AMS6945A
In Force
2010-07-13
Titanium Alloy, Single Melt, Sheet, Strip, and Plate 6Al - 4V Annealed
SAE
SAE AMS4082L
In Force
1989-04-01
ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN 1.0Mg - 0.60Si - 0.28CU - 0.20Cr
(6061-T6) Solution and Precipitation Heat Treated
SAE
SAE AMS6543C
In Force
2001-10-01
Steel, Bars and Forgings, Maraging 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0.10 -
0.14C) Double Vacuum Melted, Solution Heat Treated
SAE
SAE ARP458
In Force
2002-12-16
Universal Maintenance & Overhaul Stand for Turbo-Jet (10,000 Lbs.
Thrust Class) and Turbo-Prop Engines
SAE
SAE AS21438E
In Force
2025-12-11
BEARING, ROLLER, NEEDLE, SINGLE ROW, HEAVY DUTY, TRACK ROLLER, SEALED,
TYPE V ANTIFRICTION, INCH
SAE
SAE ARP1257A
In Force
1972-07-01
GAS TURBINE ENGINE TRANSIENT PERFORMANCE PRESENTATION FOR DIGITAL
COMPUTER PROGRAMS
