Normas DIN
Filtrar:
DIN
DIN CEN/TR 17055:2017-09;DIN SPEC 33890:2017-09
In Force
2017-09-01
Workplace exposure - Measurement of chemical agents complying with the
requirements given in EN 482 and either one of EN 838, EN 1076, EN
13205, EN 13890 and EN 13936 - Choice of procedures; English version
CEN/TR 17055:2017
DIN
DIN CEN/TS 1453-2:2017-06;DIN SPEC 19942:2017-06
In Force
2017-06-01
Plastics piping systems with structured wall pipes for soil and waste
discharge (low and high temperature) inside buildings - Unplasticized
poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of
conformity; German version CEN/TS 1453-2:2017
DIN
DIN
DIN
DIN 55601:1990-09
In Force
1990-09-01
Testing of pigments; determination of a hiding power value of dried
paints using a wedge-shaped layer
DIN
DIN ETS 300392-11-5:2001-08
In Force
2001-08-01
Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 11:
Supplementary services stage 2; Sub-part 11-5: List Search Call (LSC)
(Endorsement of the English version ETS 300392-11-5:2000-09 as German
standard) / Note: Endorsement notice
DIN
DIN ETS 300755:1998-07
In Force
1998-07-01
Digital Enhanced Cordless Telecommunications (DECT) - Data services
profile - Multimedia Messaging Service (MMS) with specific provision for
facsimile services (Service type F, class 2); English version ETS 300755:1997
DIN
DIN SPEC 1168:2010-07
In Force
2010-07-01
Air quality - Approach to uncertainty estimation for ambient air
reference measurement methods; German version CR 14377:2002
DIN
DIN-Fachbericht CEN/TR 13767:2005-01
In Force
2005-01-01
Characterization of sludges - Good practice for sludges incineration
with and without grease and screenings
DIN
DIN CEN/TS 16555-7:2016-05;DIN SPEC 77555-7:2016-05
In Force
2016-05-01
Innovation management - Part 7: Innovation Management Assessment; German
version CEN/TS 16555-7:2015
DIN
DIN CEN ISO/TS 16401-1:2012-06;DIN SPEC 70665:2012-06
In Force
2012-06-01
Electronic fee collection - Evaluation of equipment for conromity to
ISO/TS 17575-2 - Part 1: Test suite structure and test purposes (ISO/TS
16401-1:2012); English version CEN ISO/TS 16401-1:2012
DIN
DIN 54184:2017-10
In Force
2017-10-01
Non-destructive testing - Pulse thermography using optical excitation
DIN
DIN
DIN IEC 60679-2:1997-09
In Force
1997-09-01
Quartz crystal controlled oscillators - Part 2: Guide to the use of
quartz crystal controlled oscillators (IEC 60679-2:1981)
DIN
DIN SPEC 19426-2:2017-09
In Force
2017-09-01
Auto-ID-systems for the digital identification and classification of
Personal Protection Equipment (PPE) - Part 2: Guideline for the
selection of the required equipment for the registration and
identification of PPE
DIN
DIN CEN ISO/TS 16401-2:2012-07;DIN SPEC 70666:2012-07
In Force
2012-07-01
Electronic fee collection - Evaluation of equipment for conformity to
ISO/TS 17575-2 - Part 2: Abstract test suite (ISO/TS 16401-2:2012);
English version CEN ISO/TS 16401-2:2012
DIN
DIN ETS 300758-2:1998-07
In Force
1998-07-01
Digital Enhanced Cordless Telecommunications (DECT) - Integrated
Services Digital Network (ISDN); DECT/ISDN interworking for end system
configuration; Profile Test Specification (PTS) - Part 2: Profile
Specific Test Specification (PSTS) for Portable radio Termination (PT);
English version ETS 300758-2:1997
DIN
DIN ETS 300149:1992-11
In Force
1992-11-01
Terminal Equipment (TE); videotex; audio syntax; english version ETS 300149:1992
DIN
DIN 22011:1993-11
In Force
1993-11-01
Investigations of the raw material in hard-coal-mining; treatment of
exploratory drillings
DIN
DIN ETS 300073:1992-02
In Force
1992-02-01
Videotex presentation layer data syntax; geometric display
(CEPT-recommendation T/TE 06-02, Edinburgh 1988); english version ETS 300073:1990
DIN
DIN EN 508-3:2023-12
In Force
2023-12-01
Roofing and cladding products from metal sheet - Specification for
self-supporting products of steel, aluminium or stainless steel sheet -
Part 3: Stainless steel; German version EN 508-3:2021+A1:2023
DIN
DIN 810:1986-11
In Force
1986-11-01
Machine tools; presses; slide holes for shanks of press tools; dimensions
DIN
DIN ETS 300180:1993-09
In Force
1993-09-01
Integrated Services Digital Network (ISDN); advice of charge: charging
information at the end of the call (AOC-E) supplementary service;
service description; English version ETS 300180:1992
DIN
DIN EN 1992-1-2/NA/A1:2015-09
In Force
2015-09-01
National Annex - Nationally determined parameters - Eurocode 2: Design
of concrete structures - Part 1-2: General rules - Structural fire
design; Amendment A1 / Note: Applies in conjunction with DIN EN 1991-1-2 (2010-12).
