AENOR Logo

Normas SAE

49877 Available results

Filtrar:

(40986)
(8891)
SAE

SAE AMS4414
In Force
2019-09-19
Aluminum Alloy, Hand Forgings 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr (7085-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged
SAE

SAE AMS5355D
In Force
2011-08-10
STEEL CASTINGS, INVESTMENT, CORROSION RESISTANT 16Cr - 4.1Ni - 0.28 (Cb+Ta) - 3.2Cu Solution Heat Treated
SAE

SAE AMS5115E
In Force
1977-01-01
CARBON STEEL WIRE Valve Spring Quality 0.60 - 0.75C
SAE

SAE AMS3777/7B
In Force
1995-10-01
Tape, Nylon, Nonmelting, Reinforcing 2 (50) Wide, 1500 (6670 N) Breaking Strength
SAE

SAE AMS2800E
In Force
2017-02-09
Identification Finished Parts
SAE

SAE AMS2315B
In Force
1988-10-01
DETERMINATION OF DELTA FERRITE CONTENT
SAE

SAE AMS2759/7C
In Force
2018-06-11
Carburizing and Heat Treatment of Carburizing Grade Steel Parts
SAE

SAE AMS2694B
In Force
2007-02-27
In-Process Welding of Castings
SAE

SAE AMS3196A
In Force
1965-02-15
SILICONE RUBBER SPONGE Closed Cell Firm
SAE

SAE AMS3628C
In Force
2011-08-12
PLASTIC EXTRUSIONS AND MOLDINGS, POLYCARBONATE General Purpose
SAE

SAE AMS2401G
In Force
2002-06-26
Plating, Cadmium Low Hydrogen Content Deposit
SAE

SAE AMS3226A
In Force
1943-10-01
SYNTHETIC RUBBER Hot Oil and Coolant Resistant - Low Swell (45-55)
SAE

SAE AMS3053A
In Force
2012-11-08
Grease, Water Resistant Polyalphaolefin Base
SAE

SAE AMS2431/2D
In Force
2007-05-15
Peening Media (ASH) Cast Steel Shot, High Hardness (55 to 62 HRC)
SAE

SAE AMS2431/1G
In Force
2022-11-22
Peening Media (ASR) Cast Steel Shot, Regular Hardness (45 to 52 HRC)
SAE

SAE AMS3662D
In Force
2015-05-13
Polytetrafluoroethylene Film General Purpose Grade
SAE

SAE AMS3239F
In Force
2008-06-04
Butyl (IIR) Rubber Phosphate Ester Resistant 85 - 95
SAE

SAE AMS3610B
In Force
1949-02-01
BARRIER MATERIAL, WATER VAPOR RESISTANT, FLEXIBLE, TRANSPARENT
SAE

SAE AMS2241R
In Force
2012-10-10
Tolerances, Corrosion and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire
SAE

SAE AMS3125A
In Force
1948-05-01
ENAMEL, ENGINE GRAY BAKING Glyceryl Phthalate
SAE

SAE AMS3695/1
In Force
2022-01-20
Adhesive Film, Epoxy-Base, High Durability For 95 °C (200 °F) Service
SAE

SAE AMS1475B
In Force
1994-03-01
DEODERANT, AIRCRAFT TOILET Formaldehyde Base
SAE

SAE AMS2410H
In Force
1994-01-01
Plating, Silver Nickel Strike, High Bake
SAE

SAE AMS3087A
In Force
1948-09-01
COMPOUND, INSULATING AND SEALING
SAE

SAE AMS2204F
In Force
1994-04-01
TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE

SAE AMS2632B
In Force
2018-08-08
Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness
SAE

SAE AMS3718/6B
In Force
2016-06-14
Webbing, Woven Nylon For Decelerators 1 3/4 (44) Wide, 10,000 (44,500) Breaking Strength
SAE

SAE AMS3276B
In Force
1998-03-01
SEALING COMPOUND, INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 °F (182 °C)
SAE

SAE AMS3676B
In Force
1991-10-01
INSULATION, SOUND AND THERMAL Resin-Bonded Glass Fiber, Medium Filament
SAE

SAE AMS2370J
In Force
2007-11-16
Quality Assurance Sampling and Testing, Carbon and Low-Alloy Steel Wrought Products and Forging Stock
SAE

SAE AMS3661A
In Force
1976-07-01
POLYTETRAFLUOROETHYLENE FILM Premium Grade
SAE

SAE AMS3032A
In Force
1948-07-01
AVIATION FUEL Grade 100/130
SAE

SAE AMS2635B
In Force
1967-04-01
RADIOGRAPHIC INSPECTION
SAE

SAE AMS2448D
In Force
2025-11-12
Application of Tungsten Carbide Coatings on Ultrahigh-Strength Steels, High-Velocity Oxygen/Fuel Process
SAE

