Normas DIN
Filtrar:
DIN
DIN 8374:2006-11
In Force
2006-11-01
Subland twist drills with parallel shank for clearance holes and
countersinks for countersunk head screws
DIN
DIN 4420-3:2006-01
In Force
2006-01-01
Service and working scaffolds - Part 3: Selected types of scaffolding
constructions and their basic versions
DIN
DIN 51851:1980-04
In Force
1980-04-01
Testing of gaseous fuels and other gases; calculation of reduced gas volume
DIN
DIN ISO 603-10:2000-05
In Force
2000-05-01
Bonded abrasives products - Dimensions - Part 10: Stones for honing and
superfinishings (ISO 603-10:1999)
DIN
DIN
DIN
DIN 17052-1:2013-09
In Force
2013-09-01
Heat treatment furnaces - Part 1: Requirements for temperature uniformity
DIN
DIN 30730:2016-02
In Force
2016-02-01
Mobile waste packer - Multi-bucket system vehicles and roller contact
tipper vehicles - Requirements, connection dimensions
DIN
DIN ISO 16938-2:2020-12
In Force
2020-12-01
Buildings and civil engineering works - Determination of the staining of
porous substrates by sealants used in joints - Part 2: Test without
compression (ISO 16938-2:2019)
DIN
DIN 8589-11:2003-09
In Force
2003-09-01
Manufacturing processes chip removal - Part 11: Grinding with rotating
tool; Classification, subdivision, terms and definitions
DIN
DIN ISO 10816-6:2015-07
In Force
2015-07-01
Mechanical vibration - Evaluation of machine vibration by measurements
on non-rotating parts - Part 6: Reciprocating machines with power
ratings above 100 kW (ISO 10816-6:1995 + Amd.1:2015)
DIN
DIN 13094-3:2019-03
In Force
2019-03-01
Lead and cadmium in metallic items in contact with the body - Part 3:
Measurement by optical emission spectrometry in inductive coupled plasma
(ICP OES) after acidic extraction
DIN
DIN
DIN 15233:1980-04
In Force
1980-04-01
Continuous mechanical handling equipment; bucket elevators, medium deep buckets
DIN
DIN 13086:2005-08
In Force
2005-08-01
External introducer cannulae for suprapubic catheter systems for single
use - Requirements and testing
DIN
DIN 8584-7:2003-09
In Force
2003-09-01
Manufacturing processes forming under combination of tensile and
compressive conditions - Part 7: Hydroforming widening; Classification,
subdivision, terms and definitions
DIN
DIN ISO 10583:1998-04
In Force
1998-04-01
Aerospace fluid systems - Test methods for tube/fitting assemblies (ISO 10583:1993)
DIN
DIN 21164:2015-08
In Force
2015-08-01
Shaft sinking - Riders for winding kibbles - Safety requirements and
testing / Note: DIN 21164 (2003-05) remains valid alongside this
standard until 2016-01-31.
DIN
DIN ISO 6773:1996-01
In Force
1996-01-01
Aerospace - Fluid systems - Thermal shock testing of piping and fittings
(ISO 6773:1994)
DIN
DIN
DIN 9831-2:2013-01
In Force
2013-01-01
Tools for pressing - Guide bushes for press tool sets - Part 2: Type AW,
Type BW and Type CW, ball cage bushes
DIN
DIN 2413:2020-04
In Force
2020-04-01
Seamless steel tubes for oil- and water-hydraulic systems - Calculation
rules for pipes and elbows for dynamic loads
DIN
DIN ISO 13926-2:2018-07
In Force
2018-07-01
Pen systems - Part 2: Plunger stoppers for pen-injectors for medical use
(ISO 13926-2:2017)
DIN
DIN 43627:2018-12
In Force
2018-12-01
House connection boxes for underground services for HRC-fuses size 00 up
to 100 A, 500 V and size 1 up to 250 A, 500 V
DIN
DIN ISO 20712-2:2008-08
In Force
2008-08-01
Water safety signs and beach safety flags - Part 2: Specifications for
beach safety flags - Colour, shape, meaning and performance (ISO 20712-2:2007)
DIN
DIN 85004-2:2006-03
In Force
2006-03-01
Pipelines of copper-nickel-alloys - Part 2: Basic principles for design
and fabrication, testing
DIN
DIN
DIN 58727-2:1986-04
In Force
1986-04-01
Produktion in optical engineering: surfacing pins with spherical
cemented metal carbide point
DIN
DIN
DIN
DIN 8593-7:2003-09
In Force
2003-09-01
Manufacturing processes joining - Part 7: Joining by soldering or
brazing; Classification, subdivision, terms and definitions
