AENOR Logo

Normas SAE

49877 Available results

Filtrar:

(40986)
(8891)
SAE

SAE AMS4409
In Force
2013-05-24
Aluminum Alloy, Plate 4.0Zn - 2.0Mg - 0.32Mn (7019-T651) Solution Heat Treated, Stress Relieved and Artificially Aged
SAE

SAE AS3194-3
In Force
1949-12-12
AS3194 Knob (Glider Release Control)
SAE

SAE AMS2414F
In Force
1998-10-01
Plating, Lead
SAE

SAE AGS966-7
In Force
1936-08-20
AGS966 Cock. (No. 2 Size) with Diffuser
SAE

SAE AMS2631F
In Force
2021-06-22
Ultrasonic Inspection Titanium and Titanium Alloy Bar, Billet and Plate
SAE

SAE AMS2620C
In Force
1988-10-01
PRESSURE TESTING, HYDRAULIC 1000 psi
SAE

SAE AMS4082R
In Force
2020-06-11
Aluminum Alloy, Seamless Drawn Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated
SAE

SAE AMS4713D
In Force
1989-10-01
WIRE, BRASS 65Cu - 35Zn Eighth-Hard (HOO)
SAE

SAE AS425C
In Force
1994-05-01
NOMENCLATURE AND ABBREVIATIONS FOR USE ON THE FLIGHT DECK
SAE

SAE AMS4045G
In Force
1991-10-01
ALUMINUM ALLOY SHEET AND PLATE 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075; -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated
SAE

SAE AMS2241R
In Force
2012-10-10
Tolerances, Corrosion and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire
SAE

SAE AMS2482D
In Force
2010-01-05
Hard Anodic Coating on Aluminum Alloys Polytetrafluoroethylene (PTFE)-Impregnated or Codeposited
SAE

SAE AS39029/79
In Force
2006-10-04
CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-28748/9 CONNECTORS)
SAE

SAE AMS3671B
In Force
1992-10-01
PLASTIC MOLDING COMPOUND, NOVOLAC EPOXY RESIN, SHORT GLASS FIBER REINFORCED, STRUCTURAL
SAE

SAE AMS3158A
In Force
2011-08-09
SOLUTION, FLUORESCENT PENETRANT Water Base
SAE

SAE AIR1758
In Force
2012-10-19
Limits and Fits - International Metric Tolerance System
SAE

SAE AMS4078C
In Force
1984-04-01
ALUMINUM ALLOY PLATE 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351) Solution Heat Treated, Stress Relieved, and Overaged
SAE

SAE AMS4429B
In Force
2019-08-01
Magnesium Alloy, Sand Castings 2.8Nd - 1.4Gd - 0.4Zn - 0.6Zr (EV31A - T6) Solution and Precipitation Heat Treated
SAE

SAE AMS4614H
In Force
2017-09-21
Brass Forgings, Free Cutting 60Cu - 2.0Pb - 37.5Zn As Forged (M10)
SAE

SAE AIR4170B
In Force
2016-08-19
Reticulated Polyurethane Foam Explosion Suppression Material for Fuel Systems and Dry Bays
SAE

SAE AMS3653A
In Force
1959-01-01
TUBING, ELECTRICAL INSULATION Extruded Polytetrafluoroethylene
SAE

SAE AMS3244H
In Force
2011-09-23
Chloroprene (CR) Rubber Flame Resistant 65 - 75
SAE

SAE AMS4425C
In Force
2011-11-07
Magnesium Alloy Castings, Sand 5.8Zn - 2.5RE - 0.70Zr (ZE63-T6) Solution and Precipitation Heat Treated
SAE

SAE AMS3731/6B
In Force
1993-01-01
POTTING COMPOUND, EPOXY Bisphenol A-Type Syntactic Foam, Heat Cure
SAE

SAE AMS2310F
In Force
2015-05-21
Qualification Sampling and Testing of Steels for Transverse Tensile Properties
SAE

SAE AS4233D
In Force
2019-08-16
FITTING, ELBOW, 90°, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING
SAE

SAE AMS3798/9B
In Force
1999-01-01
Webbing, Low Modulus Aramid 1-23/32 (44) Wide, 6500 (28,913) Breaking Strength Herringbone Twill Resin Treated
SAE

SAE AIR1850A
In Force
1997-06-01
Twin Engine Helicopter Power Requirements
SAE

SAE AMS3655A
In Force
1991-10-01
TUBING, ELECTRICAL INSULATION Thin Wall, Extruded Polytetrafluoroethylene (PTFE)
SAE

SAE AMS2632A
In Force
2008-10-22
Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness
SAE

SAE AS4375B
In Force
2003-01-30
FITTING END, FLARELESS, DESIGN STANDARD
SAE

SAE AMS3050/1A
In Force
2025-01-22
Performance Specification Anti-Seize Thread Compound, High Temperature - Copper Only
SAE

SAE AMS3711E
In Force
2013-07-16
Core, Honeycomb Fibrous, Aramid Base, Phenolic Coated
SAE

SAE AMS3756
In Force
2011-08-25
POLYTETRAFLUOROETHYLENE MOLDINGS, GLASS FIBER FILLED 75 PTFE Resin, 25 Glass, As Sintered
SAE

SAE AMS4767E
In Force
1992-04-01
SILVER ALLOY BRAZING FILLER METAL 92.5Ag - 7.2Cu - 0.22Li 1435 to 1635 °F (779 to 891 °C) Solidus-Liquidus Range
SAE

SAE AGS1767-2
In Force
1962-02-13
AGS1767 Cable End Fitting for Magneto Low Tension Connection
SAE

SAE AMS2665D
In Force
1983-10-01
SILVER BRAZING For Use Up to 400°F (205°C)
SAE

SAE AMS4146A
In Force
1966-03-01
ALUMINUM ALLOY FORGINGS 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T4)
SAE

SAE AMS3568/2B
In Force
2011-08-25
Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 15 Pounds/Cubic Foot (240 kg/m3) Density
SAE

SAE AMS3361C
In Force
2012-01-17
Silicone Potting Compound, Elastomeric Two-Part, General Purpose 150 to 400 Poise (15 to 40 Pa·s) Viscosity