Normas DIN
Filtrar:
DIN
DIN EN 301489-35:2020-02
In Force
2020-02-01
ElectroMagnetic Compatibility (EMC) standard for radio equipment and
services - Part 35: Specific requirements for Low Power Active Medical
Implants (LP-AMI) operating in the 2 483,5 MHz to 2 500 MHz bands -
Harmonised Standard covering the essential requirements of article
3.1(b) of Directive 2014/53/EU (Endorsement of the English version EN
301 489-35 V2.2.1 (2019-04) as a German standard) / Note: DIN ETS
standards collection*Endorsement notice
DIN
DIN
DIN EN IEC 61158-1:2020-04
In Force
2020-04-01
Industrial communication networks - Fieldbus specifications - Part 1:
Overview and guidance for the IEC 61158 and IEC 61784 series (IEC
61158-1:2019); German version EN IEC 61158-1:2019 / Note: DIN EN 61158-1
(2015-02) remains valid alongside this standard until 2022-05-15.*To be
replaced by DIN EN IEC 61158-1 (2022-07).
DIN
DIN EN 54-5:2018-10
In Force
2018-10-01
Fire detection and fire alarm systems - Part 5: Heat detectors - Point
heat detectors; German version EN 54-5:2017+A1:2018
DIN
DIN EN 62702-1-1 Berichtigung 1:2018-08
In Force
2018-08-01
Audio Archive System - Part 1-1: DVD disk and data migration for long
term audio data storage (IEC 62702-1-1:2016/COR1:2018); English version
EN 62702-1-1:2016/AC:2018-04 / Note: To be replaced by DIN EN IEC
62702-1-1 (2022-09).
DIN
DIN EN 13200-1:2019-05
In Force
2019-05-01
Spectator facilities - Part 1: General characteristics for spectator
viewing area; German version EN 13200-1:2019
DIN
DIN EN 62489-1:2018-09
In Force
2018-09-01
Electroacoustics - Audio-frequency induction loop systems for assisted
hearing - Part 1: Methods of measuring and specifying the performance of
system components (IEC 62489-1:2010 + A1:2014 + A2:2017); German version
EN 62489-1:2010 + A1:2015 + A2:2018 / Note: DIN EN 62489-1 (2015-10)
remains valid alongside this standard until 2021-01-01.
DIN
DIN EN ISO 9917-2:2017-12
In Force
2017-12-01
Dentistry - Water-based cements - Part 2: Resin-modified cements (ISO
9917-2:2017); German version EN ISO 9917-2:2017
DIN
DIN EN 18037:2023-12
In Force
2023-12-01
Guidelines on a sectoral cybersecurity assessment; German and English
version prEN 18037:2023 / Note: Date of issue 2023-11-17
DIN
DIN EN 1993-2:2024-02
In Force
2024-02-01
Eurocode 3 - Design of steel structures - Part 2: Bridges; German and
English version prEN 1993-2:2024 / Note: Date of issue
2024-01-19*Intended as replacement for DIN EN 1993-2 (2010-12).
DIN
DIN EN ISO 15876-2:2021-03
In Force
2021-03-01
Plastics piping systems for hot and cold water installations -
Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017 + Amd 1:2020); German
and English version EN ISO 15876-2:2017 + A1:2020 / Note: This standard
is part of the DVGW body of rules.
DIN
DIN EN ISO 7263-1:2019-04
In Force
2019-04-01
Corrugating medium - Determination of the flat crush resistance after
laboratory fluting - Part 1: A-flute (ISO 7263-1:2018); German version
EN ISO 7263-1:2019
DIN
DIN EN 81-82:2023-07
In Force
2023-07-01
Safety rules for the construction and installation of lifts - Existing
lifts - Part 82: Rules for the improvement of the accessibility of
existing lifts for persons including persons with disability; German and
English version prEN 81-82:2023 / Note: Date of issue
2023-05-26*Intended as replacement for DIN EN 81-82 (2013-12).
