Normas AFNOR
Filtrar:
AFNOR
NF EN ISO 6360-4
In Force
2004-09-01
Dentistry - Number coding system for rotary instruments - Part 4 :
specific characteristics of diamond instruments
AFNOR
NF P93-523
In Force
2002-09-01
Building site equipment - Temporary metallic stairways intended for
public use
AFNOR
NF EN 300019-2-6
In Force
2023-12-13
Environmental Engineering (EE) - Environmental conditions and
environmental tests for telecommunications equipment - Part 2 :
specification of environmental tests - Sub-part 6: Ship environments (V3.1.1)
AFNOR
NF EN ISO 10555-4
In Force
2023-11-29
Intravascular catheters - Sterile and single-use catheters - Part 4 :
balloon dilatation catheters
AFNOR
NF EN ISO 22476-3
In Force
2005-07-01
Geotechnical investigation and testing - Field testing - Part 3 :
standard penetration test
AFNOR
XP CEN/TS 15901-3
In Force
2011-11-01
Road and airfield surface characteristics - Part 3 : procedure for
determining the skid resistance of a pavement surface using a device
with longitudinal controlled slip (LFCA) : ADHERA
AFNOR
NF EN IEC 62443-4-2
In Force
2019-04-12
Security for industrial automation and control systems - Part 4-2 :
technical security requirements for IACS components
AFNOR
NF EN ISO 5350-1
In Force
2006-11-01
Pulps - Estimation of dirt and shives - Part 1 : inspection of
laboratory sheets by transmitted light
AFNOR
NF EN 10152
Cancelled
2003-09-05
Electrolytically zinc coated cold rolled steel flat products. Technical
delivery conditions.
AFNOR
NF EN 16157-5
In Force
2020-08-05
Intelligent transport systems - Datex II data exchange specifications
for traffic management and information - Part 5 : measured and
elaborated data publications
AFNOR
AFNOR
NF EN ISO 11474
In Force
2014-04-19
Corrosion of metals and alloys - Corrosion tests in artificial
atmosphere - Accelerated outdoor test by intermittent spraying of a salt
solution (Scab test)
AFNOR
NF ISO 5636-5
Cancelled
2014-05-15
Paper and board. Determination of air permeance (medium range). Part 5 :
gurley method.
AFNOR
NF EN ISO 16474-3
In Force
2021-01-20
Paints and varnishes - Methods of exposure to laboratory light sources -
Part 3 : fluorescent UV lamps
AFNOR
NF EN ISO 10893-10
In Force
2011-05-01
Non destructive testing of steel tubes - Part 10 : automated full
peripheral ultrasonic testing of seamless and welded (except submerged
arc-welded) steel tubes for the detection of longitudinal and/or
transverse imperfections
AFNOR
NF EN ISO 787-8
In Force
2001-02-01
General methods of test for pigments and extenders - Part 8 :
determinatio of matter soluble in water - Cold extraction method
AFNOR
NF ISO 7323
In Force
2009-01-01
Rubber, raw and unvulcanized compounded - Determination of plasticity
number and recovery number - Parallel-plate method
AFNOR
NF A36-712-6
In Force
2020-08-01
Unpackaged steels - Metallic coated flat steel products intended for
contact with foodstuffs - Part 6 : aluminium and zinc alloy coated (non
stainless) steels
AFNOR
NF EN ISO 13695
Cancelled
2024-12-26
Optics and photonics - Lasers and laser-related equipment - Test methods
for the spectral characteristics of lasers
AFNOR
NF EN ISO 4080
Cancelled
2014-11-24
Rubber and plastics hoses and hose assemblies. Determination of
permeability to gas.
AFNOR
NF EN ISO 18785-5
In Force
2021-01-13
Friction stir spot welding - Aluminium - Part 5 : quality and inspection requirements
AFNOR
NF EN ISO 22088-5
In Force
2009-09-01
Plastics - Determination of resistance to stress cracking (ESC) - Part 5
: constant tensile deformation method
AFNOR
NF EN 13263-1+A1
In Force
2009-05-01
Silica fume for concrete - Part 1 : definitions, requirements and
conformity criteria
AFNOR
NF EN 12201-1
Cancelled
2024-03-06
Plastics piping systems for water supply, and for drainage and sewerage
under pressure - Polyethylene (PE) - Part 1 : general
AFNOR
NF EN 14157
In Force
2017-10-11
Natural stone test methods - Determination of the abrasion resistance
AFNOR
AFNOR
NF EN 1993-1-6
In Force
2007-07-01
Eurocode 3 : Design of steel structures - Part 1-6 : strength and
stability of shell structures
AFNOR
FD M07-170
In Force
2018-04-18
Petroleum products - Determination of the tax dyes and tracers contents
- Method using high performance liquid chromatography and detection by
UV-Visible spectrometry
AFNOR
AFNOR
NF ISO 10540-3
In Force
2003-04-01
Animal and vegetable fats and oils - Determination of phosphorus content
- Part 3 : method using inductively coupled plasma (ICP) optical
emission spectrometry
AFNOR
NF DTU 40.211
In Force
2015-04-04
Building works - Roof covering made of clay flat interlocking tiles -
Part 1-1 : contract bill of technical model clauses- Building works -
Roof covering made of clay flat interlocking tiles - Part 1-1 : contract
bill of technical model clauses - Building works - Roof covering made of
clay flat interlocking tiles - Part 2 : contract bill of special
administrative model clauses
AFNOR
NF ISO 11933-2
In Force
1997-12-01
Components for containment enclosures. Part 2 : gloves, welded bags,
gaiters for remote-handling tongs and for manipulators.
AFNOR
NF EN ISO 20337
In Force
2019-10-09
Fibre-reinforced plastic composites - Shear test method using a shear
frame for the determination of the in-plane shear stress/shear strain
response and shear modulus
AFNOR
AFNOR
NF EN 14367
In Force
2005-12-01
Non-controllable backflow preventer with different pressure zones -
Family C, type A
AFNOR
NF EN ISO 10416
In Force
2010-08-01
Petroleum and natural gas industries - Drilling fluids - Laboratory testing
AFNOR
AFNOR
NF EN 14037-3
In Force
2016-11-26
Free hanging heating and cooling surfaces for water with a temperature
below 120 oC - Part 3 : pre-fabricated ceiling mounted radiant panels
for space heating - Rating method and evaluation of radiant thermal
output
AFNOR
NF EN 12354-6
In Force
2004-08-01
Building acoustics - Estimation of acoustic performance of buildings
from the performance of elements - Part 6 : sound absorption in enclosed spaces
AFNOR
NF EN 60068-2-69
In Force
2017-08-05
Environmental testing - Part 2-69 : tests - Test Te/Tc : solderability
testing of electronic components and printed boards by the wetting
balance (force measurement) method
