Normas DIN
Filtrar:
DIN
DIN EN 1883:2018-05
In Force
2018-05-01
Feather and down - Sampling in view of tests; German version EN 1883:2018
DIN
DIN EN 3475-604:2018-03
In Force
2018-03-01
Aerospace series - Cables, electrical, aircraft use - Test methods -
Part 604: Resistance to dry arc propagation; German and English version
EN 3475-604:2018 / Note: Applies in conjunction with DIN EN 3475-100
(2011-01).*To be replaced by DIN EN 3475-604 (2024-12).
DIN
DIN ETS 300266:1994-10
In Force
1994-10-01
Integrated Services Digital Network (ISDN) - Videotelephony teleservice
- Functional capabilities and information flows; English version ETS 300266:1994
DIN
DIN EN ISO 3815-1:2005-08
In Force
2005-08-01
Zinc and zinc alloys - Part 1: Analysis of solid samples by optical
emission spectrometry (ISO 3815-1:2005); German version EN ISO 3815-1:2005
DIN
DIN EN 13880-13:2018-08
In Force
2018-08-01
Hot applied joint sealants - Part 13: Test method for the determination
of the discontinuous extension (adherence test); German version EN 13880-13:2018
DIN
DIN EN ISO 11064-7:2006-08
In Force
2006-08-01
Ergonomic design of control centres - Part 7: Principles for the
evaluation of control centres (ISO 11064-7:2006); German version ISO 11064-7:2006
DIN
DIN EN 62358:2013-05
In Force
2013-05-01
Ferrite cores - Standard inductance factor for gapped cores and its
tolerance (IEC 62358:2012); German version EN 62358:2012 / Note: DIN EN
62358 (2005-01) remains valid alongside this standard until 2015-11-16.
DIN
DIN EN 30-1-1/A2:2024-12
In Force
2024-12-01
Domestic cooking appliances burning gas - Part 1-1: Safety - General;
German and English version EN 30-1-1:2021+A1:2023/prA2:2024 / Note: Date
of issue 2024-11-22*Intended as an amendment to DIN EN 30-1-1 (2024-07).
DIN
DIN EN 16261-3:2013-03
In Force
2013-03-01
Pyrotechnic articles - Fireworks, Category 4 - Part 3: Test methods;
German version EN 16261-3:2012 / Note: To be replaced by DIN EN 16261-3 (2021-06).
DIN
DIN EN 301489-1:2020-06
In Force
2020-06-01
ElectroMagnetic Compatibility (EMC) standard for radio equipment and
services - Part 1: Common technical requirements - Harmonised Standard
for ElectroMagnetic Compatibility (Endorsement of the English version EN
301 489-1 V2.2.3 (2019-11) as a German standard) / Note: DIN ETS
standards collection*Endorsement notice
DIN
DIN EN 300396-5:2012-07
In Force
2012-07-01
Terrestrial Trunked Radio (TETRA) - Technical requirements for Direct
Mode Operation (DMO) - Part 5: Gateway air interface (Endorsement of the
English version EN 300396-5 V1.3.1 (2011-12) as German standard) / Note:
DIN ETS standards collection*Endorsement notice
DIN
DIN EN IEC 62541-15:2025-03
In Force
2025-03-01
OPC Unified Architecture - Part 15: Safety (IEC 65C/1292/CDV:2024);
English version prEN IEC 62541-15:2024 / Note: Date of issue 2025-02-21
DIN
DIN EN 40-3-3:2013-06
In Force
2013-06-01
Lighting columns - Part 3-3: Design and verification - Verification by
calculation; German version EN 40-3-3:2013
DIN
DIN EN 419212-4:2018-06
In Force
2018-06-01
Application Interface for Secure Elements for Electronic Identification,
Authentication and Trusted Services - Part 4: Privacy specific
Protocols; English version EN 419212-4:2018
DIN
DIN EN ISO 308:1998-03
In Force
1998-03-01
Plastics - Phenolic moulding materials - Determination of
acetone-soluble matter (apparent resin content of material in the
unmoulded state) (ISO 308:1994); German version EN ISO 308:1997
DIN
DIN EN ISO 7533:2025-04
In Force
2025-04-01
Technical product documentation (TPD) - Identification of specifications
in the technical product documentation (TPD) (ISO 7533:2024); German
version EN ISO 7533:2024
DIN
DIN EN ISO 3651-1:1998-08
In Force
1998-08-01
Determination of resistance to intergranular corrosion of stainless
steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless
steels - Corrosion test in nitric acid medium by measurement of loss in
mass (Huey test) (ISO 3651-1:1998); German version EN ISO 3651-1:1998
DIN
DIN EN 62595-2:2013-08
In Force
2013-08-01
LCD backlight unit - Part 2: Electro-optical measurement methods of LED
backlight unit (IEC 62595-2:2012); German version EN 62595-2:2013
DIN
DIN EN 1242:2013-05
In Force
2013-05-01
Adhesives - Determination of isocyanate content; German version EN 1242:2013
DIN
DIN EN 806-1:2024-10
In Force
2024-10-01
Specifications for installations inside buildings conveying water
intended for human consumption - Part 1: General; German and English
version prEN 806-1:2024 / Note: Date of issue 2024-09-20*Intended as
replacement for DIN EN 806-1 (2001-12).