DIN
DIN EN ISO 13408-2:2018-06
In Force
2018-06-01
Aseptic processing of health care products - Part 2: Sterilizing
filtration (ISO 13408-2:2018); German version EN ISO 13408-2:2018
DIN
DIN EN ISO 12759-5:2022-04
In Force
2022-04-01
Fans - Efficiency classification for fans - Part 5: Jet fans (ISO
12759-5:2021); German version EN ISO 12759-5:2021
DIN
DIN EN ISO 5349-2:2015-12
In Force
2015-12-01
Mechanical vibration - Measurement and evaluation of human exposure to
hand-transmitted vibration - Part 2: Practical guidance for measurement
at the workplace (ISO 5349-2:2001 + Amd 1:2015); German version EN ISO
5349-2:2001 + A1:2015
DIN
DIN EN ISO 8394-2:2018-03
In Force
2018-03-01
Buildings and civil engineering works - Determination of extrudability
for sealant - Part 2: Using standardized apparatus (ISO 8394-2:2017);
German version EN ISO 8394-2:2017
DIN
DIN EN ISO 20484:2017-07
In Force
2017-07-01
Non-destructive testing - Leak testing - Vocabulary (ISO 20484:2017);
German version EN ISO 20484:2017
DIN
DIN EN ISO 8311:2014-03
In Force
2014-03-01
Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels
- Calibration of membrane tanks and independent prismatic tanks in ships
- Manual and internal electro-optical distance-ranging methods (ISO
8311:2013); German version EN ISO 8311:2013
DIN
DIN EN ISO/ASTM 52911-1:2020-05
In Force
2020-05-01
Additive manufacturing - Design - Part 1: Laser-based powder bed fusion
of metals (ISO/ASTM 52911-1:2019); German version EN ISO/ASTM 52911-1:2019
DIN
DIN EN ISO 14597:1999-03
In Force
1999-03-01
Petroleum products - Determination of vanadium and nickel content -
Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14597:1997);
German version EN ISO 14597:1999
DIN
DIN EN ISO 11747:2018-06
In Force
2018-06-01
Rice - Determination of rice kernel resistance to extrusion after
cooking (ISO 11747:2012 + Amd 1:2017); German version EN ISO 11747:2012
+ A1:2018
DIN
DIN EN ISO 15626:2018-11
In Force
2018-11-01
Non-destructive testing of welds - Time-of-flight diffraction technique
(TOFD) - Acceptance levels (ISO 15626:2018); German version EN ISO 15626:2018
DIN
DIN EN ISO 18082:2017-12
In Force
2017-12-01
Anaesthetic and respiratory equipment - Dimensions of
non-interchangeable screw-threaded (NIST) low-pressure connectors for
medical gases (ISO 18082:2014 + Amd. 1:2017); German version EN ISO
18082:2014 + A1:2017
DIN
DIN EN ISO 24134:2018-12
In Force
2018-12-01
Industrial trucks - Additional requirements for automated functions on
trucks (ISO 24134:2006); German version EN ISO 24134:2018
DIN
DIN EN ISO 17824:2014-11
In Force
2014-11-01
Petroleum and natural gas industries - Downhole equipment - Sand screens
(ISO 17824:2009); English version EN ISO 17824:2014
DIN
DIN EN ISO 4829-2:2016-08
In Force
2016-08-01
Steels - Determination of total silicon contents - Reduced
molybdosilicate spectrophotometric method - Part 2: Silicon contents
between 0,01 % and 0,05 % (ISO 4829-2:2016); German version EN ISO 4829-2:2016
DIN
DIN EN ISO 4254-9:2019-10
In Force
2019-10-01
Agricultural machinery - Safety - Part 9: Seed drills (ISO 4254-9:2018);
German version EN ISO 4254-9:2018
DIN
DIN EN ISO 21656:2021-06
In Force
2021-06-01
Solid recovered fuels - Determination of ash content (ISO 21656:2021);
German version EN ISO 21656:2021
DIN
DIN EN 4838-001:2018-11
In Force
2018-11-01
Aerospace series - Arc Fault Circuit breakers, single-pole, temperature
compensated, rated current 3 A to 25 A - 115 V a.c. 400 Hz Constant
Frequency - Part 001: Technical specification; German and English
version EN 4838-001:2018
DIN
DIN EN ISO 11201:2010-10
In Force
2010-10-01
Acoustics - Noise emitted by machinery and equipment - Determination of
emission sound pressure levels at a work station and at other specified
positions in an essentially free field over a reflecting plane with
negligible environmental corrections (ISO 11201:2010); German version EN
ISO 11201:2010
DIN
DIN ISO 9352:2018-08
In Force
2018-08-01
Plastics - Determination of resistance to wear by abrasive wheels (ISO 9352:2012)
DIN
DIN ISO 2976:2005-10
In Force
2005-10-01
Coated abrasives - Abrasive belts - Selection of width/length
combinations (ISO 2976:2005)
DIN
DIN EN 301258:2004-12
