Normas DIN
Filtrar:
DIN
DIN EN 1097-8:2020-06
In Force
2020-06-01
Tests for mechanical and physical properties of aggregates - Part 8:
Determination of the polished stone value; German version EN 1097-8:2020
DIN
DIN EN 16024:2011-06
In Force
2011-06-01
Fertilizers - Determination of 1H-1,2,4-triazole in urea and in
fertilizers containing urea - Method using high-performance liquid
chromatography (HPLC); German version EN 16024:2011
DIN
DIN EN ISO 11111-5:2016-12
In Force
2016-12-01
Textile machinery - Safety requirements - Part 5: Preparatory machinery
to weaving and knitting (ISO 11111-5:2005 + Amd 1:2009 + Amd 2:2016);
German version EN ISO 11111-5:2005 + A1:2009 + A2:2016 / Note: DIN EN
ISO 11111-5 (2009-12) remains valid alongside this standard until
2016-12-31.*Applies in conjunction with DIN EN ISO 11111-1 (2016-12).
DIN
DIN EN ISO 17892-7:2018-05
In Force
2018-05-01
Geotechnical investigation and testing - Laboratory testing of soil -
Part 7: Unconfined compression test (ISO 17892-7:2017); German version
EN ISO 17892-7:2018
DIN
DIN EN 4120:2006-11
In Force
2006-11-01
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting
nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread -
Classification: 1210 MPa (at ambient temperature)/730 °C; German and
English version EN 4120:2004
DIN
DIN EN 4008-001:2008-02
In Force
2008-02-01
Aerospace series - Elements of electrical and optical connection -
Crimping tools and associated accessories - Part 001: Technical
specification; German and English version EN 4008-001:2006
DIN
DIN EN 3841-304:2005-09
In Force
2005-09-01
Aerospace series - Circuit breakers - Test methods - Part 304: Tripping
points; German and English version EN 3841-304:2004 / Note: Applies in
conjunction with DIN EN 3841-100 (2005-09).
DIN
DIN EN 60917-2-4:2011-01
In Force
2011-01-01
Modular order for the development of mechanical structures for
electronic equipment practices - Part 2-4: Sectional specification -
Interface coordination dimensions for the 25 mm equipment practice -
Adaptation dimensions for subracks or chassis applicable in cabinets or
racks in accordance with IEC 60297-3-100 (19 in) (IEC 60917-2-4:2010);
German version EN 60917-2-4:2010
DIN
DIN ETS 300670:2000-05
In Force
2000-05-01
Intelligent Network (IN) - Intelligent Network Capability Set 1 (CS1) -
Application of Intelligent Network Application Protocols (INAPs) for UPT
service set 1 [ITU-T-Recommendation Q.1551:1997] (Endorsement of the
English version ETS 300670:1998 as German standard) / Note: Endorsement notice
DIN
DIN EN ISO 17892-9:2018-07
In Force
2018-07-01
Geotechnical investigation and testing - Laboratory testing of soil -
Part 9: Consolidated triaxial compression tests on water saturated soils
(ISO 17892-9:2018); German version EN ISO 17892-9:2018
DIN
DIN EN 12327:2012-10
In Force
2012-10-01
Gas infrastructure - Pressure testing, commissioning and decommissioning
procedures - Functional requirements; German version EN 12327:2012
DIN
DIN EN ISO 105-X12:2016-11
In Force
2016-11-01
Textiles - Tests for colour fastness - Part X12: Colour fastness to
rubbing (ISO 105-X12:2016); German version EN ISO 105-X12:2016
DIN
DIN EN ISO 11702:2016-11
In Force
2016-11-01
Animal and vegetable fats and oils - Enzymatic determination of total
sterols content (ISO 11702:2016); German version EN ISO 11702:2016
DIN
DIN EN 10130:2007-02
In Force
2007-02-01
Cold rolled low carbon steel flat products for cold forming - Technical
delivery conditions; German version EN 10130:2006
DIN
DIN EN 4425:2007-03
In Force
2007-03-01
Aerospace series - Washers, tab in corrosion resisting steel for flight
control rods - Dimensions; German and English version EN 4425:2006
DIN
DIN EN 16278:2012-09
In Force
2012-09-01
Animal feeding stuffs - Determination of inorganic arsenic by hydride
generation atomic absorption spectrometry (HG-AAS) after microwave
extraction and separation by solid phase extraction (SPE); German
version EN 16278:2012
DIN
DIN EN ISO 12780-1:2014-04
In Force
2014-04-01
Geometrical product specifications (GPS) - Straightness - Part 1:
Vocabulary and parameters of straightness (ISO 12780-1:2011); German
version EN ISO 12780-1:2011
DIN
DIN EN 3325:2008-05
In Force
2008-05-01
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat
resisting steel FE-PM1708 (FV 535) - Classification: 1 000 MPa/550 °C -
Unplated; German and English version EN 3325:2007
DIN
DIN EN 14782:2006-03
In Force
2006-03-01
Self-supporting metal sheet for roofing, external cladding and internal
lining - Product specification and requirements; German version EN
14782:2006 / Note: To be replaced by DIN EN 14782 (2015-09).
