Normas DIN
Filtrar:
DIN
DIN EN ISO 20596-2:2023-07
In Force
2023-07-01
Water quality - Determination of cyclic volatile methylsiloxanes in
water - Part 2: Method using liquid-liquid extraction with gas
chromatography-mass spectrometry (GC-MS) (ISO 20596-2:2021); German
version EN ISO 20596-2:2022
DIN
DIN EN ISO 12813:2024-05
In Force
2024-05-01
Electronic fee collection - Compliance check communication for
autonomous systems (ISO 12813:2024); English version EN ISO 12813:2024
DIN
DIN EN ISO 8871-2:2020-09
In Force
2020-09-01
Elastomeric parts for parenterals and for devices for pharmaceutical use
- Part 2: Identification and characterization (ISO 8871-2:2020); German
version EN ISO 8871-2:2020
DIN
DIN EN ISO 5667-6/A11:2022-04
In Force
2022-04-01
Water quality - Sampling - Part 6: Guidance on sampling of rivers and
streams (ISO 5667-6:2014); German version EN ISO 5667-6:2016/A11:2020
DIN
DIN EN ISO 18323:2015-11
In Force
2015-11-01
Jewellery - Consumer confidence in the diamond industry (ISO
18323:2015); German version EN ISO 18323:2015
DIN
DIN EN ISO 11348-1:2023-12
In Force
2023-12-01
Water quality - Determination of the inhibitory effect of water samples
on the light emission of Vibrio fischeri (Luminescent bacteria test) -
Part 1: Method using freshly prepared bacteria (ISO 11348-1:2007 + Amd
1:2018); German version EN ISO 11348-1:2008 + A1:2018
DIN
DIN EN 1886:2024-06
In Force
2024-06-01
Ventilation for buildings - Air handling units - Mechanical performance;
German and English version prEN 1886:2024 / Note: Date of issue
2024-05-17*Intended as replacement for DIN EN 1886 (2009-07).
DIN
DIN EN ISO 9241-391:2016-10
In Force
2016-10-01
Ergonomics of human-system interaction - Part 391: Requirements,
analysis and compliance test methods for the reduction of photosensitive
seizures (ISO 9241-391:2016); German version EN ISO 9241-391:2016
DIN
DIN EN ISO 9809-3:2020-02
In Force
2020-02-01
Gas cylinders - Design, construction and testing of refillable seamless
steel gas cylinders and tubes - Part 3: Normalized steel cylinders and
tubes (ISO 9809-3:2019); German version EN ISO 9809-3:2019
DIN
DIN EN 18135:2024-11
In Force
2026-05-01
Resilient, textile, laminate and modular mechanical locked floor
coverings - Circular Economy - Floor coverings and underlays passport;
German and English version prEN 18135:2024 / Note: Date of issue 2024-10-11
DIN
DIN EN ISO 13397-1:1996-05
In Force
1996-05-01
Periodontal curettes, dental scalers and excavators - Part 1: General
requirements (ISO 13397-1:1995); German version EN ISO 13397-1:1995
DIN
DIN 30901:2016-12
In Force
2016-12-01
Heat treatment of ferrous materials - Determination of the depth and
form of appearance of the internal oxidation
DIN
DIN 24482:1992-06
In Force
1992-06-01
Horizontal cold chamber die-casting-machines; sizes, main dimensions
DIN
DIN EN ISO 16140-6:2020-04
In Force
2020-04-01
Microbiology of the food chain - Method validation - Part 6: Protocol
for the validation of alternative (proprietary) methods for
microbiological confirmation and typing procedures (ISO 16140-6:2019);
German version EN ISO 16140-6:2019
DIN
DIN EN ISO 13606-1:2019-11
In Force
2019-11-01
Health informatics - Electronic health record communication - Part 1:
Reference model (ISO 13606-1:2019); English version EN ISO 13606-1:2019
DIN
DIN EN ISO 4884:2020-02
In Force
2020-02-01
Hardmetals - Sampling and testing of powders using sintered test pieces
(ISO 4884:2019); German version EN ISO 4884:2019
DIN
DIN EN ISO 5381:1994-10
In Force
1994-10-01
Starch hydrolysis products - Determination of water content - Modified
Karl Fischer method (ISO 5381:1983); German version EN ISO 5381:1994
DIN
DIN 30910-1:1990-10
In Force
1990-10-01
Sintered metal materials; Werkstoff-Leistungsblätter (WLB) sint-material
specifications; part 1: explanatory notes for WLB
DIN
DIN EN ISO 7536:1996-08
In Force
1996-08-01
Petroleum products - Determination of oxidation stability of gasoline -
Induction period method (ISO 7536:1994); German version EN ISO 7536:1996
DIN
DIN EN ISO 105-X11:1996-10
In Force
1996-10-01
Textiles - Tests for colour fastness - Part X11: Colour fastness to hot
pressing (ISO 105-X11:1994); German version EN ISO 105-X11:1996 / Note:
To be replaced by DIN EN ISO 105-X11 (2024-09).