In Force
2004-12-01
Private Integrated Services Network (PISN) - Inter-exchange signalling
protocol - Recall supplementary service (ISO/IEC 15052 (2003), modified)
(Endorsement of the English version EN 301258 V1.2.1 (2004-01) as German
standard) / Note: DIN ETS standards collection*Endorsement notice
DIN
DIN ETS 300173:2000-06
In Force
2000-06-01
Private Integrated Services Network (PISN) - Specification, functional
models and information flows - Identification supplementary services
[ISO/IEC 14136 (1995), modified] (Endorsement of the English version ETS
300173:1996 as German standard) / Note: Endorsement notice
DIN
DIN EN 4460:2006-05
In Force
2006-05-01
Aerospace series - Studs, in titanium alloy TI-P64001, with serrated
locking ring in corrosion resisting steel - Installation and removal
procedure; German and English version EN 4460:2005
DIN
DIN EN ISO 11699-1:2012-01
In Force
2012-01-01
Non-destructive testing - Industrial radiographic films - Part 1:
Classification of film systems for industrial radiography (ISO
11699-1:2008); German version EN ISO 11699-1:2011
DIN
DIN EN 14518:2005-08
In Force
2005-08-01
Ventilation for buildings - Chilled beams - Testing and rating of
passive chilled beams; German version EN 14518:2005
DIN
DIN 55201-2:1987-12
In Force
1987-12-01
Machine tools; pallets for machine tools; nominal sizes over 800 mm;
form B
DIN
DIN ISO 6547 Berichtigung 1:2019-04
In Force
2019-04-01
Hydraulic fluid power-cylinder; piston seal housings incorporating
bearing rings; dimensions and tolerances; Corrigendum 1
DIN
DIN ISO 15592-1:2005-05
In Force
2005-05-01
Fine-cut tobacco and smoking articles made from it - Methods of
sampling, conditioning and analysis - Part 1: Sampling (ISO 15592-1:2001)
DIN
DIN EN 14892:2006-02
In Force
2006-02-01
Transport service - City logistics - Guideline for the definition of
limited access to city centers; German version EN 14892:2005
DIN
DIN ETS 300160:1998-03
In Force
1998-03-01
Satellite Earth Stations and Systems (SES) - Control and monitoring
functions at a Very Small Aperture Terminals (VSAT); English version ETS 300160:1997
DIN
DIN EN 300238:2004-12
In Force
2004-12-01
Private Integrated Services Network (PISN) - Inter-exchange signalling
protocol - Name identification supplementary service [ISO/IEC 13868
(2003), modified] (Endorsement of the English version DIN 300238 V1.3.1
(2004-01) as German standard) / Note: DIN ETS standards
collection*Endorsement notice
DIN
DIN EN 300364:2004-12
In Force
2004-12-01
Private Integrated Services Network (PISN) - Inter-exchange signalling
protocol - Do not disturb and do not disturb override supplementary
services (ISO/IEC 14844 (2003), modified) (Endorsement of the English
version EN 300364 V1.3.1 (2004-01) as German standard) / Note: DIN ETS
standards collection*Endorsement notice
DIN
DIN 18740-8:2024-02
In Force
2026-05-01
Photogrammetric products - Part 8: Requirements for image quality
(quality of optical remote sensing data) / Note: Date of issue 2024-01-05
DIN
DIN EN 301256:2004-12
In Force
2004-12-01
Private Integrated Services Network (PISN) - Specification, functional
models and information flows - Call interception Additional Network
Feature (ANF) (ISO/IEC 15053 (2003), modified) (Endorsement of the
English version EN 301256 V1.2.1 (2004-01) as German standard) / Note:
DIN ETS standards collection*Endorsement notice
DIN
DIN EN 14784-1:2005-11
In Force
2005-11-01
Non-destructive testing - Industrial computed radiography with storage
phosphor imaging plates - Part 1: Classification of systems; German
version EN 14784-1:2005
DIN
DIN EN 301113:2005-04
In Force
2005-04-01
Digital cellular telecommunications system (Phase 2+) - General Packet
Radio Service (GPRS) - Service description - Stage 1 (GSM 02.60 version
6.3.1 Release 1997) (Endorsement of the English version EN 301113 V6.3.1
(2000-11) as German standard) / Note: DIN ETS standards
collection*Endorsement notice
DIN
DIN EN 61337-1:2005-07
In Force
2005-07-01
Filters using waveguide type dielectric resonators - Part 1:Generic
specification (IEC 61337-1:2004); German version EN 61337-1:2004 / Note:
DIN EN 171000 (2002-02) remains valid alongside this standard until 2007-10-01.
