Normas SAE
Filtrar:
SAE
SAE AS1738A
In Force
1990-10-01
NUT ASSEMBLY COUPLING, RIGID, FIXED CAVITY, THREADED FERRULE TYPE TUBE ENDS
SAE
SAE
SAE AS15200-4
In Force
1979-01-01
AS15200-299 Bolt, Externally Relieved Body - Double Hexagon Extended
Washer Head. HR650 .372-24 UNS-3A
SAE
SAE AMS4068B
In Force
1988-01-01
ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN 6.3Cu - 0.30Mn - 0.18Zr - 0.10V -
0.06Ti (2219-T3511) Solution Heat Treated and Stress Relieved by Stretching
SAE
SAE
SAE AS3173B
In Force
2024-09-18
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK,
AMS5643 (UNS S17400), 140 KSI, .5625-18, UNJF-3A
SAE
SAE AMS5392E
In Force
1958-01-15
ALLOY IRON CASTINGS, SAND, CORROSION RESISTANT 2.1Cr - 15Ni - 6.5Cu
SAE
SAE ARP1288B
In Force
2012-07-11
Placarding of Aircraft Hydraulic Equipment to Identify Phosphate Ester
Fluid Compatibility
SAE
SAE
SAE AS3416
In Force
2006-05-05
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, AMS 5662, .375-24UNJF-3A (STRESS
RUPTURE RESISTANT)
SAE
SAE AMS4125H
In Force
1995-11-01
ALUMINUM ALLOY DIE FORGINGS, AND ROLLED OR FORGED RINGS 0.90Si - 0.62Mg
- 0.25Cr (6151-T6) Solution and Precipitation Heat Treated
SAE
SAE AS3149
In Force
2006-05-03
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE
SHANK, AMS 4967, .3125-24 UNJF-3A
SAE
SAE
SAE AS22759/17
In Force
2008-03-25
WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED ETFE, MEDIUM WEIGHT,
SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT, 150°C
SAE
SAE
SAE AMS4902F
In Force
1995-11-01
TITANIUM SHEET, STRIP, AND PLATE Commercially-Pure Annealed 40.0 ksi
(276 MPa) Yield Strength
SAE
SAE AS39029/33B
In Force
2013-02-05
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-C-81511
SERIES 1 CONNECTORS)
SAE
SAE AMS5903A
In Force
2000-10-01
Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (SAE
30302) Cold Rolled, 1/4 Hard, 125 ksi (862 MPa) Tensile Strength
SAE
SAE AMS4313D
In Force
2010-01-05
Aluminum Alloy, Rolled or Forged Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V -
0.06Ti (2219-T351, 2219-T352) Solution Heat Treated and Mechanically
Stress Relieved
SAE
SAE
SAE
SAE AS4625C
In Force
2009-03-30
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED,
HEAVY-DUTY, 275 °F, 3000 PSI FLARELESS TITANIUM FITTINGS, INCLUDING JUMP
SIZE, STRAIGHT TO 45°
SAE
SAE AS25300-3
In Force
1987-03-01
AS25300 Ring, Sealing, Toroidal, 65I.R.H.D. Pipe Fitting, Fluorocarbon Rubber
SAE
SAE AMS5378E
In Force
2002-01-01
Alloy Castings, Investment, Corrosion and Heat Resistant 65.5Co - 25Cr -
1.8Ni - 5.0W As Cast
SAE
SAE AS33931A
In Force
2007-11-12
PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, HYDRAULIC, -65 °F
TO +275 °F
SAE
SAE AS1960/5
In Force
2013-01-02
INSTALLATION, JOINT, 40° V-BAND COUPLING AND NARROW SHEET METAL FLANGES
SAE
SAE AMS5575J
In Force
1981-10-01
STEEL TUBING, WELDED, CORROSION AND HEAT RESISTANT 18Cr - 10.5Ni -
0.70(Cb + Ta) (SAE 30347) Solution Heat Treated
SAE
SAE AS23053/5A
In Force
2018-11-05
INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, FLEXIBLE, CROSSLINKED
SAE
SAE AS3107A
In Force
2014-05-22
BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731
(UNS S66286), .1900-32 UNJF-3A
SAE
SAE
SAE
SAE
SAE
SAE ARP4285
In Force
2008-06-04
Aerospace - Evaluation of Particulate Contamination in Hydraulic Fluid -
Membrane Procedure
SAE
SAE
SAE
SAE
SAE
SAE ARP85D
In Force
1961-08-15
AIR CONDITIONING EQUIPMENT, GENERAL REQUIREMENTS FOR SUBSONIC AIRPLANES
SAE
SAE AMS4214L
In Force
2026-04-25
Castings, Aluminum Alloy Sand, 5.0Si - 1.2Cu - 0.50Mg (355.0-T71),
Solution Heat Treated and Overaged
