Normas DIN
Filtrar:
DIN
DIN EN 10217-7:2021-06
In Force
2021-06-01
Welded steel tubes for pressure purposes - Technical delivery conditions
- Part 7: Stainless steel tubes; German version EN 10217-7:2021
DIN
DIN EN 10204:2005-01
In Force
2005-01-01
Metallic products - Types of inspection documents; German version EN 10204:2004
DIN
DIN 9810:2017-02
In Force
2017-02-01
Food processing machinery - Cutting sets for mincers - System Unger
DIN
DIN CEN/TS 1948-5:2015-06;DIN SPEC 33970:2015-06
In Force
2015-06-01
Stationary source emissions - Determination of the mass concentration of
PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of
PCDDs/PCDFs and PCBs; German version CEN/TS 1948-5:2015
DIN
DIN EN 10051:2024-07
In Force
2024-07-01
Continuously hot-rolled strip and plate/sheet cut from wide strip of
non-alloy and alloy steels - Tolerances on dimensions and shape; German
version EN 10051:2024
DIN
DIN
DIN EN 10296-2 Berichtigung 1:2007-06
In Force
2007-06-01
Welded circular steel tubes for mechanical and general engineering
purposes - Technical delivery conditions - Part 2: Stainless steel;
German version EN 10296-2:2005, Corrigenda to DIN EN 10296-2:2006-02;
German version EN 10296-2:2005/AC:2007
DIN
DIN EN 16931-1:2025-10
In Force
2025-10-01
Electronic invoicing - Part 1: Semantic data model of the core elements
of an electronic invoice; German and English version prEN 16931-1:2025 /
Note: Date of issue 2025-09-12*Intended as replacement for DIN EN
16931-1 (2020-12).
DIN
DIN EN 1677-1:2009-03
In Force
2009-03-01
Components for slings - Safety - Part 1: Forged steel components, Grade
8; German version EN 1677-1:2000+A1:2008
DIN
DIN EN 17422:2022-09
In Force
2022-09-01
Chemical disinfectants and antiseptics - Quantitative surface test for
the evaluation of teat disinfectants used in the veterinary area - Test
method and requirements (phase 2 step 2); German version EN 17422:2022 /
Note: To be replaced by DIN EN 17422 (2024-09).
DIN
DIN EN 1706:2021-10
In Force
2021-10-01
Aluminium and aluminium alloys - Castings - Chemical composition and
mechanical properties; German version EN 1706:2020+A1:2021 / Note:
Applies in conjunction with DIN EN 576 (2004-01), DIN EN 1559-1
(2011-05), DIN EN 1559-4 (2015-05), DIN EN 1676 (2020-06), DIN EN ISO
8062-3 (2008-09).
DIN
DIN EN 818-2:2008-12
In Force
2008-12-01
Short link chain for lifting purposes - Safety - Part 2: Medium
tolerance chain for chain slings - Grade 8; German version EN
818-2:1996+A1:2008 / Note: DIN EN 818-2 (1996-08) remains valid
alongside this standard until 2009-12-28.
DIN
DIN EN 573-3:2025-04
In Force
2026-05-01
Aluminium and aluminium alloys - Chemical composition and form of
wrought products - Part 3: Chemical composition and form of products;
German and English version prEN 573-3:2025 / Note: Date of issue 2025-03-07
DIN
DIN EN 806-3:2006-07
In Force
2006-07-01
Specifications for installations inside buildings conveying water for
human consumption - Part 3: Pipe sizing - Simplified method; German
version EN 806-3:2006 / Note: Applies in conjunction with DIN EN 806-1
(2001-12), DIN EN 806-2 (2005-06).
DIN
DIN 16833:2024-02
In Force
2024-02-01
Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type
I and PE-RT Type II - General quality requirements, testing; Text in
German and English
DIN
DIN 15402-1:1982-11
In Force
1982-11-01
Lifting hooks for lifting appliances; Ramshorn hooks; Unmaschined parts
DIN
DIN 14096:2014-05
In Force
2014-05-01
Fire precaution regulation - Rules for drafting and placarding
DIN
DIN 15401-2:1983-09
In Force
1983-09-01
Lifting hooks for lifting appliances; Single hooks; Finished parts with
threaded shank
DIN
DIN 15402-2:1983-09
In Force
1983-09-01
Lifting hooks for lifting appliances; Ramshorn hooks; Finished parts
with threaded shank
DIN
DIN 15401-1:1982-11
In Force
1982-11-01
Lifting hooks for lifting appliances; Single hooks; Unmachined parts
DIN
DIN
DIN 1988-300:2012-05
In Force
2012-05-01
Codes of practice for drinking water installations - Part 300: Pipe
sizing; DVGW code of practice
DIN
DIN 18363:2019-09
In Force
2019-09-01
German construction contract procedures (VOB) - Part C: General
technical specifications in construction contracts (ATV) - Painting and
coating work - Coatings
DIN
DIN 1988-200:2012-05
In Force
2012-05-01
Codes of practice for drinking water installations - Part 200:
Installation Type A (closed system) - Planning, components, apparatus,
materials; DVGW code of practice / Note: Applies in conjunction with DIN
EN 806-2 (2005-06).
DIN
DIN
DIN 18942-100:2024-03
In Force
2024-03-01
Earthen materials and products - Part 100: Conformity assessment
DIN
DIN
DIN
DIN 79009:2026-02
In Force
2026-02-01
EPAC bicycles - Environmental test - Safety aspects / Note: DIN SPEC
79009 (2018-10) remains valid alongside this standard until 2026-07-31.
