Normas DIN
Filtrar:
DIN
DIN ISO 5130:2020-11
In Force
2020-11-01
Acoustics - Measurements of sound pressure level emitted by stationary
road vehicles (ISO 5130:2019)
DIN
DIN 46228-4:2020-03
In Force
2020-03-01
End-sleeves - Part 4: Tubular end-sleeves with plastic sleeve / Note:
DIN 46228-4 (1990-09) and DIN 46228-4 Berichtigung 1 (2015-02) remain
valid alongside this standard until 2024-03-01.
DIN
DIN EN 15312:2025-02
In Force
2025-02-01
Free access multi-sports equipment - Safety requirements and test
methods; German and English version prEN 15312:2025 / Note: Date of
issue 2025-01-10*Intended as replacement for DIN EN 15312 (2010-12).
DIN
DIN EN 14078:2026-02
In Force
2026-02-01
Liquid petroleum products - Determination of fatty acid methyl ester
(FAME) content in middle distillates - Infrared spectrometry method;
German version EN 14078:2025
DIN
DIN 8588:2013-08
In Force
2013-08-01
Manufacturing processes severing - Classification, subdivision, terms
and definitions
DIN
DIN 8582:2003-09
In Force
2003-09-01
Manufacturing processes forming - Classification; Subdivision, terms and
definitions, alphabetical index
DIN
DIN EN 1993-1-1/NA:2022-10
In Force
2026-04-01
National Annex - Nationally determined parameters - Eurocode 3: Design
of steel structures - Part 1-1: General rules and rules for buildings /
Note: Applies in conjunction with DIN EN 1993-1-1 (2010-12), DIN EN
1993-1-1/A1 (2014-07).
DIN
DIN EN 1993-1-5/NA:2018-11
In Force
2026-04-01
National Annex - Nationally determined parameters - Eurocode 3: Design
of steel structures - Part 1-5: Plated structural elements / Note:
Applies in conjunction with DIN EN 1993-1-5 (2017-07).
DIN
DIN EN 1990/NA:2010-12
In Force
2010-12-01
National Annex - Nationally determined parameters - Eurocode: Basis of
structural design / Note: Applies in conjunction with DIN EN 1990
(2010-12).*To be amended by DIN EN 1990/NA/A1 (2011-07).
DIN
DIN EN 1991-1-9:2023-03
In Force
2023-03-01
Eurocode 1: Actions on structures - Part 1-9: General actions -
Atmospheric icing; German and English version prEN 1991-1-9:2023 / Note:
Date of issue 2023-02-17
DIN
DIN EN ISO 8062-3:2023-05
In Force
2023-05-01
Geometrical product specifications (GPS) - Dimensional and geometrical
tolerances for moulded parts - Part 3: General dimensional and
geometrical tolerances and machining allowances for castings using ±
tolerances for indicated dimensions (ISO 8062-3:2023); German version EN
ISO 8062-3:2023
DIN
DIN 53438-1:1984-06
In Force
1984-06-01
Testing of combustible materials; response to ignition by a small flame;
general data
DIN
DIN EN 18120-7:2024-11
In Force
2024-11-01
Packaging - Design for recycling of plastic packaging - Part 7:
Guideline for PE and PP flexible packaging; German and English version
prEN 18120-7:2024 / Note: Date of issue 2024-10-18
DIN
DIN EN 18120-6:2024-11
In Force
2024-11-01
Packaging - Design for recycling for plastic packaging - Part 6:
Guideline for PE and PP rigid packaging; German and English version prEN
18120-6:2024 / Note: Date of issue 2024-10-18
DIN
DIN EN ISO 21920-2:2022-12
In Force
2022-12-01
Geometrical product specifications (GPS) - Surface texture: Profile -
Part 2: Terms, definitions and surface texture parameters (ISO
21920-2:2021, Corrected version 2022-06); German version EN ISO 21920-2:2022
DIN
DIN 7500-2:2016-04
In Force
2016-04-01
Thread rolling screws for ISO metric thread - Part 2: Guideline values
for hole diameters
DIN
DIN EN 15947-3:2022-12
In Force
2022-12-01
Pyrotechnic articles - Fireworks, Categories F1, F2, and F3 - Part 3:
Minimum labelling requirements; German version EN 15947-3:2022
