Normas DIN
Filtrar:
DIN
DIN EN 12094-8:2020-11
In Force
2020-11-01
Fixed firefighting systems - Components for gas extinguishing systems -
Part 8: Requirements and test methods for connectors; German and English
version prEN 12094-8:2020 / Note: Date of issue 2020-09-25*Intended as
replacement for DIN EN 12094-8 (2006-07).
DIN
DIN ISO 16000-42:2025-02
In Force
2025-02-01
Indoor air - Part 42: Measurement of the particle number concentration
by condensation particle counters (ISO 16000-42:2023)
DIN
DIN ISO 16079-1:2021-10
In Force
2021-10-01
Condition monitoring and diagnostics of wind turbines - Part 1: General
guidelines (ISO 16079-1:2017)
DIN
DIN SPEC 4102-23:2018-07
In Force
2018-07-01
Fire behaviour of building materials and building components - Part 23:
Roofs - Application rules for test results for roofs tested to DIN
CEN/TS 1187, test method 1, and DIN 4102-7
DIN
DIN ISO 16772:2005-06
In Force
2005-06-01
Soil quality - Determination of mercury in aqua regia soil extracts with
cold-vapour atomic spectrometry or cold-vapour atomic fluorescence
spectrometry (ISO 16772:2004)
DIN
DIN EN ISO 16140-5:2020-12
In Force
2020-12-01
Microbiology of the food chain - Method validation - Part 5: Protocol
for factorial interlaboratory validation for non-proprietary methods
(ISO 16140-5:2020); German version EN ISO 16140-5:2020
DIN
DIN EN ISO 16120-1:2017-09
In Force
2017-09-01
Non-alloy steel wire rod for conversion to wire - Part 1: General
requirements (ISO 16120-1:2017); German version EN ISO 16120-1:2017
DIN
DIN 69001-33:1981-10
In Force
1981-10-01
Machine tools; Multi-spindle heads; Boring spindles Types A and B
DIN
DIN 9430-2:1984-12
In Force
1984-12-01
Aerospace; sampling of semi-finished products in light metals; wrought
aluminium alloys
DIN
DIN
DIN 46225:1976-12
In Force
1976-12-01
Stamped terminals with embrace of the insulation for insulated cables
DIN
DIN
DIN 69001-14:1981-10
In Force
1981-10-01
Machine tools; Multi-spindle heads; Assemblies, Spindle seals Types A to D
DIN
DIN V 4000-124:1998-11
In Force
1998-11-01
Tabular layout of article characteristics for clamping or spreading
clips - Part 124: Fastening elements
DIN
DIN 48113:1973-09
In Force
1973-09-01
Post insulators for switchgears and substation with nominal voltages
greater than 1000 V; co-ordination of the definitions for mechanical
bending strength
DIN
DIN 65099-9:1989-11
In Force
1989-11-01
Aerospace; classification of special workshop facilities; process group
H: arrangement of material flow, lay-out of job environment, transportation
DIN
DIN 41775:1979-04
In Force
1979-04-01
Static power convertors; semiconductor rectifier equipment with
"W"-characteristic for charging of nickel/cadmium and
nickel/iron batteries, requirements
DIN
DIN 14-4:1987-02
In Force
1987-02-01
ISO-metric screw thread; screw threads below 1 mm diameter; limits
DIN
DIN EN ISO 1891-2:2015-01
In Force
2015-01-01
Fasteners - Terminology - Part 2: Vocabulary and definitions for
coatings (ISO 1891-2:2014); Multilingual version EN ISO 1891-2:2014 /
Note: To be amended by DIN EN ISO 1891-2/A1 (2020-04).
DIN
DIN EN ISO 14116:2015-11
In Force
2015-11-01
Protective clothing - Protection against flame - Limited flame spread
materials, material assemblies and clothing (ISO 14116:2015); German
version EN ISO 14116:2015 / Note: To be replaced by DIN EN ISO 14116
(2023-09), DIN EN ISO 14116 (2025-02).