DIN
DIN 7190-2:2017-02
In Force
2017-02-01
Interference fits - Part 2: Calculation and design rules for conical
self-locking pressfits
DIN
DIN
DIN
DIN 7190-1:2017-02
In Force
2017-02-01
Interference fits - Part 1: Calculation and design rules for cylindrical
self-locking pressfits
DIN
DIN 743-1:2012-12
In Force
2012-12-01
Calculation of load capacity of shafts and axles - Part 1: General
DIN
DIN
DIN EN 1789:2024-07
In Force
2024-07-01
Medical vehicles and their equipment - Road ambulances; German version
EN 1789:2020+A1:2023
DIN
DIN EN 1915-2:2025-08
In Force
2025-08-01
Aircraft ground support equipment - General requirements - Part 2:
Stability and strength requirements, calculations and test methods;
German and English version prEN 1915-2:2025 / Note: Date of issue
2025-07-11*Intended as replacement for DIN EN 1915-2 (2009-06).
DIN
DIN EN 1993-1-8/NA:2025-04
In Force
2026-04-01
National Annex to DIN EN 1993-1-8:2025-04 - Eurocode 3 - Design of steel
structures - Part 1-8: Joints / Note: Date of issue 2025-03-21*Applies
in conjunction with DIN EN 1993-1-8 (2021-03).
DIN
DIN EN 1993-1-5/NA:2025-04
In Force
2026-04-01
National Annex to DIN EN 1993-1-5:2025-04 - Eurocode 3 - Design of steel
structures - Part 1-5: Plated structural elements / Note: Date of issue
2025-03-21*Applies in conjunction with DIN EN 1993-1-5 (2022-03).
DIN
DIN EN 18031-1:2025-05
In Force
2025-05-01
Common security requirements for radio equipment - Part 1: Internet
connected radio equipment; German version EN 18031-1:2024
DIN
DIN 1054:2021-04
In Force
2021-04-01
Subsoil - Verification of the safety of earthworks and foundations -
Supplementary rules to DIN EN 1997-1 / Note: Applies in conjunction with
DIN EN 1997-1 (2014-03), DIN EN 1997-1/NA (2010-12).
DIN
DIN
DIN 13-51:2013-10
In Force
2013-10-01
ISO general purpose metric screw threads - Part 51: External screw
threads for transition fits (former: screw threads for interference fit)
- tolerances, limit deviations, limits of sizes
DIN
DIN 10955:2024-01
In Force
2024-01-01
Sensory analysis - Testing of food contact materials and articles (FCM)
DIN
DIN 13-52:2017-05
In Force
2017-05-01
ISO general purpose metric screw threads - Part 52: Multi-start thread
tolerances and deviation of profile
DIN
DIN 51220:2022-10
In Force
2022-10-01
Materials testing machines - General requirements, calibration and
verification of materials testing machines
DIN
DIN 50014:2018-08
In Force
2018-08-01
Standard atmospheres for conditioning and/or testing - Specifications
DIN
DIN
DIN 51094:1996-09
In Force
1996-09-01
Ceramic tiles - Testing of the light fastness and colour fastness of
ceramic tiles for walls and floors
DIN
DIN 50159-1:2022-06
In Force
2022-06-01
Metallic materials - Hardness testing with the UCI method - Part 1: Test method
DIN
DIN
DIN EN 10297-2 Berichtigung 1:2007-06
In Force
2007-06-01
Seamless steel tubes for mechanical and general engineering purposes -
Technical delivery conditions - Part 2: Stainless steel; German version
EN 10297-2:2005, Corrigenda to DIN EN 10297-2:2006-02; German version EN 10297-2:2005/AC:2007
DIN
DIN EN 12101-13:2022-11
In Force
2022-11-01
Smoke and heat control systems - Part 13: Pressure differential systems
(PDS) - Design and calculation methods, installation, acceptance
testing, routine testing and maintenance; German Version EN 12101-13:2022
DIN
DIN EN 10296-2:2006-02
In Force
2006-02-01
Welded circular steel tubes for mechanical and general engineering
purposes - Technical delivery conditions - Part 2: Stainless steel;
German version EN 10296-2:2005
DIN
DIN EN 10297-2:2006-02
In Force
2006-02-01
Seamless steel tubes for mechanical and general engineering purposes -
Technical delivery conditions - Part 2: Stainless steel; German version
EN 10297-2:2005
DIN
DIN EN 12266-1:2025-08
In Force
2025-08-01
Industrial valves - Testing of metallic valves - Part 1: Pressure tests,
test procedures and acceptance criteria - Mandatory requirements; German
and English version prEN 12266-1:2025 / Note: Date of issue
2025-07-18*Intended as replacement for DIN EN 12266-1 (2012-06).
DIN
DIN EN 12831-3:2017-09
In Force
2017-09-01
Energy performance of buildings - Method for calculation of the design
heat load - Part 3: Domestic hot water systems heat load and
characterisation of needs, Module M8-2, M8-3; German version EN
12831-3:2017 / Note: To be amended by DIN EN 12831-3/A1 (2021-04), DIN
EN 12831-3/A100 (2021-09).
DIN
DIN EN 1492-2:2009-05
In Force
2009-05-01
Textile slings - Safety - Part 2: Roundslings made of man-made fibres
for general purpose use; German version EN 1492-2:2000+A1:2008 / Note:
DIN EN 1492-2 (2000-10) remains valid alongside this standard until 2009-12-28.
DIN
DIN EN 1492-1:2009-05
In Force
2009-05-01
Textile slings - Safety - Part 1: Flat woven webbing slings made of
man-made fibres for general purpose use; German version EN
1492-1:2000+A1:2008 / Note: DIN EN 1492-1 (2000-10) remains valid
alongside this standard until 2009-12-28.
DIN
DIN EN 13414-1:2020-03
In Force
2020-03-01
Steel wire rope slings - Safety - Part 1: Slings for general lifting
service; German version EN 13414-1:2003+A2:2008
