Normas DIN
Filtrar:
DIN
DIN CEN/TS 81-83:2010-02;DIN SPEC 1120:2010-02
In Force
2010-02-01
Safety rules for the construction and installation of lifts - Existing
lifts - Part 83: Rules for the improvement of the resistance against
vandalism; German version CEN/TS 81-83:2009 / Note: To be replaced by
DIN EN 81-83 (2023-07).
DIN
DIN CEN/TS 15901-15:2014-12;DIN SPEC 91218-15:2014-12
In Force
2014-12-01
Road and airfield surface characteristics - Part 15: Procedure for
determining the skid resistance of a pavement surface using a device
with longitudinal controlled slip (LFCI): The IMAG; German version
CEN/TS 15901-15:2014
DIN
DIN CEN/TS 17061:2020-01;DIN SPEC 10487:2020-01
In Force
2020-01-01
Foodstuffs - Guidelines for the calibration and quantitative
determination of pesticide residues and organic contaminants using
chromatographic methods; German version CEN/TS 17061:2019
DIN
DIN ISO 20280:2010-05
In Force
2010-05-01
Soil quality - Determination of arsenic, antimony and selenium in aqua
regia soil extracts with electrothermal or hydride-generation atomic
absorption spectrometry (ISO 20280:2007)
DIN
DIN
DIN CEN/TS 15121-1:2011-03;DIN SPEC 91198:2011-03
In Force
2011-03-01
Postal Services - Hybrid Mail - Part 1: Secured electronic postal
services (SePS) interface specification - Concepts, schemas and
operations; English version CEN/TS 15121-1:2011
DIN
DIN CEN/TS 16115-2:2017-03;DIN SPEC 33975:2017-03
In Force
2017-03-01
Ambient air - Measurement of bioaerosols - Part 2: Planning and
evaluation of plant-related plume measurements; German version CEN/TS 16115-2:2016
DIN
DIN V ENV 13606-4:2000-09
In Force
2000-09-01
Health informatics - Electronic healthcare record communication - Part
4: Messages for the exchange of information; English version ENV
13606-4:2000 / Note: To be replaced by DIN EN 13606-4 (2006-05), DIN EN
ISO 13606-5 (2008-06).
DIN
DIN CEN/TS 16189:2012-05;DIN SPEC 91263:2012-05
In Force
2012-05-01
Sludge, treated biowaste and soil - Determination of linear alkylbenzene
sulfonates (LAS) by high-performance liquid chromatography (HPLC) with
fluorescence detection (FLD) or mass selective detection (MS); German
version CEN/TS 16189:2012
DIN
DIN CEN/TR 16798-16:2018-03;DIN SPEC 32739-16:2018-03
In Force
2018-03-01
Energy performance of buildings - Ventilation for buildings - Part 16:
Interpretation of the requirements in EN 16798-15 - Calculation of
cooling systems (Module M4-7) - Storage; English version CEN/TR 16798-16:2017
DIN
DIN IEC/TS 61994-2:2012-04;DIN SPEC 41994-2:2012-04
In Force
2012-04-01
Piezoelectric, dielectric and electrostatic devices and associated
materials for frequency control, selection and detection - Glossary -
Part 2: Piezoelectric and dielectric filters (IEC/TS 61994-2:2011)
DIN
DIN CEN/TS 16634:2014-06;DIN SPEC 16570:2014-06
In Force
2014-06-01
Personal identification - Recommendations for using biometrics in
European Automated Border Control; English version CEN/TS 16634:2014
DIN
DIN CEN/TS 15901-14:2016-05;DIN SPEC 91218-14:2016-05
In Force
2016-05-01
Road and airfield surface characteristics - Part 14: Procedure for
determining the skid resistance of a pavement surface using a device
with longitudinal controlled slip (LFCN): ViaFriction (Road Analyser and
Recorder of ViaTech AS); German version CEN/TS 15901-14:2016
DIN
DIN SPEC 32534-2:2011-09
In Force
2011-09-01
Numerical welding simulation - Execution and documentation - Part 2:
Documentation template; Text in German and English
DIN
DIN ISO 15709:2006-06
In Force
2006-06-01
Soil quality - Soil water and the unsaturated zone - Definitions,
symbols and theory (ISO 15709:2002)
DIN
DIN ISO 10958-2:2016-05
In Force
2016-05-01
Snowboards - Binding mounting area - Part 2: Requirements and test
methods for snowboards with inserts (ISO 10958-2:2015)
DIN
DIN ISO 14859:2013-09
In Force
2013-09-01
Ships and marine technology - Sound reception systems (ISO 14859:2012)
DIN
DIN ISO 3442-1:2010-08
In Force
2010-08-01
Machine tools - Dimensions and geometric tests for self-centring chucks
with two-piece jaws - Part 1: Manually operated chucks with tongue and
groove type jaws (ISO 3442-1:2005)
DIN
DIN ISO 8406:2010-05
In Force
2010-05-01
Tools for moulding - Mould bases - Round locating elements and spacers
(ISO 8406:2008)
DIN
DIN ISO 18910:2005-12
In Force
2005-12-01
Imaging materials - Photographic film and paper - Determination of curl
(ISO 18910:2000)
DIN
DIN EN 12255-9:2021-09
In Force
2021-09-01
Wastewater treatment plants - Part 9: Odour control and ventilation;
German and English version prEN 12255-9:2021 / Note: Date of issue
2021-08-06*Intended as replacement for DIN EN 12255-9 (2002-04).