DIN
DIN 53545:2016-12
In Force
2016-12-01
Testing of rubber - Determination of low-temperature behaviour of
elastomers - Principles and test methods
DIN
DIN EN ISO 14730:2015-02
In Force
2015-02-01
Ophthalmic optics - Contact lens care products - Antimicrobial
preservative efficacy testing and guidance on determining discard date
(ISO 14730:2014); German version EN ISO 14730:2014
DIN
DIN EN ISO 13426-1:2020-03
In Force
2020-03-01
Geotextiles and geotextile-related products - Strength of internal
structural junctions - Part 1: Geocells (ISO 13426-1:2019); German
version EN ISO 13426-1:2019
DIN
DIN EN ISO 10210:2018-02
In Force
2018-02-01
Plastics - Methods for the preparation of samples for biodegradation
testing of plastic materials (ISO 10210:2012); German version EN ISO 10210:2017
DIN
DIN EN 18120-12:2024-11
In Force
2024-11-01
Packaging - Design for recycling for plastic packaging - Part 12:
Recyclability evaluation process for plastic packaging - Protocols for
PE and PP rigid packaging; German and English version prEN 18120-12:2024
/ Note: Date of issue 2024-10-18
DIN
DIN CEN ISO/TR 8546:2023-07
In Force
2023-07-01
Hand protection - Guidance for selection and use (ISO/TR 8546:2022);
German version CEN ISO/TR 8546:2022
DIN
DIN EN ISO 10363:1995-11
In Force
1995-11-01
Hot-melt adhesives - Determination of thermal stability (ISO
10363:1992); German version EN ISO 10363:1995
DIN
DIN EN 1993-1-11:2024-02
In Force
2024-02-01
Eurocode 3 - Design of steel structures - Part 1-11: Tension components;
German and English version prEN 1993-1-11:2024 / Note: Date of issue
2024-01-12*Intended as replacement for DIN EN 1993-1-11 (2010-12).
DIN
DIN EN ISO 16283-3:2016-09
In Force
2016-09-01
Acoustics - Field measurement of sound insulation in buildings and of
building elements - Part 3: Façade sound insulation (ISO 16283-3:2016);
German version EN ISO 16283-3:2016
DIN
DIN EN ISO 4254-7:2019-12
In Force
2019-12-01
Agricultural machinery - Safety - Part 7: Combine harvesters, forage
harvesters, cotton harvesters and sugar cane harversters (ISO
4254-7:2017, Corrected version 2019-03); German version EN ISO
4254-7:2017 / Note: Applies in conjunction with DIN EN ISO 4254-1
(2016-09).*To be amended by DIN EN ISO 4254-7/A1 (2022-12).
DIN
DIN EN ISO 10993-7:2022-09
In Force
2022-09-01
Biological evaluation of medical devices - Part 7: Ethylene oxide
sterilization residuals (ISO 10993-7:2008 + Cor 1:2009 + Amd 1:2019);
German version EN ISO 10993-7:2008 + AC:2009 + A1:2022 / Note: To be
replaced by DIN EN ISO 10993-7 (2024-08).
DIN
DIN 16182:1991-09
In Force
1991-09-01
Industrial 90° angle stem liquid-in-glass thermometers with V-shaped
case, of nominal size 110; dimensions and nominal ranges
DIN
DIN EN ISO 105-E13:1997-01
In Force
1997-01-01
Textiles - Tests for colour fastness - Part E13: Colour fastness to
acid-felting: Severe (ISO 105-E13:1994); German version EN ISO 105-E13:1996
DIN
DIN
DIN EN ISO 18635:2016-10
In Force
2016-10-01
Water quality - Determination of short-chain polychlorinated alkanes
(SCCPs) in sediment, sewage sludge and suspended (particulate) matter -
Method using gas chromatography-mass spectrometry (GC-MS) and electron
capture negative ionization (ECNI) (ISO 18635:2016); German version EN
ISO 18635:2016
DIN
DIN EN ISO 15512:2019-09
In Force
2019-09-01
Plastics - Determination of water content (ISO 15512:2019); German
version EN ISO 15512:2019
DIN
DIN EN ISO 21268-3:2020-09
In Force
2020-09-01
Soil quality - Leaching procedures for subsequent chemical and
ecotoxicological testing of soil and soil-like materials - Part 3:
Up-flow percolation test (ISO 21268-3:2019); German version EN ISO 21268-3:2019
DIN
DIN EN ISO 8781-3:1995-04
In Force
1995-04-01
Pigments and extenders - Methods of assessment of dispersion
characteristics - Part 3: Assessment from the change in gloss (ISO
8781-3:1990); German version EN ISO 8781-3:1995
DIN
DIN EN 3475-811:2023-07
In Force
2023-07-01
Aerospace series - Cables, electrical, aircraft use - Test methods -
Part 811: Unbalance attenuation; English version prEN 3475-811:2023 /
Note: Date of issue 2023-06-02*Intended as replacement for DIN EN
3475-811 (2009-10).