DIN
DIN EN 1610 Berichtigung 1:2016-09
In Force
2016-09-01
Construction and testing of drains and sewers; German version EN
1610:2015, Corrigendum to DIN EN 1610:2015-12
DIN
DIN EN 16256-2:2012-12
In Force
2012-12-01
Pyrotechnic articles - Theatrical pyrotechnic articles - Part 2:
Categories of theatrical pyrotechnic articles; German version EN 16256-2:2012
DIN
DIN 6857-2:2021-04
In Force
2021-04-01
Radiation protection accessories for medical use of X-radiation - Part
2: Quality control of protective clothes being in use
DIN
DIN
DIN EN ISO 105-C06:2010-08
In Force
2010-08-01
Textiles - Tests for colour fastness - Part C06: Colour fastness to
domestic and commercial laundering (ISO 105-C06:2010); German version EN
ISO 105-C06:2010
DIN
DIN 62136-1:2014-03
In Force
2014-03-01
Textile machinery and accessories - Needle and sinker lubricating oils
for knitting machines with independent needles - Part 1: Minimum
requirements for oils based on minerals
DIN
DIN 620-4:2004-06
In Force
2004-06-01
Rolling bearings - Rolling bearing tolerances - Part 4: Radial internal clearance
DIN
DIN
DIN 67510-1:2020-05
In Force
2020-05-01
Phosphorescent pigments and products - Part 1: Measurement and marking
at the producer
DIN
DIN EN 1993-1-8/NA:2020-11
In Force
2026-04-01
National Annex - Nationally determined parameters - Eurocode 3: Design
of steel structures - Part 1-8: Design of joints / Note: Applies in
conjunction with DIN EN 1993-1-8 (2010-12).
DIN
DIN 51007-1:2024-08
In Force
2024-08-01
Thermal analysis (TA) - Differential thermal analysis (DTA) and
differential scanning calorimetry (DSC) - Part 1: General Principles
DIN
DIN 51452:1994-01
In Force
1994-01-01
Testing of lubricants; determination of the soot content in used Diesel
engine oils; infrared spectrometry
DIN
DIN 4753-3:2025-12
In Force
2025-12-01
Water heaters, water heating installations and storage water heaters for
drinking water - Part 3: Corrosion protection on the water side by
enamelling and cathodic protection - Requirements and testing
DIN
DIN 4708-3:1994-04
In Force
1994-04-01
Central heat-water-installations; rules for testing the efficiency of
water-heaters in dwelling houses
DIN
DIN 9805:2017-02
In Force
2017-02-01
Food processing machinery - Precutter and holeplates for mincers -
System Unger
DIN
DIN ISO 48-4:2021-02
In Force
2021-02-01
Rubber, vulcanized or thermoplastic - Determination of hardness - Part
4: Indentation hardness by durometer method (Shore hardness) (ISO 48-4:2018)
DIN
DIN 16086:2006-01
In Force
2006-01-01
Electrical pressure measuring instruments - Pressure transmitters,
pressure measuring instruments - Concepts, specifications on data sheets
DIN
DIN
DIN 18065:2020-08
In Force
2020-08-01
Stairs in buildings - Terminology, measuring rules, main dimensions
DIN
DIN 30630:2008-03
In Force
2008-03-01
Technical drawings - General tolerances in mechanical engineering -
Tolerance rule and general plan
DIN
DIN 33821:2009-03
In Force
2009-03-01
Safety relief valves for gas transmission and distribution installations
operating at working pressures up to 100 bar
DIN
DIN 376:2016-02
In Force
2016-02-01
Machine screwing taps for coarse pitch metric ISO-threads M1,6 to M68
DIN
DIN 3964:1980-11
In Force
1980-11-01
Deviations of Shaft Centre Distances and Shaft Position Tolerances of
Casings for Cylindrical Gears
DIN
DIN 3967:1978-08
In Force
1978-08-01
System of Gear Fits; Backlash, Tooth Thickness Allowances, Tooth
Thickness Tolerances; Principles
DIN
DIN 52295:2010-03
In Force
2010-03-01
Testing of glass - Pendulum impact test on containers - Testing by