DIN
DIN EN 15151-1:2012-10
In Force
2012-10-01
Mountaineering equipment - Braking devices - Part 1: Braking devices
with manually assisted locking, safety requirements and test methods;
German version EN 15151-1:2012
DIN
DIN EN 12035:1996-07
In Force
1996-07-01
Self adhesive tapes - Flagging of adhesive tape; German version EN 12035:1996
DIN
DIN EN 13141-11:2015-07
In Force
2015-07-01
Ventilation for buildings - Performance testing of components/products
for residential ventilation - Part 11: Supply ventilation units; German
version EN 13141-11:2015
DIN
DIN 22012:1994-01
In Force
1994-01-01
Investigations of the raw material in hard-coal-mining;
macropetrographic classification and topographic survey of hard-coal and
host rock
DIN
DIN EN ISO 2815:2003-10
In Force
2003-10-01
Paints and varnishes - Buchholz indentation test (ISO 2815:2003); German
version EN ISO 2815:2003
DIN
DIN EN 302878-1:2012-07
In Force
2012-07-01
Access, Terminals, Transmission and Multiplexing (ATTM) - Third
Generation Transmission Systems for Interactive Cable Television
Services - IP Cable Modems - Part 1: General, DOCSIS 3.0 (Endorsement of
the English version EN 302878-1 V1.1.1 (2011-11) as German standard) /
Note: DIN ETS standards collection*Endorsement notice
DIN
DIN EN ISO 9921:2004-02
In Force
2004-02-01
Ergonomics - Assessment of speech communication (ISO 9921:2003); German
version EN ISO 9921:2003
DIN
DIN EN ISO 15614-11:2002-10
In Force
2026-04-01
Specification and qualification of welding procedures for metallic
materials - Welding procedure test - Part 11: Electron and laser beam
welding (ISO 15614-11:2002); German version EN ISO 15614-11:2002
DIN
DIN EN 12089:2013-06
In Force
2013-06-01
Thermal insulating products for building applications - Determination of
bending behaviour; German version EN 12089:2013
DIN
DIN EN ISO 14024:2018-06
In Force
2018-06-01
Environmental labels and declarations - Type I environmental labelling -
Principles and procedures (ISO 14024:2018); German and English version
EN ISO 14024:2018
DIN
DIN
DIN EN ISO 15876-5:2021-03
In Force
2021-03-01
Plastics piping systems for hot and cold water installations -
Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO
15876-5:2017 + Amd. 1:2020); German and English version EN ISO
15876-5:2017 + A1:2020 / Note: This standard is part of the DVGW body of rules.
DIN
DIN EN ISO 20166-1:2019-04
In Force
2019-04-01
Molecular in vitro diagnostic examinations - Specifications for
pre-examination processes for formalin-fixed and paraffin-embedded
(FFPE) tissue - Part 1: Isolated RNA (ISO 20166-1:2018); German version
EN ISO 20166-1:2018
DIN
DIN EN ISO 17231:2017-12
In Force
2017-12-01
Leather - Physical and mechanical tests - Determination of water
repellency of garment leather (ISO 17231:2017); German version EN ISO 17231:2017
DIN
DIN ISO 9222-2:1991-03
In Force
1991-03-01
Technical drawings; seals for dynamic application; part 2: detailed
simplified representation; identical with ISO 9222-2:1989
DIN
DIN EN IEC 62220-2:2022-11
In Force
2026-04-01
Medical electrical equipment - Characteristics of digital X-ray imaging
devices - Part 2: Determination of dual-energy subtraction efficiency -
Detectors used for dual-energy radiographic imaging (IEC/CDV
62220-2:2022); German and English version prEN IEC 62220-2:2022 / Note:
Date of issue 2022-10-21
DIN
DIN EN ISO 13894-1:2015-06
In Force
2015-06-01
High-pressure decorative laminates - Composite elements - Part 1 : Test
methods (ISO 13894-1:2000); German version EN ISO 13894-1:2015
DIN
DIN EN ISO 27020:2019-12
In Force
2019-12-01
Dentistry - Brackets and tubes for use in orthodontics (ISO 27020:2019);
German version EN ISO 27020:2019
DIN
DIN ISO 16000-36:2019-07
In Force
2019-07-01
Indoor air - Part 36: Standard method for assessing the reduction rate
of culturable airborne bacteria by air purifiers using a test chamber
(ISO 16000-36:2018, Corrected version 2019-03-01)
DIN
DIN EN ISO 787-17:2019-08
In Force
2019-08-01
General methods of test for pigments and extenders - Part 17: Comparison
of lightening power of white pigments (ISO 787-17:2019); German version
EN ISO 787-17:2019
DIN
DIN EN ISO 16923:2018-07
In Force
2018-07-01
Natural gas fuelling stations - CNG stations for fuelling vehicles (ISO
16923:2016); German version EN ISO 16923:2018 / Note: This standard is
part of the DVGW body of rules.
