Normas DIN
Filtrar:
DIN
DIN 16965-4:1982-07
In Force
1982-07-01
Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type D
pipes, dimensions
DIN
DIN 16965-1:1982-07
In Force
1982-07-01
Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type A
pipes, dimensions
DIN
DIN 16965-2:1982-07
In Force
1982-07-01
Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type B
pipes, dimensions
DIN
DIN 16965-5:1982-07
In Force
1982-07-01
Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type E
pipes, dimensions
DIN
DIN
DIN 18202:2025-09
In Force
2025-09-01
Tolerances in building construction - Buildings, design and testing /
Note: Date of issue 2025-08-01*Intended as replacement for DIN 18202 (2019-07).
DIN
DIN 19704-2:2014-11
In Force
2014-11-01
Hydraulic steel structures - Part 2: Design and manufacturing
DIN
DIN 19704-1:2014-11
In Force
2014-11-01
Hydraulic steel structures - Part 1: Criteria for design and calculation
DIN
DIN
DIN 2194:2002-08
In Force
2002-08-01
Helical springs made of round wire and rod - Cold coiled torsional
springs (leg springs) - Quality specifications
DIN
DIN 25201-4:2021-11
In Force
2021-11-01
Design guide for railway vehicles and their components - Bolted joints -
Part 4: Securing of bolted joints
DIN
DIN 25201-7:2004-06
In Force
2004-06-01
Design guide for railway vehicles and their components - Bolted joints -
Part 7: Installation / Note: To be replaced by DIN 25201-7 (2010-03).
DIN
DIN 25201-7 Berichtigung 1:2007-06
In Force
2007-06-01
Design guide for railway vehicles and their components - Bolted joints -
Part 7: Installation, Corrigenda to DIN 25201-7:2004-06
DIN
DIN 25413-1:2013-04
In Force
2013-04-01
Classification of shielding concretes by proportion of elements - Part
1: Neutron shielding
DIN
DIN
DIN 267-26:2005-12
In Force
2005-12-01
Fasteners - Technical specifications - Part 26: Conical spring washers
for bolted connections
DIN
DIN
DIN 38405-9:2011-09
In Force
2011-09-01
German standard methods for examination of water, waste water and sludge
- Anions (group D) - Part 9: Spectrometric determination of nitrate (D 9)
DIN
DIN 4708-3:1994-04
In Force
1994-04-01
Central heat-water-installations; rules for testing the efficiency of
water-heaters in dwelling houses
DIN
DIN 53438-1:1984-06
In Force
1984-06-01
Testing of combustible materials; response to ignition by a small flame;
general data
DIN
DIN 477:2021-04
In Force
2021-04-01
Gas cylinder valves for cylinder test pressures up to 300 bar - Valve
inlet and outlet connections
DIN
DIN 4753-3:2025-12
In Force
2025-12-01
Water heaters, water heating installations and storage water heaters for
drinking water - Part 3: Corrosion protection on the water side by
enamelling and cathodic protection - Requirements and testing
DIN
DIN 8588:2013-08
In Force
2013-08-01
Manufacturing processes severing - Classification, subdivision, terms
and definitions
DIN
DIN 8582:2003-09
In Force
2003-09-01
Manufacturing processes forming - Classification; Subdivision, terms and
definitions, alphabetical index
DIN
DIN 9805:2017-02
In Force
2017-02-01
Food processing machinery - Precutter and holeplates for mincers -
System Unger
DIN
DIN 46228-4:2020-03
In Force
2020-03-01
End-sleeves - Part 4: Tubular end-sleeves with plastic sleeve / Note:
DIN 46228-4 (1990-09) and DIN 46228-4 Berichtigung 1 (2015-02) remain
valid alongside this standard until 2024-03-01.
DIN
DIN 50106:2023-02
In Force
2023-02-01
Testing of metallic materials - Compression test at room temperature
DIN
DIN 51007-1:2024-08
In Force
2024-08-01
Thermal analysis (TA) - Differential thermal analysis (DTA) and
differential scanning calorimetry (DSC) - Part 1: General Principles
DIN
DIN 51452:1994-01
In Force
1994-01-01
Testing of lubricants; determination of the soot content in used Diesel
engine oils; infrared spectrometry
DIN
DIN 6857-2:2021-04
In Force
2021-04-01
Radiation protection accessories for medical use of X-radiation - Part
2: Quality control of protective clothes being in use
DIN
DIN 62136-1:2014-03
In Force
2014-03-01
Textile machinery and accessories - Needle and sinker lubricating oils
for knitting machines with independent needles - Part 1: Minimum
requirements for oils based on minerals
DIN
DIN 620-4:2004-06
In Force
2004-06-01
Rolling bearings - Rolling bearing tolerances - Part 4: Radial internal clearance
DIN
DIN
DIN
DIN 67510-1:2020-05
In Force
2020-05-01
Phosphorescent pigments and products - Part 1: Measurement and marking
at the producer
DIN
DIN 7500-2:2016-04
In Force
2016-04-01
Thread rolling screws for ISO metric thread - Part 2: Guideline values
for hole diameters
DIN
DIN EN 14078:2026-02
In Force
2026-02-01
Liquid petroleum products - Determination of fatty acid methyl ester
(FAME) content in middle distillates - Infrared spectrometry method;
German version EN 14078:2025
DIN
DIN EN 16810:2024-09
In Force
2024-09-01
Resilient, textile, laminate and modular mechanical locked floor
coverings, underlays - Environmental product declarations - Product
category rules; German and English version prEN 16810:2024 / Note: Date
of issue 2024-08-16*Intended as replacement for DIN EN 16810 (2017-08).
