Normas SAE
Filtrar:
SAE
SAE
SAE
SAE
SAE
SAE
SAE AMS5731L
In Force
2018-10-10
Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and
Rings 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable
Electrode Melted, 1800 °F (982 °C) Solution Heat Treated
SAE
SAE AMS5808B
In Force
1998-10-01
Steel, Corrosion and Heat Resistant, Welding Wire 19Cr - 13Ni - 2.5Mo
High Ferrite Grade, Trace Element Controlled
SAE
SAE ARP4118A
In Force
2013-08-15
Isolation and Corrosion Protection of Dissimilar Materials, Carbon
Composite Structure Repair
SAE
SAE AS4156B
In Force
2012-12-06
Color-Coded Incandescent Flange Base T-1 and T-1 3/4 Lamps for Voltage Identification
SAE
SAE AMS4507K
In Force
2026-04-07
Copper Alloy (Brass), Sheet, Strip, and Plate, 70Cu - 30Zn, Half Hard (H02)
SAE
SAE AMS5892D
In Force
2025-06-30
Alloy, Sheet and Strip 42Fe - 37.5Ni - 14Co - 4.8Cb (Nb) - 1.6Ti (Alloy
909) Solution Heat Treated, Precipitation Hardenable Multiple Melted,
High Temperature, Low Expansion
SAE
SAE
SAE AS3482C
In Force
2007-06-28
NUT, SELF-LOCKING, PLATE, SIDE BY SIDE, REDUCED RIVET SPACING, LOW
HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F
SAE
SAE
SAE
SAE
SAE AMS4385J
In Force
2000-07-01
Magnesium Alloy, Sheet and Plate 3.2Th - 0.70Zr Cold Rolled and
Partially Annealed
SAE
SAE
SAE AMS5862F
In Force
2003-09-05
Steel, Corrosion-Resistant, Sheet, Strip, and Plate 15Cr - 4.5Ni -
0.30Cb - 3.5Cu Consumable Electrode Remelted, Solution Heat Treated
Precipitation Hardenable
SAE
SAE AMS4175A
In Force
1987-04-01
HONEYCOMB CORE, ALUMINUM ALLOY For Sandwich Construction 5052, 350 (175)
SAE
SAE
SAE AS4468A
In Force
1999-11-01
Hose Assembly, 125 psi, Lined Silicone, Potable Water, Procurement Specification
SAE
SAE AMS5572A
In Force
1951-12-01
STEEL TUBING, SEAMLESS, CORROSION AND HEAT RESISTANT 25Cr - 20Ni (SAE 30310)
SAE
SAE
SAE AS4798C
In Force
2010-11-08
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE
WATER, STRAIGHT FEMALE TO 90° MALE
SAE
SAE AS1132J
In Force
2016-02-24
Bolts, Screws and Nuts - External Wrenching UNJ Thread, Inch - Design Standard
SAE
SAE AS39029/8A
In Force
2011-03-24
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED (FOR
MIL-C-26482 SERIES 2 AND MIL-C-81703 SERIES 3 CONNECTORS)
SAE
SAE AS5000A
In Force
2006-11-14
Fitting, Plug-in Union, Ring Locked, 24° Cone, Fluid Connection, 5080
psi, Specification for
SAE
SAE AMS4917F
In Force
2003-03-14
Titanium Alloy Sheet, Strip, and Plate 13.5V - 11Cr - 3.0Al Solution
Heat Treated
SAE
SAE
SAE AS3219B
In Force
2019-01-03
Ring, Retaining, Spiral, Minimum Distortion, Dimensional and Acceptance
Standard for
SAE
SAE
SAE
SAE
SAE
SAE AMS6396B
In Force
1992-04-01
STEEL SHEET, STRIP, AND PLATE 0.80Cr - 1.8Ni - 0.25Mo (0.49 - 0.55C) Annealed
SAE
SAE AMS4040P
In Force
2018-02-15
Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (2024-O
with 1 ½% Alclad); Annealed
SAE
SAE AS4290
In Force
2002-01-06
Validation Test Plan for AS4074 Linear Token Passing Multiplex Data Bus
SAE
SAE
SAE AS608
In Force
2002-12-16
High Pressure Compressed Gas Hose Assemblies for Aircraft and Missile
Ground Support Equipment