DIN
DIN
DIN EN ISO 18311:2018-04
In Force
2018-04-01
Soil quality - Method for testing effects of soil contaminants on the
feeding activity of soil dwelling organisms - Bait-lamina test (ISO
18311:2016); German version EN ISO 18311:2018
DIN
DIN IEC/TS 62913-2-1:2023-05
In Force
2023-05-01
Generic smart grid requirements - Part 2-1: Grid related domains (IEC
SRD 62913-2-1:2019)
DIN
DIN EN 13087-10:2012-04
In Force
2012-04-01
Protective helmets - Test methods - Part 10: Resistance to radiant heat;
German version EN 13087-10:2012
DIN
DIN EN ISO 4120:2021-06
In Force
2021-06-01
Sensory analysis - Methodology - Triangle test (ISO 4120:2021); German
version EN ISO 4120:2021
DIN
DIN EN 13084-4:2005-12
In Force
2005-12-01
Free-standing chimneys - Part 4: Brick liners - Design and execution;
German version EN 13084-4:2005
DIN
DIN EN 1514-8:2005-02
In Force
2005-02-01
Flanges and their joints - Dimensions of gaskets for PN-designated
flanges - Part 8: Polymeric O-Ring gaskets for grooved flanges; German
version EN 1514-8:2004
DIN
DIN EN 12007-2:2012-10
In Force
2012-10-01
Gas infrastructure - Pipelines for maximum operating pressure up to and
including 16 bar - Part 2: Specific functional requirements for
polyethylene (MOP up to and including 10 bar); German version EN 12007-2:2012
DIN
DIN EN ISO 23450:2021-07
In Force
2021-07-01
Dentistry - Intraoral camera (ISO 23450:2021); German version EN ISO 23450:2021
DIN
DIN EN 16037:2012-09
In Force
2012-09-01
Chemicals used for treatment of water intended for human consumption -
Sodium hydrogen sulfate; German version EN 16037:2012
DIN
DIN EN 1993-6:2010-12
In Force
2010-12-01
Eurocode 3: Design of steel structures - Part 6: Crane supporting
structures; German version EN 1993-6:2007 + AC:2009 / Note: To be
replaced by DIN EN 1993-6 (2024-02).
DIN
DIN EN 14575:2005-07
In Force
2005-07-01
Geosynthetic barriers - Screening test method for determining the
resistance to oxidation; German version EN 14575:2005
DIN
DIN EN 61966-6:2006-09
In Force
2006-09-01
Multimedia systems and equipment - Colour measurement and management -
Part 6: Front projection displays (IEC 61966-6:2005); German version EN 61966-6:2006
DIN
DIN EN 3841-303:2005-09
In Force
2005-09-01
Aerospace series - Circuit breakers - Test methods - Part 303:
Dielectric strength; German and English version EN 3841-303:2004 / Note:
Applies in conjunction with DIN EN 3841-100 (2005-09).
DIN
DIN EN 15146:2007-03
In Force
2007-03-01
Solid softwood panelling and cladding - Machined profiles without tongue
and groove; German version EN 15146:2006
DIN
DIN EN ISO 4259-1:2021-05
In Force
2021-05-01
Petroleum and related products - Precision of measurement methods and
results - Part 1: Determination of precision data in relation to methods
of test (ISO 4259-1:2017 + Amd 1:2019 + Amd 2:2020); German version EN
ISO 4259-1:2017 + A1:2019 + A2:2020
DIN
DIN EN 15234-5:2012-04
In Force
2012-04-01
Solid biofuels - Fuel quality assurance - Part 5: Firewood for
non-industrial use; German version EN 15234-5:2012
DIN
DIN EN ISO/IEC 80079-20-1:2020-09
In Force
2020-09-01
Explosive atmospheres - Part 20-1: Material characteristics for gas and
vapour classification - Test methods and data (ISO/IEC 80079-20-1:2017,
including Cor 1:2018); German version EN ISO/IEC 80079-20-1:2019
DIN
DIN EN 14987:2007-02
In Force
2007-02-01
Plastics - Evaluation of disposability in waste water treatment plants -
Test scheme for final acceptance and specifications; German version EN 14987:2006
DIN
DIN EN ISO 11124-5:2021-07
In Force
2021-07-01
Preparation of steel substrates before application of paints and related
products - Specifications for metallic blast-cleaning abrasives - Part
5: Cut steel wire (ISO 11124-5:2019); German version EN ISO 11124-5:2021
DIN
DIN EN 1992-3/NA:2011-01
In Force
2011-01-01
National Annex - Nationally determined parameters - Eurocode 2: Design
of concrete structures - Part 3: Liquid retaining and containment
structures / Note: Applies in conjunction with DIN EN 1992-3 (2011-01).