DIN
DIN ISO 14135-1:2022-04
In Force
2022-04-01
Optics and photonics - Specifications for telescopic sights - Part 1:
General-purpose instruments (ISO 14135-1:2021)
DIN
DIN EN 1873-1:2020-09
In Force
2020-09-01
Prefabricated accessories for roofing - Part 1: Individual plastic
rooflights - Product specification and test methods; German and English
version prEN 1873-1:2020 / Note: Date of issue 2020-08-07*Intended as
replacement for DIN EN 1873 (2016-07).
DIN
DIN EN ISO 22553-3:2021-03
In Force
2021-03-01
Paints and varnishes - Electro-deposition coatings - Part 3:
Compatibility of electro-deposition coating materials with a reference
oil (ISO 22553-3:2019); German version EN ISO 22553-3:2020
DIN
DIN EN ISO 22515:2023-07
In Force
2023-07-01
Water quality - Iron-55 - Test method using liquid scintillation
counting (ISO 22515:2021); German version EN ISO 22515:2021
DIN
DIN ISO 565:1998-12
In Force
1998-12-01
Test sieves - Metal wire cloth, perforated metal plate and electroformed
sheet - Nominal sizes of openings (ISO 565:1990)
DIN
DIN EN ISO 14692-3:2018-02
In Force
2018-02-01
Petroleum and natural gas industries - Glass-reinforced plastics (GRP)
piping - Part 3: System design (ISO 14692-3:2017); English version EN
ISO 14692-3:2017
DIN
DIN EN ISO 10545-4:2019-06
In Force
2019-06-01
Ceramic tiles - Part 4: Determination of modulus of rupture and breaking
strength (ISO 10545-4:2019); German version EN ISO 10545-4:2019
DIN
DIN EN ISO 11553-1:2021-01
In Force
2021-01-01
Safety of machinery - Laser processing machines - Part 1: Laser safety
requirements (ISO 11553-1:2020); German version EN ISO 11553-1:2020 + A11:2020
DIN
DIN EN ISO 28080:2021-06
In Force
2021-06-01
Hardmetals - Abrasion tests for hardmetals (ISO 28080:2021); German
version EN ISO 28080:2021
DIN
DIN ISO 21882:2020-12
In Force
2020-12-01
Sterile packaged ready for filling glass vials (ISO 21882:2019)
DIN
DIN ISO 16779:2018-05
In Force
2018-05-01
Sensory analysis - Assessment (determination and verification) of the
shelf life of foodstuffs (ISO 16779:2015)
DIN
DIN ISO 6618:2015-07
In Force
2015-07-01
Petroleum products and lubricants - Determination of acid or base number
- Colour-indicator titration method (ISO 6618:1997)
DIN
DIN EN ISO 6320:2017-07
In Force
2017-07-01
Animal and vegetable fats and oils - Determination of refractive index
(ISO 6320:2017); German version EN ISO 6320:2017
DIN
DIN EN ISO 11690-2:2021-04
In Force
2021-04-01
Acoustics - Recommended practice for the design of low-noise workplaces
containing machinery - Part 2: Noise control measures (ISO
11690-2:2020); German version EN ISO 11690-2:2020
DIN
DIN ISO 20716:2024-05
In Force
2024-05-01
Oolong tea - Definition and basic requirements (ISO 20716:2022)
DIN
DIN EN ISO 8041-1:2017-10
In Force
2017-10-01
Human response to vibration - Measuring instrumentation - Part 1:
General purpose vibration meters (ISO 8041-1:2017); German version EN
ISO 8041-1:2017
DIN
DIN EN ISO/IEC 13273-1:2016-06
In Force
2016-06-01
Energy efficiency and renewable energy sources - Common international
terminology - Part 1: Energy efficiency (ISO/IEC 13273-1:2015); German
version EN ISO/IEC 13273-1:2016
DIN
DIN EN IEC 60747-16-9:2022-06
In Force
2022-06-01
Semiconductor devices - Part 16-9: Microwave integrated circuits - Phase
shifters (IEC 47E/768/CD:2021); Text in German and English / Note: Date
of issue 2022-05-27
DIN
DIN EN ISO 10545-14:2016-02
In Force
2016-02-01
Ceramic tiles - Part 14: Determination of resistance to stains (ISO
10545-14:2015); German version EN ISO 10545-14:2015