DIN
DIN ISO 11352:2024-09
In Force
2024-09-01
Water quality - Estimation of measurement uncertainty based on
validation and quality control data (ISO/DIS 11352:2024); Text in German
and English / Note: Date of issue 2024-08-02*Intended as replacement for
DIN ISO 11352 (2013-03).
DIN
DIN CEN/TR 16349:2012-11;DIN SPEC 18047:2012-11
In Force
2012-11-01
Framework for a specification on the avoidance of a damaging
Alcali-Silica Reaction (ASR) in concrete; English version CEN/TR 16349:2012
DIN
DIN CEN/TS 17171:2018-10;DIN SPEC 19679:2018-10
In Force
2018-10-01
Management of observed hydrometric data - Guidance; German version
CEN/TS 17171:2018
DIN
DIN EN ISO 13533:2002-12
In Force
2002-12-01
Petroleum and natural gas industries - Drilling and production equipment
- Drill-through equipment (ISO 13533:2001); German version EN ISO
13533:2001 (Text in German and English)
DIN
DIN EN ISO 7822:2000-01
In Force
2000-01-01
Textile glass reinforced plastics - Determination of void content - Loss
on ignition, mechanical disintegration and statistical counting methods
(ISO 7822:1990); German version EN ISO 7822:1999
DIN
DIN EN 3660-025:2013-06
In Force
2013-06-01
Aerospace series - Cable outlet accessories for circular and rectangular
electrical and optical connectors - Part 025: Cable outlet, style A,
straight, unsealed, with cable tie strain relief for EN 3646 - Product
standard; German and English version EN 3660-025:2013
DIN
DIN EN 1846-3:2013-11
In Force
2013-11-01
Firefighting and rescue service vehicles - Part 3: Permanently installed
equipment - Safety and performance; German version EN 1846-3:2013 /
Note: DIN EN 1846-3 (2008-11) remains valid alongside this standard
until 2014-03-01.
DIN
DIN EN 2667-2:2018-03
In Force
2018-03-01
Aerospace series - Non-metallic materials - Foaming structural adhesives
- Test methods - Part 2: Compressive tube shear; German and English
version EN 2667-2:2018
DIN
DIN EN 131-7:2013-09
In Force
2013-09-01
Ladders - Part 7: Mobile ladders with platform; German version EN 131-7:2013
DIN
DIN EN 12871:2013-09
In Force
2013-09-01
Wood-based panels - Determination of performance characteristics for
load bearing panels for use in floors, roofs and walls; German version
EN 12871:2013
DIN
DIN EN 2346-005:2018-02
In Force
2018-02-01
Aerospace series - Cable, electrical, fire resistant - Operating
temperatures between -65 °C and 260 °C - Part 005: DW family, single UV
laser printable and multicore assembly - Light weight - Product
standard; German and English version EN 2346-005:2017
DIN
DIN EN 15020/A1:2025-05
In Force
2025-05-01
Railway applications - Rescue coupler - Performance requirements,
specific interface geometry and test methods; German and English version
EN 15020:2022/prA1:2025 / Note: Date of issue 2025-04-11*Intended as an
amendment to DIN EN 15020 (2022-10).
DIN
DIN EN 62943:2018-01
In Force
2018-01-01
Visible light beacon system for multimedia applications (IEC
62943:2017); German version EN 62943:2017
DIN
DIN 32711-2:2023-09
In Force
2023-09-01
Shaft-hub-connection - Polygon profile P3G - Part 2: Calculation and dimensioning
DIN
DIN EN 15534-6:2018-01
In Force
2018-01-01
Composites made from cellulose-based materials and thermoplastics
(usually called wood-polymer composites (WPC) or natural fibre
composites (NFC)) - Part 6: Specifications for fencing profiles and
elements; German version EN 15534-6:2015+A1:2017
DIN
DIN EN 4840-001:2018-11
In Force
2018-11-01
Aerospace series - Heat shrinkable moulded shapes - Part 001: Technical
specification; German and English version EN 4840-001:2018
DIN
DIN EN 12819:2019-06
In Force
2019-06-01
LPG equipment and accessories - Inspection and requalification of LPG
pressure vessels greater than 13 m<(hoch)3>; German version EN 12819:2019
DIN
DIN EN 140401-802 Berichtigung 1:2018-02
In Force
2018-02-01
Detail specification: Fixed low power film SMD resistors - Rectangular -
Stability classes 1; 2; German version EN 140401-802:2007 + A1:2010 +
A2:2013 + A3:2017; Corrigendum 1
DIN
DIN EN 17042:2018-08
In Force
2018-08-01
Fertilizers - Determination of boron in concentrations > 10 % using
acidimetric titration; German version EN 17042:2018