DIN
DIN EN ISO 20957-4:2017-03
In Force
2017-03-01
Stationary training equipment - Part 4: Strength training benches,
additional specific safety requirements and test methods (ISO
20957-4:2016); German version EN ISO 20957-4:2016
DIN
DIN EN ISO 52017-1:2018-04
In Force
2018-04-01
Energy performance of buildings - Sensible and latent heat loads and
internal temperatures - Part 1: Generic calculation procedures (ISO
52017-1:2017); German version EN ISO 52017-1:2017
DIN
DIN EN 61988-2-4:2012-04
In Force
2012-04-01
Plasma display panels - Part 2-4: Measuring methods - Visual quality:
Image artifacts (IEC 61988-2-4:2011); German version EN 61988-2-4:2011
DIN
DIN EN ISO 8536-5:2013-10
In Force
2013-10-01
Infusion equipment for medical use - Part 5: Burette infusion sets for
single use, gravity feed (ISO 8536-5:2004); German version EN ISO 8536-5:2013
DIN
DIN EN 795:2012-10
In Force
2012-10-01
Personal fall protection equipment - Anchor devices; German version EN
795:2012 / Note: To be replaced by DIN EN 795 (2022-12).
DIN
DIN IEC 60852-2:1994-02
In Force
1994-02-01
Outline dimensions of transformers and inductors for use in
telecommunication and electronic equipment; part 2: transformers and
inductors using YEx 2 laminations for printed wiring board mounting;
identical with IEC 60852-2:1992
DIN
DIN
DIN EN 62345:2005-09
In Force
2005-09-01
ID format for 50 mm magneto-optical disc system (IEC 62345:2005); German
version EN 62345:2005, text in English
DIN
DIN
DIN IEC 60807-1:1993-04
In Force
1993-04-01
Rectangular connectors for frequencies below 3 MHz; part 1: generic
specification; general requirements; identical with IEC 60807-1:1991
DIN
DIN
DIN ETS 300544:1995-09
In Force
1995-09-01
European digital cellular telecommunications system (Phase 2) - Call
Waiting (CW) and Call Hold (HOLD) supplementary services - Stage 2;
English version ETS 300544:1995
DIN
DIN EN 679:2005-09
In Force
2005-09-01
Determination of the compressive strength of autoclaved aerated
concrete; German version EN 679:2005
DIN
DIN ETS 300413:1995-11
In Force
1995-11-01
Transmission and Multiplexing (TM) - Multiplex section protection
information model for the Network Element (NE) view; English version ETS 300413:1995
DIN
DIN IEC 60381-1:1985-11
In Force
1985-11-01
Analogue signals for process control systems; direct current signals;
identical with IEC 60381-1, edition 1982
DIN
DIN EN 62514:2011-01
In Force
2011-01-01
Multimedia gateway in home networks - Guidelines (IEC 62514:2010);
German version EN 62514:2010
DIN
DIN EN ISO 3656:2017-08
In Force
2017-08-01
Animal and vegetable fats and oils - Determination of ultraviolet
absorbance expressed as specific UV extinction (ISO 3656:2011 + Amd
1:2017); German version EN ISO 3656:2011 + A1:2017
DIN
DIN EN 3841-302:2005-09
In Force
2005-09-01
Aerospace series - Circuit breakers - Test methods - Part 302:
Insulation resistance; German and English version EN 3841-302:2004 /
Note: Applies in conjunction with DIN EN 3841-100 (2005-09).
DIN
DIN EN ISO 23036-2:2021-08
In Force
2021-08-01
Microbiology of the food chain - Methods for the detection of Anisakidae
L3 larvae in fish and fishery products - Part 2: Artificial digestion
method (ISO 23036-2:2021); German version EN ISO 23036-2:2021
DIN
DIN EN 12007-1:2012-10
In Force
2012-10-01
Gas infrastructure - Pipelines for maximum operating pressure up to and
including 16 bar - Part 1: General functional requirements; German
version EN 12007-1:2012