DIN
DIN 802-6:2003-07
In Force
2003-07-01
Manufacturing to tolerances on the threaded portion of screwing taps -
Part 6: Ground taps for tapped holes (EG) for wire thread inserts as in
DIN 8140 for ISO metric coarse and fine pitch threads
DIN
DIN ISO 1012:2000-04
In Force
2000-04-01
Photography - Film in sheets and rolls for general use - Dimensions (ISO 1012:1998)
DIN
DIN ISO/TS 12913-2:2020-11
In Force
2020-11-01
Acoustics - Soundscape - Part 2: Data collection and reporting
requirements (ISO/TS 12913-2:2018)
DIN
DIN 65349:2001-06
In Force
2001-06-01
Aerospace - Testing of locking torques for nuts and related threaded
parts, with metric screw thread - Test methods
DIN
DIN
DIN 1319-2:2005-10
In Force
2005-10-01
Fundamentals of metrology - Part 2: Terminology related to measuring equipment
DIN
DIN 65153:1997-06
In Force
1997-06-01
Aerospace - Acceptance testing of plasma arc welding equipment
DIN
DIN ISO 1219-2:2019-01
In Force
2019-01-01
Fluid power systems and components - Graphic symbols and circuit
diagrams - Part 2: Circuit diagrams (ISO 1219-2:2012); Text in German,
English and French
DIN
DIN 38409-41:1980-12
In Force
1980-12-01
German Standard Methods for Examination of Water, Waste Water and
Sludge; Summary Action and Material Characteristic Parameters (Group H);
Determination of the Chemical Oxygen Demand (COD) in the Range over 15
mg/l (H41)
DIN
DIN
DIN
DIN 58747-1:2015-09
In Force
2015-09-01
Production in optical engineering - ultrasonic cleaning machines - Part
1: Areas for cleaning tanks
DIN
DIN 18873-11:2013-04
In Force
2013-04-01
Methods for measuring of the energy use from equipment for commercial
kitchens - Part 11: Beverage cooler
DIN
DIN
DIN 65530:2006-01
In Force
2006-01-01
Aerospace - Nuts, bihexagonal with flange and MJ thread, deep
counterbore, self-locking, corrosion-resisting steel, classification:
1550 MPa/315 °C/425 °C
DIN
DIN ISO 7736:1985-04
In Force
1985-04-01
Road vehicles; car radio for front installation; installation space
including connection
DIN
DIN 4102-11:1985-12
In Force
1985-12-01
Fire behaviour of building materials and building components; pipe
encasements, pipe bushings, service shafts and ducts, and barriers
across inspection openings; terminology, requirements and testing
DIN
DIN ISO 7627-5:1991-07
In Force
1991-07-01
Hardmetals; chemical analysis by flame atomic absorption spectrometry;
determination of cobalt, iron, manganese, molybdenum, nickel, titanium
and vanadium in contents from 0,5 to 2 % (m/m); identical with ISO 7627-5:1983
DIN
DIN 19004:1980-08
In Force
1980-08-01
Screw threads of shutter cable release; tip and socket, connecting dimensions
DIN
DIN
DIN ISO 7368:2018-09
In Force
2018-09-01
Hydraulic fluid power - Two-port slip-in cartridge valves - Cavities
(ISO 7368:2016)
DIN
DIN ISO 12844:2006-11
In Force
2006-11-01
Raw optical glass - Grindability with diamond pellets - Test method and
classification (ISO 12844:1999)
DIN
DIN 6870-2:2012-11
In Force
2012-11-01
Quality management system in medical radiology - Part 2: Radiological
diagnosis and intervention / Note: Applies in conjunction with DIN
6870-100 (2012-11).
DIN
DIN 18381:2019-09
In Force
2019-09-01
German construction contract procedures (VOB) - Part C: General
technical specifications in construction contracts (ATV) - Installation
of gas, water and drainage pipework inside buildings
DIN
DIN 3853:2001-09
In Force
2001-09-01
Non-soldering and soldering compression fittings - Stud ends for use
with union nut; Design sheet
DIN
DIN
DIN ISO 10007:2020-10
In Force
2020-10-01
Quality management - Guidelines for configuration management (ISO 10007:2017)
DIN
DIN ISO 19202-2:2018-02
In Force
2018-02-01
Summer toboggan runs - Part 2: Safety requirements for operation (ISO 19202-2:2017)
DIN
DIN 19901:2012-12
In Force
2012-12-01
Installations for separation for light liquids and greases -
Verification of structural stability and steadiness
