AENOR Logo

Normas SAE

49893 Available results

Filtrar:

(41004)
(8889)
SAE

SAE J2111_202008
In Force
2020-08-01
Headlamp Cleaners
SAE

SAE J1113/1_202304
In Force
2023-04-01
Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles, Boats (up to 15 m), and Machines (Except Aircraft) (16.6 Hz to 18 GHz)
SAE

SAE AMS5802
In Force
1991-10-01
ALLOY WELDING WIRE, CORROSION AND HEAT RESISTANT 41Fe - 37.5Ni - 14Co - 4.8(Cb + Ta) - 1.5Ti Vacuum Melted, Low Expansion
SAE

SAE AMS4080K
In Force
1995-05-01
ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-0)
SAE

SAE AS5756_A1
In Force
2004-06-07
Cable, Power, Electrical, Portable General Specification for
SAE

SAE AS85049/52A_A2
In Force
1998-08-01
Connector Accessories, Electrical, Strain Relief, Nonenvironmental, Straight, Self-Locking and Non Self-Locking Category 4B (For MIL-DTL-5015 Crimp, MIL-DTL-26482 Series 2, AS81703 Series III Connectors)
SAE

SAE AS85049/123A_A2
In Force
2003-06-20
Connector Accessories, Electrical, Strain Relief, 90° Self- Locking, and Non-Self-Locking, Category 4C (for MIL-DTL-38999 Series I and II Connectors)
SAE

SAE AMS5335D
In Force
1991-10-01
STEEL CASTINGS, SAND 0.65Cr - 0.75Ni - 0.20Mo (0.25 - 0.33C) (SAE 8630 Modified) Normalized and Tempered
SAE

SAE J572_199812
In Force
1998-12-21
Requirements for Sealed Lighting Unit for Construction and Industrial Machines
SAE

SAE AMS3590D
In Force
1992-10-01
PLASTIC SHEET, COPPER FACED Paper Reinforced Phenolic Resin
SAE

SAE AMS7472J
In Force
1995-05-01
BOLTS AND SCREWS, CORROSION RESISTANT STEEL Roll Threaded
SAE

SAE AIR797D
In Force
1991-10-01
HOSE CHARACTERISTICS AND SELECTION CHART
SAE

SAE AS9697F
In Force
2026-05-27
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CORROSION- AND HEAT-RESISTANT STEEL, UNS N07001, 165 KSI MIN, .2500-28 UNJF-3A
SAE

SAE AMS5863B
In Force
1994-11-01
STEEL SHEET, STRIP, AND PLATE, CORROSION RESISTANT 15Cr - 6.5Ni - 0.75Mo - 0.6(Cb+Ta) - 1.5Cu Solution Heat Treated, Precipitation Hardenable
SAE

SAE AMS3659B
In Force
1991-10-01
POLYTETRAFLUOROETHYLENE EXTRUSIONS Premium Strength, Stress-Relieved
SAE

SAE MA2050A
In Force
2001-12-01
ELBOW, THIN WALL, 90° SWIVEL NUT, FLARELESS, METRIC
SAE

SAE AS4108/2A
In Force
2021-09-01
T-BOLT, A-286, 1000 °F BUSHING HEAD
SAE

SAE J567C_197012
In Force
1970-12-01
LAMP BULB RETENTION SYSTEM
SAE

SAE AMS5706H
In Force
1994-11-01
ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.006B - 0.05Zr Consumable Electrode or Vacuum Induction Melted 1825° - 1900°F Solution Heat Treated
SAE

SAE AMS4094C
In Force
2012-04-01
Aluminum Alloy, Sheet and Plate, Alclad 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T81 Sheet Solution Heat Treated, Cold Worked, and Precipitation Heat Treated Alclad 2219-T851 Plate Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated