Normas DIN
Filtrar:
DIN
DIN EN 1114-3:2020-01
In Force
2020-01-01
Plastics and rubber machines - Extruders and extrusion lines - Part 3:
Safety requirements for haul-offs; German version EN 1114-3:2019
DIN
DIN EN ISO 24802-2:2014-08
In Force
2014-08-01
Recreational diving services - Requirements for the training of scuba
instructors - Part 2: Level 2 (ISO 24802-2:2014); German version EN ISO 24802-2:2014
DIN
DIN EN 3660-035:2017-11
In Force
2017-11-01
Aerospace series - Cable outlet accessories for circular and rectangular
electrical and optical connectors - Part 035: Cable outlet, style K,
90°, for heat shrinkable boot, shielded, sealed - Product standard;
German and English version EN 3660-035:2017
DIN
DIN EN 16803-1:2021-07
In Force
2021-07-01
Space - Use of GNSS-based positioning for road Intelligent Transport
Systems (ITS) - Part 1: Definitions and system engineering procedures
for the establishment and assessment of performances; German version EN 16803-1:2020
DIN
DIN 41756-2:1973-05
In Force
1973-05-01
Static power convertors; duty of power convertors, typers of d.c. load
DIN
DIN EN 15273-2:2017-10
In Force
2017-10-01
Railway applications - Gauges - Part 2: Rolling stock gauge; German
version EN 15273-2:2013+A1:2016 / Note: To be replaced by DIN EN 15273-2
(2018-11), DIN EN 15273-2 (2023-04).
DIN
DIN EN 62047-18:2014-04
In Force
2014-04-01
Semiconductor devices - Micro-electromechanical devices - Part 18: Bend
testing methods of thin film materials (IEC 62047-18:2013); German
version EN 62047-18:2013
DIN
DIN EN ISO 26800:2011-11
In Force
2011-11-01
Ergonomics - General approach, principles and concepts (ISO 26800:2011);
German version EN ISO 26800:2011
DIN
DIN EN 2036:2017-10
In Force
2017-10-01
Aerospace series - Round steel bars ground - Dimensions - Tolerance h 8;
German and English version EN 2036:2017
DIN
DIN EN 16714-2:2016-11
In Force
2016-11-01
Non-destructive testing - Thermographic testing - Part 2: Equipment;
German version EN 16714-2:2016
DIN
DIN EN 13791:2020-02
In Force
2020-02-01
Assessment of in-situ compressive strength in structures and precast
concrete components; German version EN 13791:2019 / Note: To be amended
by DIN EN 13791/A20 (2021-09).
DIN
DIN EN 16941-2:2021-11
In Force
2021-11-01
On-site non-potable water systems - Part 2: Systems for the use of
treated greywater; German version EN 16941-2:2021
DIN
DIN EN 3086:2019-08
In Force
2019-08-01
Aerospace series - Hose assemblies - Designation limited to 15 digits;
German and English version EN 3086:2019
DIN
DIN EN 15072:2013-08
In Force
2013-08-01
Chemicals used for treatment of swimming pool water - Sodium
dichloroisocyanurate, anhydrous; German version EN 15072:2013 / Note: To
be replaced by DIN EN 15072 (2020-07).
DIN
DIN EN 17271:2019-09
In Force
2019-09-01
Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of
the peel strength of profiles laminated with foils; German version EN 17271:2019
DIN
DIN EN ISO 16122-1:2018-09
In Force
2026-05-01
Agricultural and forestry machinery - Inspection of sprayers in use -
Part 1: General (ISO 16122-1:2015); German version EN ISO 16122-1:2015
DIN
DIN EN 319522-4-3:2018-12
In Force
2018-12-01
Electronic Signatures and Infrastructures (ESI) - Electronic Registered
Delivery Services - Part 4: Bindings - Sub-part 3:
Capability/requirements bindings (Endorsement of the English version EN
319 522-4-3 V1.1.1 (2018-09) as a German standard) / Note: DIN ETS
standards collection*Endorsement notice
DIN
DIN EN 17214:2019-10
In Force
2019-10-01
Visual assessment of furniture surfaces; German version EN 17214:2019
DIN
DIN EN 609-1:2017-04
In Force
2017-04-01
Agricultural and forestry machinery - Safety of log splitters - Part 1:
Wedge splitters; German version EN 609-1:2017
DIN
DIN EN 13227:2017-12
In Force
2017-12-01
Wood flooring - Solid lamparquet products; German version EN 13227:2017
DIN
DIN EN 17272:2020-06
In Force
2020-06-01
Chemical disinfectants and antiseptics - Methods of airborne room
disinfection by automated process - Determination of bactericidal,
mycobactericidal, sporicidal, fungicidal, yeasticidal, virucidal and
phagocidal activities; German version EN 17272:2020 / Note: To be
amended by DIN EN 17272/A1 (2023-12).
DIN
DIN EN 1559-5:2017-05
In Force
2017-05-01
Founding - Technical conditions of delivery - Part 5: Additional
requirements for magnesium alloy castings; German version EN 1559-5:2017
DIN
DIN EN 12390-10:2019-08
In Force
2019-08-01
Testing hardened concrete - Part 10: Determination of the carbonation
resistance of concrete at atmospheric levels of carbon dioxide; German
version EN 12390-10:2018
DIN
DIN EN 61069-3:2017-07
In Force
2017-07-01
Industrial-process measurement, control and automation - Evaluation of
system properties for the purpose of system assessment - Part 3:
Assessment of system functionality (IEC 61069-3:2016); German version EN
61069-3:2016 / Note: DIN EN 61069-3 (1997-03) remains valid alongside
this standard until 2019-10-28.
DIN
DIN EN 12697-55:2020-02
In Force
2020-02-01
Bituminous mixtures - Test methods - Part 55: Organoleptic assessment of
mixtures with bitumen emulsion; German version EN 12697-55:2019
DIN
DIN EN 61303 Berichtigung 1:2017-03
In Force
2017-03-01
Medical electrical equipment - Radionuclide calibrators - Particular
methods for describing performance (IEC 61303:1994); German version EN
61303:1995, Corrigendum to DIN EN 61303:1996-03, (IEC
61303:1994/COR1:2016); German version EN 61303:1995/AC:2016
DIN
DIN EN 490:2017-04
In Force
2017-04-01
Concrete roofing tiles and fittings for roof covering and wall cladding
- Product specifications; German version EN 490:2011+A1:2017
DIN
DIN EN 14012:2020-06
In Force
2020-06-01
Postal services - Quality of service - Complaints handling principles;
German version EN 14012:2019
DIN
DIN EN ISO 22442-1:2021-08
In Force
2021-08-01
Medical devices utilizing animal tissues and their derivatives - Part 1:
Application of risk management (ISO 22442-1:2020); German version EN ISO
22442-1:2020 / Note: Applies in conjunction with DIN EN ISO 14971 (2020-07).
DIN
DIN 46230:1980-03
In Force
1980-03-01
Terminal ends for solderless connections; pin type, without insulating
sleeve, for copper conductors
DIN
DIN EN 302065-3:2017-02
In Force
2017-02-01
Short Range Devices (SRD) using Ultra Wide Band technology (UWB) -
Harmonised Standard covering the essential requirements of article 3.2
of the Directive 2014/53/EU - Part 3: Requirements for UWB devices for
ground based vehicular applications (Endorsement of the English version
EN 302 065-3 V2.1.1 (2016-11) as German standard) / Note: DIN ETS
standards collection*Endorsement notice
DIN
DIN EN 10210-2:2019-07
In Force
2019-07-01
Hot finished steel structural hollow sections - Part 2: Tolerances,
dimensions and sectional properties; German version EN 10210-2:2019
DIN
DIN EN ISO 4126-1:2016-12
In Force
2016-12-01
Safety devices for protection against excessive pressure - Part 1:
Safety valves (ISO 4126-1:2013 + Amd 1:2016); German version EN ISO
4126-1:2013 + A1:2016
DIN
DIN EN 12927:2019-08
In Force
2019-08-01
Safety requirements for cableway installations designed to carry persons
- Ropes; German version EN 12927:2019
DIN
DIN EN 3745-517:2017-06
In Force
2017-06-01
Aerospace series - Fibres and cables, optical, aircraft use - Test
methods - Part 517: Cable tie clamping test; German and English version
EN 3745-517:2017
DIN
DIN EN 12873-3:2019-05
In Force
2019-05-01
Influence of materials on water intended for human consumption -
Influence due to migration - Part 3: Test method for ion exchange and
adsorbent resins; German version EN 12873-3:2019 / Note: This standard
is part of the DVGW body of rules.
DIN
DIN EN 14243-2:2019-05
In Force
2019-05-01
Materials obtained from end of life tyres - Part 2: Granulates and
powders - Methods for determining the particle size distributions and
impurities, including free steel and free textile content; German
version EN 14243-2:2019
DIN
DIN EN 10219-3:2020-11
In Force
2020-11-01
Cold formed welded steel structural hollow sections - Part 3: Technical
delivery conditions for high strength and weather resistant steels;
German version EN 10219-3:2020
DIN
DIN EN 1306:2018-05
In Force
2018-05-01
Inland navigation vessels - Connections for the discharge of waste
water; German version EN 1306:2018
DIN
DIN EN ISO 945-1:2019-10
In Force
2019-10-01
Microstructure of cast irons - Part 1: Graphite classification by visual
analysis (ISO 945-1:2019); German version EN ISO 945-1:2019
DIN
DIN EN 16594:2015-01
In Force
2015-01-01
Packaging - Rigid plastic containers - PET finish 26/22 (12,0); German
version EN 16594:2014
DIN
DIN EN 16477-1:2017-07
In Force
2017-07-01
Glass in building - Painted glass for internal use - Part 1:
Requirements; German version EN 16477-1:2016
DIN
DIN EN 13523-6:2020-08
In Force
2020-08-01
Coil coated metals - Test methods - Part 6: Adhesion after indentation
(cupping test); German version EN 13523-6:2020
DIN
DIN EN 60317-67:2017-11
In Force
2017-11-01
Specifications for particular types of winding wires - Part 67:
Polyvinyl acetal enamelled rectangular aluminium wire, class 105 (IEC
60317-67:2017); German version EN 60317-67:2017
DIN
DIN V 55391:2003-06
In Force
2003-06-01
Arrangements for the recognition and acceptance of conformity assessment
results (ISO/IEC Guide 68:2002)
DIN
DIN EN 416:2020-04
In Force
2020-04-01
Gas-fired overhead radiant tube heaters and radiant tube heater systems
for non-domestic use - Safety and energy efficiency; German version EN
416:2019 / Note: This standard is part of the DVGW body of rules.
DIN
DIN EN 17279:2020-03
In Force
2020-03-01
Foodstuffs - Multimethod for the screening of aflatoxin B1,
deoxynivalenol, fumonisin B1 and B2, ochratoxin A, T-2 toxin, HT-2 toxin
and zearalenone in foodstuffs, excluding foods for infants and young
children, by LC-MS/MS; German version EN 17279:2019
DIN
DIN EN 2053:2017-10
In Force
2017-10-01
Aerospace series - U-section aluminium alloy folded profiles -
Dimensions; German and English version EN 2053:2017
DIN
DIN 53529-1:1983-03
In Force
1983-03-01
Testing of rubber and elastomers; measurement of vulcanization
characteristics (curometry); general working principles
DIN
DIN EN 16125:2019-12
In Force
2019-12-01
LPG Equipment and Accessories - Pipework systems and supports - LPG in
liquid phase and vapour pressure phase; German version EN 16125:2019
DIN
DIN EN ISO 9241-306:2018-12
In Force
2018-12-01
Ergonomics of human-system interaction - Part 306: Field assessment
methods for electronic visual displays (ISO 9241-306:2018); German
version EN ISO 9241-306:2018
DIN
DIN EN 12641-1:2020-05
In Force
2020-05-01
Intermodal loading units and commercial vehicles - Tarpaulins - Part 1:
Minimum requirements, German version EN 12641-1:2019
DIN
DIN EN 13756:2019-04
In Force
2019-04-01
Wood flooring and parquet - Terminology; Trilingual version EN 13756:2018
DIN
DIN EN 302637-2:2019-07
In Force
2019-07-01
Intelligent Transport Systems (ITS) - Vehicular Communications - Basic
Set of Applications - Part 2: Specification of Cooperative Awareness
Basic Service (Endorsement of the English version EN 302 637-2 V1.4.1
(2019-04) as a German standard) / Note: DIN ETS standards
collection*Endorsement notice
DIN
DIN EN 12270:2014-03
In Force
2014-03-01
Mountaineering equipment - Chocks - Safety requirements and test
methods; German version EN 12270:2013
DIN
DIN EN 13108-31:2019-12
In Force
2019-12-01
Bituminous mixtures - Material specifications - Part 31: Asphalt
Concrete with Bituminous Emulsion; German version EN 13108-31:2019
DIN
DIN EN 60191-4:2019-02
In Force
2019-02-01
Mechanical standardization of semiconductor devices - Part 4: Coding
system and classification into forms of package outlines for
semiconductor device packages (IEC 60191-4:2013 + A1:2018); German
version EN 60191-4:2014 + A1:2018 / Note: DIN EN 60191-4 (2014-10)
remains valid alongside this standard until 2021-05-01.
DIN
DIN 1417-6:1970-08
In Force
1970-08-01
Broaching tools; rectangular end pieces S (for internal splines)
DIN
DIN EN 305200-2-2:2018-12
In Force
2018-12-01
Access, Terminals, Transmission and Multiplexing (ATTM) - Energy
management - Operational infrastructures - Global KPIs - Part 2:
Specific requirements - Sub-part 2: Fixed broadband access networks
(Endorsement of the English version EN 305 200-2-2 V1.2.1 (2018-08) as a
German standard) / Note: DIN ETS standards collection*Endorsement notice
DIN