attributes and by variables
DIN
DIN 51604-2:2020-02
In Force
2020-02-01
FAM-testing fluid for polymer materials - Composition and requirements -
Part 2: Testing Fluid B, containing methanol
DIN
DIN 53497:2017-04
In Force
2017-04-01
Testing of plastics - Hot storage test on mouldings made of
thermoplastic moulding materials without external mechanical stressing
DIN
DIN 53892-2:2025-06
In Force
2025-06-01
Testing of textiles - Part 2: Determination of dimensional change of
heavy fabrics subjected to the repeated attack of moisture and dry air
DIN
DIN 8061:2016-05
In Force
2016-05-01
Unplasticized polyvinyl chloride (PVC-U) pipes - General quality
requirements, testing; Text in German and English
DIN
DIN 86282:2017-05
In Force
2017-05-01
Ships and marine technology - Sewage system - Flanges for international
discharge connections
DIN
DIN EN 10095:2018-12
In Force
2018-12-01
Heat resisting steels and nickel alloys; German version EN 10095:1999
DIN
DIN EN 12693:2023-05
In Force
2023-05-01
Refrigerating systems and heat pumps - Safety and environmental
requirements - Positive displacement refrigerant compressors; German and
English version prEN 12693:2023 / Note: Date of issue
2023-03-31*Intended as replacement for DIN EN 12693 (2008-09).
DIN
DIN EN 17700-5:2025-03
In Force
2025-03-01
Plant biostimulants - Claims - Part 5: Determination of availability of
confined nutrients in the soil or rhizosphere; German version EN 17700-5:2024
DIN
DIN EN 17700-1:2025-03
In Force
2025-03-01
Plant biostimulants - Claims - Part 1: General principles; German
version EN 17700-1:2024
DIN
DIN EN 4179:2026-04
In Force
2026-04-01
Aerospace series - Qualification and approval of personnel for
nondestructive testing; German and English version EN 4179:2026
DIN
DIN EN ISO 1043-2:2012-03
In Force
2012-03-01
Plastics - Symbols and abbreviated terms - Part 2: Fillers and
reinforcing materials (ISO 1043-2:2011); German version EN ISO 1043-2:2011
DIN
DIN EN ISO 1043-1:2016-09
In Force
2016-09-01
Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and
their special characteristics (ISO 1043-1:2011 + Amd.1:2016); German
version EN ISO 1043-1:2011 + A1:2016
DIN
DIN EN 993-5:2019-03
In Force
2026-04-01
Methods of test for dense shaped refractory products - Part 5:
Determination of cold crushing strength; German version EN 993-5:2018
DIN
DIN EN ISO 14001:2026-03
In Force
2026-03-01
Environmental management systems - Requirements with guidance for use
(ISO/FDIS 14001:2026); German and English version prEN ISO 14001:2026 /
Note: Date of issue 2026-02-06*Intended as replacement for DIN EN ISO
14001 (2015-11), DIN EN ISO 14001 Berichtigung 1 (2016-03), DIN EN ISO
14001/A1 (2024-11).
DIN
DIN EN ISO 14405-1:2024-06
In Force
2026-05-01
Geometrical product specifications (GPS) - Dimensional tolerancing -
Part 1: Linear sizes (ISO/DIS 14405-1:2024); German and English version
prEN ISO 14405-1:2024 / Note: Date of issue 2024-04-26
DIN
DIN EN ISO 15223-1/ A1:2024-06
In Force
2024-06-01
Medical devices - Symbols to be used with information to be supplied by
the manufacturer - Part 1: General requirements - Amendment 1 (ISO
15223-1:2021/DAM 1:2024); German and English version EN ISO
15223-1:2021/prA1:2024 / Note: Date of issue 2024-05-10*Intended as an
amendment to DIN EN ISO 15223-1 (2022-02).
DIN
DIN EN ISO 15083:2023-03
In Force
2023-03-01
Small craft - Bilge-pumping systems (ISO 15083:2020 + Amd 1:2022);
German version EN ISO 15083:2020 + A1:2022
DIN
DIN EN ISO 15083/A11:2023-07
In Force
2023-07-01
Small craft - Bilge-pumping systems (ISO 15083:2020); German version EN
ISO 15083:2020/A11:2023
