Normas DIN
Filtrar:
DIN
DIN EN 2240-001:2010-04
In Force
2010-04-01
Aerospace series - Lamps, incandescent - Part 001: Technical
specification; German and English version EN 2240-001:2009
DIN
DIN EN 2866:2010-04
In Force
2010-04-01
Aerospace series - Nuts, anchor, self-locking, floating, one lug, with
counterbore, in steel, cadmium plated, MoS<(Index)2> lubricated -
Classification: 1100 MPa (at ambient temperature)/235 °C; German and
English version EN 2866:2009
DIN
DIN EN 1114-1:2012-01
In Force
2012-01-01
Plastics and rubber machines - Extruders and extrusion lines - Part 1:
Safety requirements for extruders; German version EN 1114-1:2011
DIN
DIN EN 1089-3:2011-10
In Force
2011-10-01
Transportable gas cylinders - Gas cylinder identification (excluding
LPG) - Part 3: Colour coding; German version EN 1089-3:2011 / Note: DIN
EN 1089-3 (2004-06) remains valid alongside this standard until 2012-01-01.
DIN
DIN ISO 8640-4:1997-05
In Force
1997-05-01
Textile machinery and accessories - Flat warp knitting machines,
vocabulary - Part 4: Stitch bonding machines and stitch bonding devices
(ISO 8640-4:1996)
DIN
DIN EN 2283:2011-02
In Force
2011-02-01
Aerospace series - Testing of aircraft wiring; German and English
version EN 2283:2010
DIN
DIN EN 15274:2015-06
In Force
2015-06-01
General purpose adhesives for structural assembly - Requirements and
test methods; German version EN 15274:2015
DIN
DIN ISO 10002:2019-07
In Force
2019-07-01
Quality management - Customer satisfaction - Guidelines for complaints
handling in organizations (ISO 10002:2018)
DIN
DIN EN 771-5:2015-11
In Force
2015-11-01
Specification for masonry units - Part 5: Manufactured stone masonry
units; German version EN 771-5:2011+A1:2015
DIN
DIN EN 3753:2010-06
In Force
2010-06-01
Aerospace series - Nuts, anchor, self-locking, fixed, 60° corner, with
counterbore, in alloy steel, cadmium plated, MoS<(Index)2>
lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C;
German and English version EN 3753:2010
DIN
DIN EN 3435:2010-05
In Force
2010-05-01
Aerospace series - Nuts, anchor, self-locking, floating, two lug,
reduced series, with counterbore, in heat resisting steel, MoS(Index)2
lubricated - Classification: 1 100 MPa (at ambient temperature) / 315
°C; German and English version EN 3435:2010
DIN
DIN ISO 16632:2022-07
In Force
2022-07-01
Tobacco and tobacco products - Determination of water content -
Gas-chromatographic method (ISO 16632:2021)
DIN
DIN EN 16602-70-28:2015-06
In Force
2015-06-01
Space product assurance - Repair and modification of printed circuit
board assemblies for space use; English version EN 16602-70-28:2014
DIN
DIN EN 14636-2:2010-04
In Force
2010-04-01
Plastics piping systems for non-pressure drainage and sewerage -
Polyester resin concrete (PRC) - Part 2: Manholes and inspection
chambers; German version EN 14636-2:2009
DIN
DIN EN 62137-1-5:2010-01
In Force
2010-01-01
Surface mounting technology - Environmental and endurance test methods
for surface mount solder joint - Part 1-5: Mechanical shear fatigue test
(IEC 62137-1-5:2009); German version EN 62137-1-5:2009
DIN
DIN EN 60191-6-21:2011-03
In Force
2011-03-01
Mechanical standardization of semiconductor devices - Part 6-21: General
rules for the preparation of outline drawings of surface mounted
semiconductor device packages - Measuring methods for package dimensions
of small outline packages (SOP) (IEC 60191-6-21:2010); German version EN 60191-6-21:2010
DIN
DIN ISO 9211-8:2020-11
In Force
2020-11-01
Optics and photonics - Optical coatings - Part 8: Minimum requirements
for coatings used for laser optics (ISO 9211-8:2018)
DIN
DIN ISO 17449:2017-10
In Force
2017-10-01
Road vehicles - Safety glazing materials - Test methods for properties
of electrically heated glazing (ISO 17449:2015)
DIN
DIN EN 1870-17:2015-06
In Force
2015-06-01
Safety of woodworking machines - Circular sawing machines - Part 17:
Manual horizontal cutting cross-cut sawing machines with one saw unit
(radial arm saws); German version EN 1870-17:2012+A1:2015 / Note: To be
replaced by DIN EN ISO 19085-20 (2025-01).
