AENOR Logo

Normas SAE

49877 Available results

Filtrar:

(40986)
(8891)
SAE

SAE AGS3012-7
In Force
1958-05-16
AGS3012 Pipe Couplings (Steel). Cone Union Adaptor/Unified Attachment End 3/16" to 1/2", for Use with Parallel Gaskets (e.g. Bonded Seals)
SAE

SAE AMS2615D
In Force
1995-05-01
PRESSURE TESTING, HYDRAULIC Pressure as Specified
SAE

SAE AMS4764C
In Force
1991-07-01
BRAZING FILLER METAL, COPPER 52.5Cu - 38Mn - 9.5Ni 1615° - 1700°F (879° - 927°C) Solidus-Liquidus Range
SAE

SAE AMS2231G
In Force
1992-04-01
TOLERANCES Carbon Steel Bars
SAE

SAE AMS2816U
In Force
1993-10-01
IDENTIFICATION Welding Wire, Tab Marking Method
SAE

SAE AMS3346A
In Force
1962-01-01
SILICONE RUBBER 1000 psi (55 - 65)
SAE

SAE AMS3255
In Force
2000-08-01
Sealing Tape, Polytetrafluoroethylene, Expanded (EPTFE) Oil and Water Resistant
SAE

SAE AMS4126C
In Force
2010-10-18
Aluminum Alloy, Die and Hand Forgings and Rolled Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6) Solution and Precipitation Heat Treated
SAE

SAE AMS3288
In Force
2002-12-16
Felt, Upholstery (100% Wool)
SAE

SAE AMS2451/4D
In Force
2017-12-11
Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement
SAE

SAE AMS4399
In Force
2016-05-12
Magnesium Alloy Welding Wire 5.1Y - 3.0Re - 0.7Zr (WE54A)
SAE

SAE AIR4545
In Force
2003-11-21
Method of Evaluating Pneumatic Ground Power Units
SAE

SAE AMS2664G
In Force
2025-06-17
Brazing, Silver For Use Up to 800 °F (427 °C)
SAE

SAE AGS2003-14
In Force
1984-03-12
AGS2003 Stiffnuts - Hexagon - Countersunk
SAE

SAE AMS3571/2A
In Force
1984-07-01
RESIN, POLYETHER URETHANE (EU) CASTING Flexible, Solid, Unfilled 55 Durometer "A"
SAE

SAE AMS4342D
In Force
2000-08-01
Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74511) Solution Heat Treated, Stress Relieved, Straightened, and Overaged
SAE

SAE AMS2410L
In Force
2018-07-27
Plating, Silver Nickel Strike, High Bake
SAE

SAE AIR1335B
In Force
2018-07-02
Ramp De-Icing
SAE

SAE AMS4171A
In Force
1960-01-01
ALUMINUM ALLOY EXTRUSIONS 4.3Zn - 3.3Mg - 0.6Cu - 0.2Mn - 0.17Cr (7079-T6)
SAE

SAE AMS1800A
In Force
1994-10-01
FOAM, FIRE EXTINGUISHING LIQUID Protein and Fluoroprotein
SAE

SAE AMS3111
In Force
1945-10-01
Compound, Zinc Chromate, Slushing
SAE

SAE AMS3799C
In Force
2016-01-11
Webbing, Tubular, Low-Modulus Aramid-54
SAE

SAE AMS4321
In Force
1992-04-01
ALUMINUM ALLOY FORGINGS 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-01) High Temperature Annealed
SAE

SAE AMS3670/2B
In Force
2006-01-06
Polyamide-Imide Bar, Rod, and Shapes 20 Graphite - 3 Polytetrafluorethylene (PTFE) Filled
SAE

SAE AIR1076
In Force
2025-09-11
AIRCRAFT FIRE PROTECTION FOR RECIPROCATING AND GAS TURBINE ENGINE INSTALLATIONS
SAE

SAE AGS1725-7
In Force
1963-05-07
AGS1725 Blanking Discs. (For Use under Gland Nuts Where Cable Sleeves Are Not Fitted)
SAE

SAE AMS2248H
In Force
2022-05-12
Chemical Check Analysis Limits, Corrosion- and Heat-Resistant Steels and Alloys, Maraging and Other Highly Alloyed Steels, and Iron Alloys
SAE

SAE AMS4447B
In Force
1968-05-01
MAGNESIUM ALLOY CASTINGS, SAND 3.3Th - 2.1Zn - 0.8Zr (HZ32A-T5)
SAE

SAE AMS2412L
In Force
2020-01-16
Plating, Silver Copper Strike, Low Bake
SAE

SAE AMS3799/1B
In Force
2006-01-06
Webbing, Tubular, Low Modulus Aramid 9/16 (14) Wide, 1400 (6228) Breaking Strength
SAE

SAE AMS3590C
In Force
1991-10-01
PLASTIC SHEET, COPPER FACED Paper Reinforced Phenolic Resin
SAE

SAE AMS2470E
In Force
1962-06-01
ANODIC TREATMENT OF ALUMINUM BASE ALLOYS Chromic Acid Process
SAE

SAE AMS4769F
In Force
2009-06-10
Silver Alloy, Brazing Filler Metal 45Ag - 24Cd - 16Zn - 15Cu 1125 to 1145 °F (607 to 618 °C) Solidus-Liquidus Range
SAE

SAE AMS3825
In Force
1982-01-01
Fabric, Glass (181) (Chrome Treated)
SAE

SAE AMS2202E
In Force
1962-06-30
TOLERANCES Aluminum and Magnesium Alloy Sheet and Plate
SAE

SAE AGS981-5
In Force
1975-03-01
AGS981 Female Flanges. (Bolted.) (Steel)
SAE

SAE AMS4248D
In Force
2018-07-27
Aluminum Alloy Hand Forgings and Rolled Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T652) Solution Heat Treated, Stress Relief Compressed, and Precipitation Heat Treated
SAE

SAE AMS2413A
In Force
1966-09-01
SILVER AND RHODIUM PLATING
SAE

SAE AMS3568/1B
In Force
2011-08-25
Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 5 Pounds/Cubic Foot (80 kg/m3) Density
SAE

SAE AMS2448D
In Force
2025-11-12
Application of Tungsten Carbide Coatings on Ultrahigh-Strength Steels, High-Velocity Oxygen/Fuel Process