DIN
DIN EN ISO 10722:2020-03
In Force
2020-03-01
Geosynthetics - Index test procedure for the evaluation of mechanical
damage under repeated loading - Damage caused by granular material
(laboratory test method) (ISO 10722:2019); German version EN ISO 10722:2019
DIN
DIN EN ISO 11073-10427:2018-06
In Force
2018-06-01
Health informatics - Personal health device communication - Part 10427:
Device specialization - Power status monitor of personal health devices
(ISO/IEEE 11073-10427:2018); English version EN ISO 11073-10427:2018
DIN
DIN EN ISO 11297-1:2018-09
In Force
2018-09-01
Plastics piping systems for renovation of underground drainage and
sewerage networks under pressure - Part 1: General (ISO 11297-1:2018);
German version EN ISO 11297-1:2018
DIN
DIN EN ISO 4545-3:2018-07
In Force
2018-07-01
Metallic materials - Knoop hardness test - Part 3: Calibration of
reference blocks (ISO 4545-3:2017); German version EN ISO 4545-3:2018
DIN
DIN EN ISO 18541-4:2021-10
In Force
2021-10-01
Road vehicles - Standardized access to automotive repair and maintenance
information (RMI) - Part 4: Conformance test (ISO 18541-4:2021); German
version EN ISO 18541-4:2021
DIN
DIN EN ISO 18674-2:2017-03
In Force
2017-03-01
Geotechnical investigation and testing - Geotechnical monitoring by
field instrumentation - Part 2: Measurement of displacements along a
line: Extensometers (ISO 18674-2:2016); German version EN ISO 18674-2:2016
DIN
DIN EN ISO 14644-16:2020-06
In Force
2020-06-01
Cleanrooms and associated controlled environments - Part 16: Energy
efficiency in cleanrooms and separative devices (ISO 14644-16:2019);
German version EN ISO 14644-16:2019
DIN
DIN EN ISO/IEC 25066:2020-08
In Force
2020-08-01
Systems and software engineering - Systems and software Quality
Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for
Usability - Evaluation Report (ISO/IEC 25066:2016); German version EN
ISO/IEC 25066:2019
DIN
DIN EN ISO 4490:2018-08
In Force
2018-08-01
Metallic powders - Determination of flow rate by means of a calibrated
funnel (Hall flowmeter) (ISO 4490:2018); German version EN ISO 4490:2018
DIN
DIN EN ISO 10993-16:2018-02
In Force
2018-02-01
Biological evaluation of medical devices - Part 16: Toxicokinetic study
design for degradation products and leachables (ISO 10993-16:2017);
German version EN ISO 10993-16:2017
DIN
DIN EN ISO 4045:2018-09
In Force
2018-09-01
Leather - Chemical tests - Determination of pH and difference figure
(ISO 4045:2018); German version EN ISO 4045:2018
DIN
DIN EN ISO 2592:2018-01
In Force
2018-01-01
Petroleum and related products - Determination of flash and fire points
- Cleveland open cup method (ISO 2592:2017); German version EN ISO 2592:2017
DIN
DIN EN ISO 15175:2019-08
In Force
2019-08-01
Soil quality - Characterization of contaminated soil related to
groundwater protection (ISO 15175:2018); German version EN ISO 15175:2018
DIN
DIN EN ISO 17201-1:2019-06
In Force
2019-06-01
Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle
blast by measurement (ISO 17201-1:2018); German version EN ISO 17201-1:2018
DIN
DIN EN ISO 21801-1:2021-09
In Force
2021-09-01
Cognitive accessibility - Part 1: General guidelines (ISO 21801-1:2020);
German version EN ISO 21801-1:2021
DIN
DIN EN ISO 10651-5:2021-11
In Force
2021-11-01
Lung ventilators for medical use - Particular requirements for basic
safety and essential performance - Part 5: Gas-powered emergency
resuscitators (ISO 10651-5:2006); German version EN ISO 10651-5:2021
DIN
DIN EN ISO 1833-16:2019-10
In Force
2019-10-01
Textiles - Quantitative chemical analysis - Part 16: Mixtures of
polypropylene fibres with certain other fibres (method using xylene)
(ISO 1833-16:2019); German version EN ISO 1833-16:2019
DIN
DIN EN ISO 16610-61:2020-05
In Force
2020-05-01
Geometrical product specification (GPS) - Filtration - Part 61: Linear
areal filters: Gaussian filters (ISO 16610-61:2015 + Amd 1:2019); German
version EN ISO 16610-61:2015 + A1:2020
DIN
DIN EN ISO 663:2017-05
In Force
2017-05-01
Animal and vegetable fats and oils - Determination of insoluble
impurities content (ISO 663:2017); German version EN ISO 663:2017
DIN
DIN EN ISO 7864:2016-12
In Force
2016-12-01
Sterile hypodermic needles for single use - Requirements and test
methods (ISO 7864:2016); German version EN ISO 7864:2016