DIN
DIN EN ISO 50001:2018-12
In Force
2018-12-01
Energy management systems - Requirements with guidance for use (ISO
50001:2018); German version EN ISO 50001:2018 / Note: To be amended by
DIN EN ISO 50001/A1 (2024-05).
DIN
DIN EN ISO 11298-3:2018-12
In Force
2018-12-01
Plastics piping systems for renovation of underground water supply
networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018);
German version EN ISO 11298-3:2018 / Note: This standard is part of the
DVGW body of rules.
DIN
DIN EN ISO 23996:2012-04
In Force
2012-04-01
Resilient floor coverings - Determination of density (ISO 23996:2007);
German version EN ISO 23996:2012
DIN
DIN EN 300392-12-16:2005-04
In Force
2005-04-01
Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 12:
Supplementary services stage 3 - Sub-part 16: Pre-emptive Priority Call
(PPC) (Endorsement of the English version EN 300392-12-16 V1.2.1
(2004-09) as German standard) / Note: DIN ETS standards
collection*Endorsement notice
DIN
DIN EN 15042-1:2006-06
In Force
2006-06-01
Thickness measurement of coatings and characterization of surfaces with
surface waves - Part 1: Guide to the determination of elastic constants,
density and thickness of films by laser induced surface acoustic waves;
German version EN 15042-1:2006
DIN
DIN EN 12094-5:2006-07
In Force
2006-07-01
Fixed firefighting systems - Components for gas extinguishing systems -
Part 5: Requirements and test methods for high and low pressure selector
valves and their actuators; German version EN 12094-5:2006
DIN
DIN EN ISO 17201-5:2010-06
In Force
2010-06-01
Acoustics - Noise from shooting ranges - Part 5: Noise management (ISO
17201-5:2010); German version EN ISO 17201-5:2010
DIN
DIN EN 60384-9-1:2006-01
In Force
2006-01-01
Fixed capacitors for use in electronic equipment - Part 9-1: Blank
detail specification - Fixed capacitors of ceramic dielectric, Class 2 -
Assessment level EZ (IEC 60384-9-1:2005); German version EN
60384-9-1:2005 / Note: DIN 45910-171 (1991-05) and DIN IEC 60384-9-1
(1993-01) remain valid alongside this standard until 2008-05-01.
DIN
DIN EN ISO 19901-1:2016-04
In Force
2016-04-01
Petroleum and natural gas industries - Specific requirements for
offshore structures - Part 1: Metocean design and operating
considerations (ISO 19901-1:2015); English version EN ISO 19901-1:2015,
only on CD-ROM / Note: CD-ROM*To be replaced by DIN EN ISO 19901-1 (2024-09).
DIN
DIN EN ISO 8894-1:2010-10
In Force
2010-10-01
Refractory materials - Determination of thermal conductivity - Part 1:
Hot-wire methods (cross-array and resistance thermometer) (ISO
8894-1:2010); German version EN ISO 8894-1:2010