DIN
DIN IEC 60483:1988-04
In Force
1988-04-01
Guide to dynamic measurements of piezoelectric ceramics with high
electromechanical coupling; identical with IEC 60483, edition 1976
DIN
DIN EN 13257:2016-12
In Force
2016-12-01
Geotextiles and geotextile-related products - Characteristics required
for use in solid waste disposals; German version EN 13257:2016
DIN
DIN EN 1253-1:2015-03
In Force
2015-03-01
Gullies for buildings - Part 1: Trapped floor gullies with a depth water
seal of at least 50 mm; German version EN 1253-1:2015
DIN
DIN EN 60317-57:2011-06
In Force
2011-06-01
Specifications for particular types of winding wires - Part 57:
Polyamide-imide enamelled round copper wire, class 220 (IEC
60317-57:2010); German version EN 60317-57:2010
DIN
DIN EN 15816:2011-06
In Force
2011-06-01
Polymer-modified bituminous thick coatings for waterproofing -
Resistance to rain; German version EN 15816:2011
DIN
DIN EN 16007:2011-10
In Force
2011-10-01
Animal feeding stuffs - Determination of Ochratoxin A in animal feed by
immunoaffinity column clean-up and High Performance Liquid
Chromatography with fluorescence detection; German version EN 16007:2011
DIN
DIN ISO 3384-1:2022-04
In Force
2022-04-01
Rubber, vulcanized or thermoplastic - Determination of stress relaxation
in compression - Part 1: Testing at constant temperature (ISO 3384-1:2019)
DIN
DIN 28115:2025-02
In Force
2026-04-01
Carbon steel nozzles - PN 10 to PN 40 / Note: Date of issue 2025-01-10
DIN
DIN ETS 300394-2-4:1999-07
In Force
1999-07-01
Terrestrial Trunked Radio (TETRA) - Conformance testing specification -
Part 2: Protocol testing specification for Voice plus Data (V+D);
Sub-part 4: Abstract Test Suite (ATS) for Medium Access Control (MAC)
(Endorsement of the English version ETS 300394-2-4:1998 as German
standard) / Note: Endorsement notice
DIN
DIN EN 16905-4:2017-09
In Force
2017-09-01
Gas-fired endothermic engine driven heat pumps - Part 4: Test methods;
German version EN 16905-4:2017 / Note: This standard is part of the DVGW
body of rules.*To be replaced by DIN EN 16905-4 (2022-08).
DIN
DIN ETS 300393-2:2000-05
In Force
2000-05-01
Terrestrial Trunked Radio (TETRA) - Packet Data Optimized (PDO) - Part
2: Air Interface (AI) (Endorsement of the English version ETS
300393-2:1999 as German standard) / Note: Endorsement notice
DIN
DIN EN 62740:2015-11
In Force
2015-11-01
Root cause analysis (RCA) (IEC 62740:2015); German version EN 62740:2015
DIN
DIN EN 61753-031-3:2015-09
In Force
2015-09-01
Fibre optic interconnecting devices and passive components - Performance
standard - Part 031-3: Non-connectorized single-mode 1xN and 2xN
non-wavelength-selective branching devices for Category U - Uncontrolled
environment (IEC 61753-031-3:2014); German version EN 61753-031-3:2015 /
Note: DIN EN 61753-031-3 (2009-12) remains valid alongside this standard
until 2016-01-20.
DIN
DIN ETS 300506:2001-04
In Force
2001-04-01
Digital cellular telecommunications system (Phase 2) - Security aspects
(Endorsement of the English version ETS 300506:2000-08 as German
standard) / Note: Endorsement notice
DIN
DIN EN 15331:2011-11
In Force
2011-11-01
Criteria for design, management and control of maintenance services for
buildings; German version EN 15331:2011
DIN
