AENOR Logo

Normas SAE

49877 Available results

Filtrar:

(40986)
(8891)
SAE

SAE AMS6411A
In Force
1971-05-15
STEEL BARS, FORGINGS, AND TUBING 0.85Cr - 1.8Ni - 0.40Mo - 0.07V (0.28 - 0.33C) Premium Quality, Consumable Electrode Melted
SAE

SAE AMS7205C
In Force
1966-09-01
SAE

SAE AMS4915D
In Force
1977-01-15
TITANIUM ALLOY SHEET, STRIP, AND PLATE 8Al - 1V - 1Mo Single Annealed
SAE

SAE AMS3867/3B
In Force
2001-04-01
Boron Filament Tape, Epoxy-Resin-Impregnated Type B8.0-E374 (Type B0.203-E190)
SAE

SAE AMS6417H
In Force
2015-07-08
Steel, Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.38 - 0.43C) Consumable Electrode Vacuum Remelted
SAE

SAE AMS5395B
In Force
2011-08-10
SAE

SAE MAM2604A
In Force
1988-04-01
PRESSURE TESTING, AIR 275 kPa
SAE

SAE AMS5782D
In Force
2011-08-15
SAE

SAE AMS3901/7A
In Force
1992-10-01
YARN, ORGANIC FIBER (PARA-ARAMID), HIGH MODULUS OY 390 (2689)/21.5 Tensile Strength, 16.5 (114)/825 Tensile Modulus 2160 Denier, 0.6% Finish
SAE

SAE AMS5663K
In Force
2002-11-21
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution and Precipitation Heat Treated
SAE

SAE J610B_197704
In Force
1977-04-01
VALVE SEAT INSERTS–ENGINE
SAE

SAE J772A_197811
In Force
1978-11-01
CLEARANCE ENVELOPES FOR SIX- AND EIGHT-BOLT TRUCK TRANSMISSION MOUNTED POWER TAKE-OFFS
SAE

SAE AMS5813C
In Force
2003-04-24
Steel Wire, Welding, Corrosion and Moderate Heat Resistant 15cr 7.1ni 2.4mo 1al
SAE

SAE AMS7276F
In Force
1998-10-01
Rings, Sealing, Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 70 to 80
SAE

SAE AMS4438E
In Force
2006-06-21
Magnesium Alloy Castings, Sand, 5.7Zn - 1.8Th (ZH62A-T5), Precipitation Heat Treated
SAE

SAE AMS4310C
In Force
1994-06-01
If you wish to purchase this standard, please send your request to normas@aenor.com
SAE

SAE AMS4051G
In Force
2005-02-11
Aluminum Alloy, Sheet and Plate, Alclad, 6.8Zn - 2.8Mg - 2.0Cu - 0.23Cr (Alclad 7178-O), Annealed
SAE

SAE AMS5684B
In Force
1956-02-01
WELDING ELECTRODES, COATED, ALLOT, CORROSION AND HEAT RESISTANT Nickel Base - 15Cr - 9Fe - 2(Cb+Ta)
SAE

SAE AMS4935J
In Force
2009-07-15
Titanium Alloy Extrusions and Flash Welded Rings 6Al - 4V Annealed Beta Processed
SAE

SAE AMS5664D
In Force
1994-07-01
NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated, Precipitation Hardenable
SAE

SAE AMS5775A
In Force
1978-04-01
WELDING ELECTRODES, COVERED, STEEL, CORROSION AND MODERATE HEAT RESISTANT 16.5Cr - 4.5Ni - 2.9Mo - 0.10N
SAE

SAE J960_201802
In Force
2018-02-24
Marine Control Cable Connection - Engine Clutch Lever
SAE

SAE AMS5693A
In Force
1988-04-01
STEEL WIRE, CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30302) Cryogenically Produced, High Tensile Strength
SAE

SAE AMS4973A
In Force
1970-05-01
If you wish to purchase this standard, please send your request to normas@aenor.com
SAE

SAE AMS5773F
In Force
2018-06-11
SAE

SAE AMS4935C
In Force
1975-06-15
If you wish to purchase this standard, please send your request to normas@aenor.com
SAE

SAE AMS3837B
In Force
1987-07-01
CLOTH, TYPE "S" GLASS 181 Style Fabric, Finish No. HTS-904
SAE

SAE J2777_201601
In Force
2016-01-14
Recommended Best Practice for Climatic Wind Tunnel Correlation
SAE

SAE AMS6385F
In Force
2003-06-16
Steel Sheet, Strip, and Plate, Low Alloy, Heat Resistant 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.27 - 0.33C)
SAE

SAE AMS5907A
In Force
2000-11-01
Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 17Cr - 12Ni - 2.5Mo (SAE 30316) Cold Rolled, 1/4 Hard, 125 ksi (862 MPa) Tensile Strength
SAE

SAE AMS5538
In Force
1953-12-01
If you wish to purchase this standard, please send your request to normas@aenor.com
SAE

SAE AMS6370S
In Force
2025-05-03
Steel Bars, Forgings, Rings and Stock for Forging and Flash-Welded Rings 0.95Cr - 0.20Mo (0.28 - 0.33C), (SAE 4130) Aircraft Quality
SAE

SAE AMS6270C
In Force
1945-05-01
STEEL - CARBURIZING .55 Ni .5 Cr .2 Mo (.11 - .17 C)
SAE

SAE AMS5035C
In Force
2014-12-23
If you wish to purchase this standard, please send your request to normas@aenor.com
SAE

SAE AMS5735J
In Force
1974-12-15
STEEL BARS, FORGINGS, TUBING, AND RINGS, CORROSION AND HEAT RESISTANT 15Cr - 26Ni - 1.3Mo - 2.1Ti - 0.30V 1800° F (982.2° C) Solution and Precipitation Heat Treated
SAE

SAE AMS5781C
In Force
1995-05-01
STEEL WELDING ELECTRODES, COVERED, CORROSION AND MODERATE HEAT RESISTANT 15.5Cr - 4.5Ni - 2.9Mo - 0.10N
SAE

SAE AMS6267G
In Force
2007-05-15
Steel Bars, Forgings, and Tubing 1.2Cr - 3.25Ni - 0.12Mo (0.07 - 0.13C) (SAE 9310) Electroslag Remelted or Consumable Electrode Vacuum Remelted
SAE

SAE AMS5612J
In Force
2012-10-12
Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 12Cr Ferrite Controlled, Annealed
SAE

SAE AMS4041U
In Force
2025-01-22
Aluminum Alloy, Sheet and Plate, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (2024, -T3 Sheet/-T351 Plate with 1-1/2% Alclad), Solution Heat Treated, Cold Worked, and Naturally Aged
SAE

SAE AMS6277K
In Force
2025-09-25