DIN
DIN EN 16589-2:2025-05
In Force
2025-05-01
Laboratory local exhaust devices - Articulated extraction arms - Part 2:
Commissioning and on-site testing; German and English version prEN
16589-2:2025 / Note: Date of issue 2025-03-28
DIN
DIN EN 1729-1:2025-05
In Force
2025-05-01
Furniture - Chairs and tables for educational institutions - Part 1:
Functional dimensions; German and English version prEN 1729-1:2025 /
Note: Date of issue 2025-04-11*Intended as replacement for DIN EN 1729-1
(2016-02), DIN EN 1729-1 Berichtigung 1 (2018-09).
DIN
DIN EN 1773:1997-03
In Force
1997-03-01
Textiles - Fabrics - Determination of width and length; German version
EN 1773:1996
DIN
DIN EN 17662:2021-06
In Force
2021-06-01
Execution of steel structures and aluminium structures - Environmental
Product Declarations - Product category rules complementary to EN 15804
for Steel, Iron and Aluminium structural products for use in
construction works; German and English version prEN 17662:2021 / Note:
Date of issue 2021-04-30
DIN
DIN EN 1991-1-3/NA:2019-04
In Force
2019-04-01
National Annex - Nationally determined parameters - Eurocode 1: Actions
on structures - Part 1-3: General actions - Snow loads / Note: Applies
in conjunction with DIN EN 1991-1-3 (2010-12), DIN EN 1991-1-3/A1 (2015-12).
DIN
DIN EN 18216:2025-07
In Force
2025-07-01
Digital product passport - Data exchange protocols; German and English
version prEN 18216:2025 / Note: Date of issue 2025-06-13
DIN
DIN EN 1991-1-4:2024-03
In Force
2024-03-01
Eurocode 1 - Actions on structures - Part 1-4: Wind actions; German and
English version prEN 1991-1-4:2024 / Note: Date of issue
2024-02-02*Intended as replacement for DIN EN 1991-1-4 (2010-12).
DIN
DIN EN 524-3 Berichtigung 1:2019-06
In Force
2019-06-01
Steel strip sheaths for prestressing tendons - Test methods - Part 3:
To-and-fro bending test; German version EN 524-3:1997; Corrigendum 1
DIN
DIN EN 60534-2-1 Berichtigung 1:2015-11
In Force
2015-11-01
Industrial-process control valves - Part 2-1: Flow capacity - Sizing
equations for fluid flow under installed conditions (IEC
60534-2-1:2011); German version EN 60534-2-1:2011, Corrigendum to DIN EN
60534-2-1:2012-01; (IEC-Cor.:2015 to IEC 60534-2-1:2011)
DIN
DIN 17560-1:2004-02
In Force
2004-02-01
Ferrosilicon and Silicon - Part 1: Technical delivery conditions for ferrosilicon
DIN
DIN 17560-2:2004-02
In Force
2004-02-01
Ferrosilicon and Silicon - Part 2: Technical delivery conditions for silicon
DIN
DIN 18040-3:2023-01
In Force
2023-01-01
Construction of accessible buildings - Design principles - Part 3:
Public circulation areas and open spaces / Note: Date of issue
2022-12-02*Intended as replacement for DIN 18040-3 (2014-12).
DIN
DIN 18014:2023-06
In Force
2023-06-01
Earthing systems for buildings - Planning, execution and documentation /
Note: DIN 18014 (2014-03) remains valid alongside this standard until 2024-06-01.
DIN
DIN 3535-6:2019-04
In Force
2019-04-01
Gaskets for gas supply - Part 6: Gasket material based on fibres,
graphite or polytetrafluoroethylene (PTFE) for gas valves, gas
appliances and gas mains / Note: This standard is part of the DVGW body
of rules.
DIN
DIN 43673-1:1982-02
In Force
1982-02-01
Drilled holes and screw connections for busbars; Rectangular cross
section busbars
DIN
DIN
DIN 6120:2019-03
In Force
2019-03-01
Marking of packaging and packaging materials - Plastics packaging and
packaging materials
DIN
DIN 55473:2021-07
In Force
2021-07-01
Auxiliary means of packaging - Desiccant in bag - Technical delivery conditions
DIN
DIN
DIN 13-20:2000-08
In Force
2000-08-01
ISO general purpose metric screw threads - Part 20: Limits of sizes for
coarse pitch threads with the prefered tolerance classes; nominal sizes
from 1 mm to 68 mm
DIN
DIN 13-21:2005-08
In Force
2005-08-01
ISO general purpose metric screw threads - Part 21: Limits of sizes for
fine pitch threads with the preferred tolerance classes; Nominal
diameter from 1 mm to 24,5 mm
DIN
DIN 13-23:2005-08
In Force
2005-08-01
ISO general purpose metric screw threads - Part 23: Limits of sizes for
fine pitch threads with the prefered tolerance classes; Nominal diameter
from 53 mm to 110 mm