DIN
DIN 55673:2017-04
In Force
2017-04-01
Paints, varnishes and their raw materials - Analysis by near infrared
spectrometry - General working principles
DIN
DIN 51460-3:2016-12
In Force
2016-12-01
Testing of petroleum products - Method for sample preparation - Part 3:
Unpressurized digestion with mineral acids
DIN
DIN 51367:1991-08
In Force
1991-08-01
Testing of metal working fluids; determination of the stability of
emulsified metal working fluids in hard water
DIN
DIN EN ISO 22065:2021-02
In Force
2021-02-01
Workplace air - Gases and vapours - Requirements for evaluation of
measuring procedures using pumped samplers (ISO 22065:2020); German
version EN ISO 22065:2020
DIN
DIN EN ISO 21268-2:2020-09
In Force
2020-09-01
Soil quality - Leaching procedures for subsequent chemical and
ecotoxicological testing of soil and soil-like material - Part 2: Batch
test using a liquid to solid ratio of 10 l/kg dry matter (ISO
21268-2:2019); German version EN ISO 21268-2:2019
DIN
DIN EN 18120-10:2024-11
In Force
2024-11-01
Packaging - Design for recycling for plastic packaging - Part 10:
Recyclability evaluation process for plastic packaging - Protocols for
PET bottles; German and English version prEN 18120-10:2024 / Note: Date
of issue 2024-10-18
DIN
DIN 85005-2:2017-05
In Force
2017-05-01
Ships and marine technology - Graphical symbols for technical
documentation - Part 2: Piping and hose assemblies, pipe and hose
joints, penetrations; Text in German and English
DIN
DIN EN ISO 27501:2019-06
In Force
2019-06-01
The human-centred organization - Guidance for managers (ISO 27501:2019);
German version EN ISO 27501:2019
DIN
DIN 19051-20:1991-03
In Force
1991-03-01
Test patterns for micrography; test exposures made to establish the
conditions for microfilming of drawings
DIN
DIN EN ISO 25177:2020-04
In Force
2020-04-01
Soil quality - Field soil description (ISO 25177:2019); German version
EN ISO 25177:2019
DIN
DIN EN ISO 8780-2:1995-04
In Force
1995-04-01
Pigments and extenders - Methods of dispersion for assessment of
dispersion characteristics - Part 2: Dispersion using an oscillatory
shaking machine (ISO 8780-2:1990); German version EN ISO 8780-2:1995
DIN
DIN EN 17999:2023-09
In Force
2023-09-01
Accessible systems for living independently - Requirements and
recommendations; German and English version prEN 17999:2023 / Note: Date
of issue 2023-08-11
DIN
DIN 65557:1989-09
In Force
1989-09-01
Aerospace; pan head screws with ribbed TORQ-SET (ACR) recess and MJ
thread, fully threaded, titanium alloy; nominal tensile strength 1100
MPa, for temperatures up to 315 °C
DIN
DIN 30912-1:1990-10
In Force
1990-10-01
Sintered metal materials; sint-guide-lines; part 1: machining of
sintered parts
DIN
DIN EN ISO 13894-2:2015-06
In Force
2015-06-01
High-pressure decorative laminates - Composite elements - Part 2:
Specifications for composite elements with wood-based substrates for
interior use (ISO 13894-2:2005); German version EN ISO 13894-2:2015
DIN
DIN EN ISO 16773-1:2016-12
In Force
2016-12-01
Electrochemical impedance spectroscopy (EIS) on coated and uncoated
metallic specimens - Part 1: Terms and definitions (ISO 16773-1:2016);
German version EN ISO 16773-1:2016
DIN
DIN EN ISO 7494-1:2018-10
In Force
2018-10-01
Dentistry - Stationary dental units and dental patient chairs - Part 1:
General requirements (ISO 7494-1:2018); German version EN ISO 7494-1:2018
DIN
DIN EN ISO 11074/A1:2020-11
In Force
2020-11-01
Soil quality - Vocabulary - Amendment 1 (ISO 11074:2015/Amd.1:2020);
German version EN ISO 11074:2015/A1:2020 / Note: To be replaced by DIN
EN ISO 11074 (2023-03).
DIN
DIN EN ISO 8780-1:1995-04
In Force
1995-04-01
Pigments and extenders - Methods of dispersion for assessment of
dispersion characteristics - Part 1: Introduction (ISO 8780-1:1990);
German version EN ISO 8780-1:1995
DIN
DIN EN ISO 17142:2016-11
In Force
2016-11-01
Fine ceramics (advanced ceramics, advanced technical ceramics) -
Mechanical properties of ceramic composites at high temperature in air
at atmospheric pressure - Determination of fatigue properties at
constant amplitude (ISO 17142:2014); German version EN ISO 17142:2016
DIN
DIN EN ISO 22259:2021-04
In Force
2021-04-01
Conference systems - Equipment - Requirements (ISO 22259:2019); German
version EN ISO 22259:2021
