Normas AFNOR
Filtrar:
AFNOR
NF ISO 17334
In Force
2009-05-01
Metallic and other inorganic coatings - Autocatalytic nickel over
autocatalytic copper for electromagnetic shielding
AFNOR
NF EN 45510-5-2
In Force
1998-04-01
Guide for procurement of power station equipment. Part 5-2 : turbines.
Gas turbines.
AFNOR
NF ISO 5599-2/A1
In Force
2004-12-01
Pneumatic fluid power - Five-port directional control valves - Part 2 :
mounting interface surfaces with optional electrical connector
AFNOR
NF ISO 4603/A1
In Force
2011-03-01
Textile glass - Woven fabrics - Determination of thickness - Amendment 1
AFNOR
NF EN 14998
In Force
2005-06-01
Derivatives from coal pyrolysis - Coal tar based oils : fluxing oils -
Specifications and test methods
AFNOR
NF EN 13889+A1
In Force
2009-01-01
Forged steel shackles for general lifting purposes - Dee shackles and
bow shackles - Grade 6 - Safety
AFNOR
NF ISO 22915-21
In Force
2019-10-04
Industrial trucks - Verification of stability - Part 21 : order-picking
trucks with operator position elevating above 1 200 mm
AFNOR
AFNOR
NF EN 60603-6
In Force
1998-06-01
Connectors for frequencies below 3 MHz for use with printed boards. .
Part 6 : edge-docket connectors and printed-board connectors with 2,54
mm (0,1 in) contact spacing for single or double-sided printed boards of
1,6 mm (0,063 in) nominal thickness.
AFNOR
NF EN 9100
In Force
2018-05-30
Quality management systems - Requirements for aviation, space and
defense organizations
AFNOR
NF EN IEC 63121
In Force
2021-12-03
Radiation protection instrumentation - Vehicle-mounted mobile systems
for the detection of illicit trafficking of radioactive materials
AFNOR
NF EN 61169-50
In Force
2015-06-27
Radio-frequency connectors - Part 50 : sectional specification for RF
coaxial connectors with inner diameter of outer conductors 4,11 mm with
quick lock system - Caracteristic impedance 50 Ohm (type QMA)
AFNOR
AFNOR
NF EN IEC 61189-2-807
In Force
2021-10-15
Test methods for electrical materials, printed boards and other
interconnection structures and assemblies - Part 2-807 : test methods
for materials for interconnection structures - Decomposition temperature
( Td) using TGA
AFNOR
NF EN IEC 60695-2-11
In Force
2021-12-03
Fire hazard testing - Part 2-11 : glowing/hot-wire based test methods -
Glow-wire flammability test method for end products (GWEPT)
AFNOR
NF EN 2036
In Force
2017-08-02
Aerospace series - Round steel bars ground - Dimensions - Tolerance h 8
AFNOR
NF EN 62562
In Force
2011-06-01
Cavity resonator method to measure the complex permittivity of low-loss
dielectric plates
AFNOR
NF EN 4180
In Force
2002-04-01
Aerospace series - Circular tubes, fir fluid in titanium alloys - Wide
tolerances - Diameter 4 mm inferior or equal to D inferior or equal to
40 mm - Dimensions
AFNOR
NF EN 12901
In Force
1999-12-01
Products used for treatment of water intended for human consumption -
Inorganic supporting and filtering materials - Definitions
AFNOR
NF EN IEC 60317-72
In Force
2020-06-19
Specifications for particular types of winding wires - Part 72 :
polyester glass-fibre wound silicone resin/varnish impregnated, bare or
enamelled round copper wire, temperature index 200
AFNOR
NF EN IEC 60749-15
In Force
2020-09-25
Semiconductor devices - Mechanical and climatic test methods - Part 15 :
resistance to soldering temperature for through-hole mounted devices
AFNOR
NF EN 13042-3/IN1
In Force
2009-11-01
Machines and plants for the manufacture, treatment and processing of
hollow glass - Safety requirements - Part 3 : IS machines
AFNOR
NF EN 15451
In Force
2008-10-01
Fertilizers - Determination of chelating agents - Determination of iron
chelated by EDDHSA by ion pair chromatography
AFNOR
NF EN 60359
In Force
2003-05-01
Electrical and electronic measurement equipment - Expression of performance
AFNOR
NF EN 60774-1
In Force
1994-06-01
Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic
tape on type VHS. Part 1 : VHS and compact VHS video cassette system.
AFNOR
AFNOR
NF U47-109
In Force
2004-12-01
Animal health analysis methods - Isolation and identification of
Brucella ovis
AFNOR
NF ISO 5611-1
In Force
2016-02-27
Cartridges, type A, for indexable inserts - Part 1 : general survey,
correlation and determination of dimensions
AFNOR
NF EN 50385
In Force
2017-10-06
Product standard to demonstrate the compliance of base station equipment
with radiofrequency electromagnetic field exposure limits (110 MHz - 100
GHz), when placed on the market
AFNOR
NF EN 15765
In Force
2010-03-01
Foodstuffs - Determination of trace elements - Determination of tin by
inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion
AFNOR
NF EN 62320-3
In Force
2015-03-20
Maritime navigation and radiocommunication equipment and systems -
Automatic identification systems (AIS) - Part 3 : AIS Simplex Repeater
Station - Minimum operational and performance requirements, methods of
testing and required test results
AFNOR
NF ISO 9136-1
In Force
2005-10-01
Abrasive grains - Determination of bulk density - Part 1 : macrogrits
AFNOR
NF EN 30-1-1/IN3
In Force
2013-06-08
Domestic cooking appliances burning gas - Part 1-1 : safety - General
AFNOR
NF ISO 15141
In Force
2018-12-28
Cereal and cereal products - Determination of ochratoxin A - High
performance liquid chromatographic method with immunoaffinity column
cleanup and fluorescence detection
AFNOR
NF ETS 300686
In Force
2000-10-01
Business TeleCommunications (BTC) - 34 Mbit/s and 140 Mbit/s digital
leased lines (D34U, D34S, D140U and D140S) - Network interface presentation
AFNOR
E90-350-1
In Force
1994-07-01
Methods for the calibration of vibration and shock pick-ups. Part 1 :
primary vibration calibration by laser interferometry.
AFNOR
NF EN 15380-5
In Force
2014-11-01
Railway applications - Classification system for rail vehicles - Part 5
: System Breakdown Structure (SBS)
AFNOR
NF EN 16158
In Force
2012-05-01
Animal feeding stuffs - Determination of semduramicin content - Liquid
chromatographic method using a "tree" analytical approach
AFNOR
AFNOR
XP CEN/TS 15427-1-3
In Force
2021-08-04
Railway applications - Wheel/Rail friction management - Part 1-3 :
equipment and Application - Adhesion Materials
