Normas DIN
Filtrar:
DIN
DIN 3523:2022-11
In Force
2022-11-01
Fittings for gas and drinking water installations - Extensions / Note:
This standard is part of the DVGW body of rules.
DIN
DIN 3535-6:2019-04
In Force
2019-04-01
Gaskets for gas supply - Part 6: Gasket material based on fibres,
graphite or polytetrafluoroethylene (PTFE) for gas valves, gas
appliances and gas mains / Note: This standard is part of the DVGW body
of rules.
DIN
DIN 376:2016-02
In Force
2016-02-01
Machine screwing taps for coarse pitch metric ISO-threads M1,6 to M68
DIN
DIN 43673-1:1982-02
In Force
1982-02-01
Drilled holes and screw connections for busbars; Rectangular cross
section busbars
DIN
DIN
DIN 50106:2023-02
In Force
2023-02-01
Testing of metallic materials - Compression test at room temperature
DIN
DIN 5033-9:2024-07
In Force
2024-07-01
Colorimetry - Part 9: Reflectance standard for calibration in
colorimetry and photometry
DIN
DIN 50159-1:2022-06
In Force
2022-06-01
Metallic materials - Hardness testing with the UCI method - Part 1: Test method
DIN
DIN 6650-6:2014-12
In Force
2014-12-01
Dispense systems for draught beverages - Part 6: Requirements for
cleaning and disinfection
DIN
DIN
DIN
DIN
DIN 6885-1:2021-11
In Force
2021-11-01
Drive type fastenings without taper action, parallel keys, keyways -
Deep pattern - Part 1: Dimensions, tolerances, mass
DIN
DIN 65532:1984-07
In Force
1984-07-01
Aerospace; runouts, undercuts and thread ends for MJ-threads to DIN ISO 5855
DIN
DIN 67510-1:2020-05
In Force
2020-05-01
Phosphorescent pigments and products - Part 1: Measurement and marking
at the producer
DIN
DIN
DIN
DIN 30722-2:2025-08
In Force
2025-08-01
Roller contact tipper vehicles, roller containers - General requirements
and marking - Part 2: Roller contact tipper vehicles up to 40 t, roller
containers type 1570 made from steel / Note: DIN 30722-2 (2021-12)
remains valid alongside this standard until 2026-01-31.
DIN
DIN 31067:2026-02
In Force
2026-02-01
Cycles - Electrically power assisted cycles as serial hybrid - SH-EPAC
DIN
DIN
DIN 43535:2012-06
In Force
2012-06-01
Lead-acid batteries - Traction batteries 24 V with cells of dimension
series L in accordance with DIN EN 60254-2 for industrial trucks -
Dimensions, weights, design
DIN
DIN 43147-3:1985-12
In Force
1985-12-01
Electric traction; dropper clamp; sliding dropper clamp for catenaries
DIN
DIN
DIN 51819-2:2016-12
In Force
2016-12-01
Testing of lubricants - Mechanical-dynamic testing in the roller bearing
test apparatus FE8 - Part 2: Test method for lubricating greases -
applied test bearing: oblique ball bearing or tapered roller bearing
DIN
DIN 51604-2:2020-02
In Force
2020-02-01
FAM-testing fluid for polymer materials - Composition and requirements -
Part 2: Testing Fluid B, containing methanol
DIN
DIN 51517-4:2025-05
In Force
2025-05-01
Lubricants - Lubricating oils - Part 4: Lubricating oils C LPX, Minimum requirements
DIN
DIN
DIN 52295:2010-03
In Force
2010-03-01
Testing of glass - Pendulum impact test on containers - Testing by
attributes and by variables
DIN
DIN 51830-1:2022-10
In Force
2022-10-01
Testing of lubricants - Determination of oxidation stability of greases
- Part 1: Rapid method
DIN
DIN 51830-2:2025-02
In Force
2025-02-01
Testing of lubricants - Determination of oxidation resistance of greases
- Part 2: Determination of temperature dependent oxidation induction
time for calculation of the Arrhenius activation energy of
thermo-oxidative degradation
DIN
DIN 22131-3:2016-03
In Force
2016-03-01
Steelcord conveyor belts for hoisting and conveying - Part 3: Testing
DIN
DIN 30652-1:2021-06
In Force
2021-06-01
Excess flow valves - Part 1: Excess flow valves for gas installation /
Note: This standard is part of the DVGW body of rules.
DIN
DIN 30672-1:2019-05
In Force
2019-05-01
Field coating materials for corrosion protection of buried pipelines -
Part 1: Requirements and product testings
DIN
DIN 38406-6:1998-07
In Force
1998-07-01
German standard methods for the examination of water, waste water and
sludge - Cations (group E) - Part 6: Determination of lead by atomic
absorption spectrometry (AAS) (E 6)
DIN
DIN 38407-53:2025-10
In Force
2025-10-01
German standard methods for the examination of water, waste water and
sludge - Jointly determinable substances (group F) - Part 53:
Determination of Trifluoroacetic acid (TFA) in water - Method using
liquid chromatography and mass spectrometric detection (LC-MS/MS) after
direct injection (F 53)
DIN
DIN 38409-16 Berichtigung 1:2018-12
In Force
2018-12-01
German standard methods for the examination of water, waste water and
sludge - General measures of effects and substances (group H) - Part 16:
Determination of the phenol index (H 16); Corrigendum 1
DIN
DIN 45673-8:2018-12
In Force
2018-12-01
Mechanical vibration - Resilient elements used in railway tracks - Part
8: Laboratory test procedures for continuous elastic rail supports
DIN
DIN 45673-9:2015-08
In Force
2015-08-01
Mechanical vibration - Resilient elements used in railway tracks - Part
9: Laboratory test procedures for discrete resilient rail fastening systems
DIN
DIN 46228-4 Berichtigung 1:2023-10
In Force
2023-10-01
End-sleeves - Part 4: Tubular end-sleeves with plastic sleeve;
Corrigendum 1
DIN
DIN 5480-1:2025-10
In Force
2025-10-01
Involute splines based on reference diameters - Part 1: Generalities