DIN
DIN EN 16602-70-29:2015-06
In Force
2015-06-01
Space product assurance - Determination of offgassing products from
materials and assembled articles to be used in a manned space vehicle
crew compartment; English version EN 16602-70-29:2014
DIN
DIN EN 61753-031-6:2015-07
In Force
2015-07-01
Fibre optic interconnecting devices and passive components - Performance
standard - Part 031-6: Non-connectorized single-mode 1xN and 2xN
non-wavelengthselective branching devices for Category O - Uncontrolled
environment (IEC 61753-031-6:2014); German version EN 61753-031-6:2014
DIN
DIN ISO 8133:2024-01
In Force
2024-01-01
Hydraulic fluid power - Mounting dimensions for accessories for single
rod cylinders, 16 MPa (160 bar) compact series (ISO 8133:2022)
DIN
DIN EN 2240-016:2010-10
In Force
2010-10-01
Aerospace series - Lamps, incandescent - Part 016: Lamp, code 305 -
Product standard; German and English version EN 2240-016:2010 / Note:
Applies in conjunction with DIN EN 2756 (2010-09).
DIN
DIN EN 15852:2010-11
In Force
2010-11-01
Ambient air quality - Standard method for the determination of total
gaseous mercury; German version EN 15852:2010
DIN
DIN EN 1034-6:2010-07
In Force
2010-07-01
Safety of machinery - Safety requirements for the design and
construction of paper making and finishing machines - Part 6: Calender;
German version EN 1034-6:2005+A1:2009 / Note: Applies in conjunction
with DIN EN 1034-1 (2010-12).
DIN
DIN EN 415-5:2010-04
In Force
2010-04-01
Safety of packaging machines - Part 5: Wrapping machines; German version
EN 415-5:2006+A1:2009
DIN
DIN EN 12371:2010-07
In Force
2010-07-01
Natural stone test methods - Determination of frost resistance; German
version EN 12371:2010
DIN
DIN ISO 3946:1986-12
In Force
1986-12-01
Starches and derived products; determination of the total phosphorus
content; spectrophotometric method; identical with ISO 3946, edition 1982
DIN
DIN ISO 48-9:2021-02
In Force
2021-02-01
Rubber, vulcanized or thermoplastic - Determination of hardness - Part
9: Calibration and verification of hardness testers (ISO 48-9:2018)
DIN
DIN ISO 3317:2017-11
In Force
2017-11-01
Assembly tools for screws and nuts - Square drive adaptor with hexagon
or cylindrical flat drive, for power socket wrenches (ISO 3317:2015)
DIN
DIN ISO 23601:2021-11
In Force
2021-11-01
Safety identification - Escape and evacuation plan signs (ISO 23601:2020)
DIN
DIN ISO 13373-1:2002-07
In Force
2002-07-01
Condition monitoring and diagnostics of machines - Vibration condition
monitoring - Part 1: General procedures (ISO 13373-1:2002)
DIN
DIN CEN/TR 16396:2013-01;DIN SPEC 31081:2013-01
In Force
2013-01-01
Playground equipment for children - Replies to requests for
interpretation of EN 1176:2008 and its parts; German version CEN/TR
16396:2012 / Note: Applies in conjunction with DIN EN 1176-1 (2008-08).
DIN
DIN CEN/TS 15606:2010-02;DIN SPEC 1113:2010-02
In Force
2010-02-01
Foodstuffs - Determination of acesulfame-K, aspartame,
neohesperidine-dihydrochalcone and saccharin - High performance liquid
chromatographic method; German version CEN/TS 15606:2009
DIN
DIN SPEC 74118:2017-06
In Force
2017-06-01
Road vehicles - R744-Air-conditioning systems - CO2-sensor; Text in
German and English
DIN
DIN CEN/TS 13649:2015-03;DIN SPEC 33969:2015-03
In Force
2015-03-01
Stationary source emissions - Determination of the mass concentration of
individual gaseous organic compounds - Sorptive sampling method followed
by solvent extraction or thermal desorption; German version CEN/TS 13649:2014
DIN
DIN CEN/TS 17249-4:2019-06;DIN SPEC 70009-4:2019-06
In Force
2019-06-01
Intelligent transport systems - eSafety - Part 4: eCall for UNECE
Category T, R, S agricultural/forestry vehicles; German version CEN/TS 17249-4:2019
DIN
DIN ISO 9905 Berichtigung 1:2006-11
In Force
2006-11-01
Technical specification for centrifugal pumps - Class I (ISO 9905:1994),
Corrigenda to DIN ISO 9905:1997-03; German version EN ISO 9905:1997/AC:2006
DIN
DIN ISO 14500:2004-03
In Force
2004-03-01
Textile machinery and accessories - Harnesses for Jacquard weaving
machines - Vocabulary (ISO 14500:2003)
DIN
DIN CEN/TR 15729:2010-11;DIN SPEC 1188:2010-11
In Force
2010-11-01
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP)
based on unsaturated polyester resin (UP) - Report on the determination
of mean abrasion after a defined number of test cycles; German version
CEN/TR 15729:2010