SAE AMS2262G
In Force
2013-10-21
Tolerances Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip, and Plate
SAE

SAE AMS3193B
In Force
1985-01-01
SILICONE RUBBER SPONGE Closed Cell, Medium, Extreme Low Temperature
SAE

SAE AMS3143B
In Force
2016-05-18
Powder Coating Material
SAE

SAE AMS3732B
In Force
2015-05-13
Potting Compound, Epoxy One Part, Filled, Heat Cure, Low CTE
SAE

SAE AMS2418K
In Force
2021-12-13
Plating, Copper
SAE

SAE AMS3194F
In Force
2019-06-14
Silicone Rubber Sponge Closed Cell, Firm, Extreme Low Temperature
SAE

SAE AMS4845F
In Force
1988-04-01
TIN BRONZE CASTINGS, SAND AND CENTRIFUGAL 87.5Cu - 10Sn - 2Zn As Cast
SAE

SAE AMS5515D
In Force
1961-07-01
STEEL SHEET AND STRIP, CORROSION RESISTANT 18Cr - 8Ni (SAE 30302) Deep and Shallow Forming
SAE

SAE AMS4472B
In Force
2022-10-13
Aluminum Alloy, Plate 4.0Cu - 1.0Li - 0.40Mg - 0.35Ag - 0.13Zr (2195-T34) Solution Heat Treated and Stress Relieved
SAE

SAE AMS4363C
In Force
1978-01-15
MAGNESIUM ALLOY FORGINGS 2.0Th - 0.78Mn (HM21A-T5)
SAE

SAE AMS3798/3C
In Force
2015-04-14
Webbing, Low Modulus Aramid 3/4 (19) Wide, 600 (2669) Breaking Strength Herringbone Twill
SAE

SAE AMS4474B
In Force
2021-09-13
Aluminum Alloy, Sheet and Plate 4.0Cu - 1.0Li - 0.40Mg - 0.35Ag - 0.13Zr (2195-T8) Solution Heat Treated, Cold Worked, and Artificially Aged
SAE

SAE AMS4928E
In Force
1970-05-01
TITANIUM ALLOY BARS AND FORGINGS 6Al - 4V Annealed, 120,000 psi Yield
SAE

SAE AMS4083A
In Force
1949-11-01
ALUMINUM ALLOY TUBING 1.0Mg - 0.6Si - 0.25Cu - 0.25Cr (61S-T6) Hydraulic
SAE

SAE AMS4408A
In Force
2018-02-12
Aluminum Alloy, Plate (7140-T7651) 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved, and Overaged
SAE

SAE AMS4474A
In Force
2015-08-12
Aluminum Alloy, Sheet and Plate 4.0Cu - 1.0Li - 0.40Mg - 0.35Ag - 0.13Zr (2195-T8) Solution Heat Treated, Cold Worked, and Artificially Aged
SAE

SAE AMS4162E
In Force
2014-09-19
Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T8511) Solution Treated, Stress Relief Stretched, Straightened, and Precipitation Heat Treated
SAE

SAE AMS5523B
In Force
1978-01-01
STEEL SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT 23Cr - 13.5 Ni (309S)
SAE

SAE AMS4505J
In Force
2003-12-12
Copper Alloy (Brass), Sheet, Strip, and Plate 70Cu - 30Zn Annealed (OS035)
SAE

SAE AMS3095B
In Force
2022-09-14
Paint System: High Gloss for Aircraft Exterior
SAE

SAE AMS3196B
In Force
1968-05-01
SILICONE RUBBER SPONGE Closed Cell, Firm
SAE

SAE AMS4976D
In Force
1988-10-01
TITANIUM ALLOY FORGINGS 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo Solution and Precipitation Heat Treated
SAE

SAE AMS4553D
In Force
2017-08-17
Brass, Seamless, Tubing 85Cu - 15Zn Annealed (O61)
SAE

SAE AMS4188/5
In Force
2002-12-16
ALUMINUM ALLOY WELDING WIRE 7.0Si - 0.52Mg (357.0)
SAE

SAE AMS4767A
In Force
1966-03-15
BRAZING ALLOY, SILVER 92.5Ag - 7.2Cu - 0.22Li
SAE

SAE AMS4162F
In Force
2020-07-01
Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T8511) Solution Treated, Stress Relief Stretched, Straightened, and Precipitation Heat Treated